This is PermitBase’s published record for Wheat Ridge as of 2026-08-02. It has since been superseded — see the current record. A historical record reflects what PermitBase had verified at that time; it may not capture a real-world change the jurisdiction had made but PermitBase had not yet verified, and it includes any errors we later corrected. Snapshots are never edited retroactively.
Wheat Ridge building permits
VerifiedWheat Ridge, Colorado — as published 2026-08-02.
Verified 2026-07-05 · Source
Codes adopted
As of January 1, 2026: 2024 International Building Code (IBC), excluding Chapter 1 — City of Wheat Ridge Adopted Codes & Amendments page2024 International Residential Code (IRC), excluding Chapter 1, including local Appendices BB, BE, BF, BO, CA, CB, CC, CE, CF, CH2024 International Fuel Gas Code (IFGC), excluding Chapter 1, retaining Section 1022024 International Mechanical Code (IMC), excluding Chapter 1, retaining Section 1022024 International Plumbing Code (IPC), excluding Chapters 1 and 14, retaining Section 1022024 International Energy Conservation Code (IECC), excluding Chapter 1, retaining specified sections2024 International Existing Building Code (IEBC), excluding Chapter 12024 International Swimming Pool and Spa Code (ISPSC), excluding Chapter 1, retaining Sections 102 and 1112024 International Private Sewage Disposal Code (IPSDC), excluding Chapter 1International Property Maintenance Code (IPMC), excluding Chapter 1, retaining Section 1022024 International Fire Code (IFC), excluding Chapter 1, retaining Section 105, adopting Appendices B, C, D, F, H, ONational Electrical Code — latest edition adopted by the Colorado State Electrical Board (2023 NEC as of this review)ICC/ANSI A117.1 — Accessible and Usable Buildings and FacilitiesColorado Model Electric Ready and Solar Ready CodeColorado Model Low Energy and Carbon Code, excluding Chapter 1, retaining specified sectionsAdopted by Ordinance 1883; local amendments consolidated in Chapter 5 of the Wheat Ridge Municipal Code, which reorganizes permit/enforcement/appeals administrative provisions into a single article. Source: City of Wheat Ridge Adopted Codes & Amendments page, https://www.ci.wheatridge.co.us/280/Adopted-Codes-AmendmentsTRANSITION PERIOD: through December 31, 2025, permit applicants may elect to use either the prior 2018 International Codes (adopted by City Council January 13, 2020, effective July 1, 2020) or the new 2024 codes; all new permit applications submitted on or after January 1, 2026 must comply with the 2024 I-Codes. Source: Adopted Codes & Amendments pageForward-looking provision: beginning January 1, 2027, residential fire sprinklers will be required for new townhomes; single-unit detached homes and duplexes remain exempt. Source: Adopted Codes & Amendments page
Permit types & fees
Residential Building Permit (New Construction)
VerifiedRequired for new single-family homes and other new residential construction within Wheat Ridge city limits. Reviewed under the 2024 IRC/IBC (as locally amended per Chapter 5 of the Municipal Code) during the transition; 2018 codes remain electable through December 31, 2025. Issued by the City of Wheat Ridge Building Division.
Verified 2026-07-05 · Source
Requirements
- Plans must comply with the applicable code edition — 2018 or 2024 I-Codes electable through December 31, 2025; 2024 I-Codes mandatory for all applications submitted on/after January 1, 2026
- Submitted and managed electronically through the City's OpenGov permit portal (wheatridgeco.portal.opengov.com)
- Permit fee calculated from the Building Valuation Data Chart applied to the City's Building Permit Fee Schedule; Plan Review Fee (65% of permit fee) due at application; Use Tax (3.5% of 60% of project valuation) collected with the permit
- All contractors must hold a current City of Wheat Ridge contractor license (or valid reciprocal license from Aurora, Boulder, Colorado Springs, Denver, Fort Collins, Pikes Peak Regional Building Department, or Park County) in addition to any required Colorado state trade license
- Permit expires 365 days after issuance regardless of activity
Required documents
- RequiredBuilding Permit Application (OpenGov Portal)Submitted electronically via the City's OpenGov permitting/licensing/inspections portal
- RequiredConstruction DrawingsFull plan set demonstrating compliance with the applicable IRC/IBC edition and local Chapter 5 amendments
- RequiredSite PlanProperty lines, setbacks, and existing/proposed structures
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Building Permit Fee — valuation $1.00 to $500.00 | $26.50 | City of Wheat Ridge Permit Valuation & Fees page, 2026 Budget fee table |
| Building Permit Fee — valuation $2,001 to $25,000 | $77.50 for the first $2,000.00 plus $15.85 for each additional $1,000.00 or fraction thereof | — |
| Building Permit Fee — valuation $100,001 to $500,000 | $1,132.05 for the first $100,000.00 plus $6.45 for each additional $1,000.00 or fraction thereof | — |
| Building Permit Fee — valuation over $1,000,000 | $6,462.05 for the first $1,000,000.00 plus $4.10 for each additional $1,000.00 or fraction thereof | — |
| Plan Review Fee | 65% of the Permit Fee | Due at time of application, per the City's Permit Valuation & Fees page |
| Use Tax | 3.5% of 60% of total project valuation | Collected with the building permit |
Residential Addition / Remodel Permit
VerifiedRequired for room additions, decks, porch covers, window alterations, siding, and other alterations to existing residential structures in Wheat Ridge. Billed on the same valuation-based fee table as new construction; reviewed under the applicable IRC edition.
Verified 2026-07-05 · Source
Requirements
- Permit required for: new buildings, ADUs, room additions, roofing, decks, porch covers, pools/hot tubs deeper than 24 inches, retaining walls over 4 feet high, storage sheds over 120 sq ft, electrical service changes, HVAC replacements, window alterations, and siding — per the City's Building Permits page
- Permits are NOT normally required for painting or minor repairs
- Submitted electronically via the OpenGov portal
- All contractors must hold a current City of Wheat Ridge contractor license
Required documents
- RequiredBuilding Permit Application (OpenGov Portal)Submitted via the City's OpenGov portal; select the appropriate residential alteration/addition project type
- RequiredConstruction DrawingsPlans showing the addition/remodel scope and structural connection to the existing structure
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Building Permit Fee (same valuation-based Fee Table as new construction) | $26.50 minimum, scaling per the valuation tiers in the Permit Fee Schedule | 2026 Budget fee table, Permit Valuation & Fees page |
| Plan Review Fee | 65% of the Permit Fee | — |
| Use Tax | 3.5% of 60% of total project valuation | — |
Electrical Permit
VerifiedRequired for installation, alteration, or repair of electrical systems, including service changes, panel upgrades, and EV charging circuits, in Wheat Ridge. Governed by the latest National Electrical Code edition adopted by the Colorado State Electrical Board (2023 NEC as of this review). State-licensed electricians register with the City rather than sitting a separate city exam.
Verified 2026-07-05 · Source
Requirements
- Permit required for electrical service changes and other electrical work per the Building Permits page's permit-trigger list
- State-licensed electricians register (no separate city exam) by submitting their State of Colorado Master Electrician license and State of Colorado Electrical Contractor license to the City
- Governed by the latest NEC edition adopted by the Colorado State Electrical Board
- Flat-rate trade fee applies for EV charging (residential) and panel upgrades (≤400A) rather than the general valuation table
Required documents
- RequiredElectrical Permit Application (OpenGov Portal / Electrical Service Change form)Apply via OpenGov; a dedicated Electrical Service Change/Upgrade form is also published on the City's Form Center
- RequiredState of Colorado Master Electrician & Electrical Contractor LicensesRequired for registration with the City in lieu of a separate city electrical exam
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| EV Charging Station (Residential) — flat rate | $170 | City of Wheat Ridge Permit Valuation & Fees page, 2026 Budget flat-rate trade permit list |
| Panel Upgrade (≤400A) — flat rate | $170 | — |
| Permit fee — when not covered by a flat-rate trade fee | Calculated per the general valuation-based Fee Schedule ($26.50 minimum) | Applies to electrical work not covered by a published flat-rate item |
| Re-inspection Fee | $85/hour, minimum 1 hour (City's Permit Valuation & Fees page); a separate $60 late-cancellation re-inspection fee is cited on the City's FAQ/Inspections page for day-of cancellations after 8 a.m. | — |
Plumbing Permit
VerifiedRequired for installation, alteration, or repair of plumbing systems in Wheat Ridge, including water heater replacement. Governed by the 2024 International Plumbing Code (IPC), excluding Chapters 1 and 14, retaining Section 102. Plumbing contractors must hold both a Colorado state license and a separate City of Wheat Ridge Class 4 Plumbing license.
Verified 2026-07-05 · Source
Requirements
- Permit required for plumbing installation, alteration, or repair, including water heater replacement
- Contractors must hold the City's Class 4 Plumbing license ($100) in addition to State of Colorado Master Plumber and Plumbing Contractor licenses — unlike electricians, plumbers do not get a registration-only path
- Governed by the 2024 IPC as locally adopted (excluding Chapters 1 and 14, retaining Section 102)
- Water heater replacement is billed at a flat trade rate rather than the general valuation table
Required documents
- RequiredPlumbing Permit Application (OpenGov Portal)Apply via OpenGov under the plumbing permit type
- RequiredCity Class 4 Plumbing LicenseRequired in addition to State of Colorado Master Plumber and Plumbing Contractor licenses
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Water Heater Replacement — flat rate | $60 | City of Wheat Ridge Permit Valuation & Fees page, 2026 Budget flat-rate trade permit list |
| Permit fee — when not covered by a flat-rate trade fee | Calculated per the general valuation-based Fee Schedule ($26.50 minimum) | — |
| Class 4 Plumbing Contractor License | $100 | Contractor Licenses & Registration page |
Mechanical / HVAC Permit
VerifiedRequired for heating, cooling, and ventilation equipment installation or replacement in Wheat Ridge, including furnace replacement. Governed by the 2024 International Mechanical Code (IMC), excluding Chapter 1, retaining Section 102.
Verified 2026-07-05 · Source
Requirements
- Permit required for HVAC replacements per the Building Permits page's permit-trigger list, including furnace replacement
- Governed by the 2024 IMC as locally adopted
- Contractors must hold the City's Class 5 Mechanical license ($100) or provide qualifying ICC test results/reciprocal license
- Furnace replacement is billed at a flat trade rate rather than the general valuation table
Required documents
- RequiredMechanical Permit Application (OpenGov Portal)Apply via OpenGov under the mechanical/HVAC permit type
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Furnace Replacement — flat rate | $60 | City of Wheat Ridge Permit Valuation & Fees page, 2026 Budget flat-rate trade permit list |
| Permit fee — when not covered by a flat-rate trade fee | Calculated per the general valuation-based Fee Schedule ($26.50 minimum) | — |
| Class 5 Mechanical Contractor License | $100 | Contractor Licenses & Registration page |
Roofing Permit (Reroof)
VerifiedRequired for roofing and re-roofing work on residential and commercial buildings in Wheat Ridge. Governed by the applicable IRC/IBC roofing provisions plus City-specific nailing and ice-and-water-shield rules. Roofing contractors are licensed under the City's Class 7 Tested Specialty category.
Verified 2026-07-05 · Source
Requirements
- Roofing is listed among the project types requiring a permit on the City's Building Permits page
- Asphalt shingles must be nailed with a minimum of six (6) nails per shingle — City of Wheat Ridge FAQ page
- Ice and water shield must extend two feet inside the exterior wall line at eaves
- Drip edge is required
- Roofing contractors are licensed under Class 7 (Tested Specialty), covering roofing, gas piping, fire suppression, and low-voltage work ($100 license fee)
Required documents
- RequiredResidential Roofing Permit Application (OpenGov Portal / City Form Center)A dedicated Residential Roofing Permit Application form is published on the City's Form Center in addition to the general OpenGov portal path; the form's full internal checklist (beyond the nailing/ice-shield/drip-edge rules published on the FAQ page) was not independently retrievable from the public-facing page content during this review
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Permit fee — valuation-based (general Fee Schedule) | $26.50 minimum, scaling per the valuation tiers | No dedicated flat-rate reroof fee was found published separately from the general valuation-based Fee Schedule; City of Wheat Ridge Permit Valuation & Fees page |
| Re-inspection Fee | $85/hour, minimum 1 hour | — |
Solar PV Permit
VerifiedRequired for installation of residential solar photovoltaic systems in Wheat Ridge. Billed at a flat rate distinct from the general valuation-based Fee Schedule; plan review fees are due at application, with building permit and other applicable fees paid at issuance.
Verified 2026-08-02 · Source
Requirements
- Solar PV installation requires a permit application through the City's Form Center / OpenGov portal
- Plan review fees are required at the time of the solar PV installation permit application; building permit and other applicable fees are paid later at permit issuance
- As of January 1, 2026, all new permit applications, including solar, must comply with the 2024 I-Codes
Required documents
- RequiredSolar PV Installation Permit Application (Form Center / OpenGov Portal)Dedicated Solar PV Installation permit application form published on the City's Form Center in addition to the general OpenGov portal path
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Solar PV (Residential) — flat rate | $500 | City of Wheat Ridge Permit Valuation & Fees page, 2026 Budget flat-rate trade permit list |
| Solar PV (Commercial) — flat rate | $1,000 | ADDED 2026-08-02: printed on the same Permit Valuation & Fees page (2026 adopted budget, 'Project Specific Fees' table), re-fetched and read live: 'Commercial Solar PV Install (includes plan check) 1,000', distinct from the $500 residential line above. |
Electric Vehicle Charger Permit
VerifiedRequired for installation of electric vehicle charging equipment in Wheat Ridge. Residential EV charging is billed at a flat rate (including plan check) distinct from the general valuation-based Fee Schedule; commercial EV charging is billed on the standard valuation-based table.
Verified 2026-07-20 · Source
Requirements
- EV charger installation requires a permit application through the City's OpenGov portal (or Form Center for legacy trade-specific forms)
- Residential Electric Vehicle Charging permit fee includes plan check as part of the flat rate
- Commercial Electric Vehicle Charging is billed on the standard valuation-based Building Permit Fee Schedule rather than a flat rate
- As of January 1, 2026, all new permit applications, including EV charger installs, must comply with the 2024 I-Codes and current NEC edition adopted by the Colorado State Electrical Board
- A licensed electrical contractor registered with the City (State of Colorado Master Electrician / Electrical Contractor license) must be signed onto the permit
Required documents
- RequiredElectric Vehicle Charging Permit Application (OpenGov Portal)Online application through the City's OpenGov permitting portal
- RequiredElectrical Load Calculations / One-Line DiagramTypically required to demonstrate the existing electrical service can support the added EV charging load
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Electric Vehicle Charging — Residential (flat rate, includes plan check) | $170 | City of Wheat Ridge Permit Valuation & Fees page, 2026 Budget flat-rate trade permit list — verified directly against the page's raw fee table |
| Electric Vehicle Charging — Commercial | Based on valuation | City of Wheat Ridge Permit Valuation & Fees page — billed on the standard valuation-based Building Permit Fee Schedule rather than a flat rate |
Accessory Dwelling Unit (ADU) Permit
VerifiedRequired for construction of an ADU on a single-unit dwelling lot in Wheat Ridge. Legalized citywide by Ordinance 1744 (effective August 15, 2022); the underlying building permit follows the standard City of Wheat Ridge Building Permit process and fee schedule.
Verified 2026-07-05 · Source
Requirements
- ADUs allowed in all residential, agricultural, planned development, and mixed-use neighborhood zone districts as an accessory use to a single-unit home; NOT permitted on duplex or multi-unit properties
- Maximum size: 1,000 sq ft or 50% of the main house's gross floor area (including attached garage), whichever is more restrictive; units of 500-750 sq ft are always allowed provided they remain smaller than the main house; detached ADU footprint capped at 1,000 sq ft
- Height: detached ADUs capped at 25 feet; attached ADUs must follow the main house's height requirements
- ADUs cannot be subdivided or sold separately from the main house
- No additional off-street parking required for a standard ADU (short-term-rental use of an ADU triggers separate STR parking standards)
- All sides of a new ADU must be within 150 feet of an approved fire access road, or fire sprinklers may be required; attached ADUs require a fire-rated wall separation from the primary dwelling
- Existing (built before August 15, 2022) unpermitted ADUs have until August 15, 2026 to apply for legal status
- Governed by Ordinance 1744, approved July 11, 2022, effective August 15, 2022
Required documents
- OptionalExisting ADU Application (Form Center)Dedicated form for owners seeking to legalize a pre-existing ADU built before the ordinance's effective date
- RequiredBuilding Permit Application (OpenGov Portal)Standard City of Wheat Ridge building permit process applies to new ADU construction
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Building Permit Fee (same valuation-based Fee Table as new construction) | $26.50 minimum, scaling per the valuation tiers in the Permit Fee Schedule | No ADU-specific fee variance was found published on the City's ADU page; standard Building Permit Fee Schedule and Use Tax apply |
Demolition Permit
VerifiedRequired for demolition of structures in Wheat Ridge. Billed as a flat fee scaled by site size (under vs. over 1 acre) rather than the general valuation-based schedule.
Verified 2026-07-05 · Source
Requirements
- Demolition of a building or structure requires a permit
- Class 1 (Unlimited General Contractor) license holders are authorized to perform demolition of all or any part of a building or structure on a site where they will build new construction, remodel, alter, or repair an existing building
- Fee is flat-rate, scaled by site acreage rather than project valuation
Required documents
- RequiredDemolition Permit Application (OpenGov Portal)Apply via the OpenGov portal under the demolition permit type; a detailed public-facing checklist beyond the fee schedule was not independently retrievable from the City's site during this review
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Demolition — under 1 acre | $100 | City of Wheat Ridge Permit Valuation & Fees page, 2026 Budget fee table |
| Demolition — 1 acre or more | $1,000 | — |
Fence / Retaining Wall Permit
VerifiedRequired for retaining walls over 4 feet high in Wheat Ridge, per the City's own Building Permits page permit-trigger list. Fencing contractors (untested specialty trade) are licensed under the City's Class 8 category.
Verified 2026-07-05 · Source
Requirements
- Retaining walls over 4 feet high require a building permit, per the City's Building Permits page
- Fencing contractors fall under the City's Class 8 (Untested Specialty) contractor license category, alongside signage and other trades without ICC exams
- A more detailed fence-height permit threshold beyond the retaining-wall figure above was not found independently published on the City's site during this review
Required documents
- RequiredBuilding/Zoning Permit Application (OpenGov Portal)Apply via the OpenGov portal under the applicable exterior/zoning permit type
- RequiredSite PlanShowing fence/wall location relative to property lines
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Permit fee — valuation-based (general Fee Schedule) | $26.50 minimum, scaling per valuation tiers | No fence/retaining-wall-specific flat fee was found published; billed under the general Permit Valuation & Fees schedule |
Commercial Building Permit (New Construction / Shell)
VerifiedRequired for new commercial construction and shell buildings in Wheat Ridge. Not a separate application track or portal from residential — same OpenGov permit portal and the same general valuation-based Building Permit Fee Schedule apply — but commercial projects are distinguished by occupancy-based ICC Building Valuation Data (BVD) valuation, a distinct 'Shell Only' valuation modifier, a longer published review-timeline sub-range, and a higher-tier contractor license requirement.
Verified 2026-08-02 · Source
Requirements
- Building permit required for new construction, additions, and alterations per the City's Building Permits page 'Do I Need a Permit?' list, which applies to all occupancy types (not split by residential vs. commercial in that list itself)
- Reviewed under the applicable code edition — 2018 or 2024 I-Codes electable through December 31, 2025; 2024 I-Codes (including 2024 IBC, excluding Chapter 1) mandatory for all applications submitted on/after January 1, 2026
- Submitted and managed electronically through the City's OpenGov permit portal (wheatridgeco.portal.opengov.com), same as all other Wheat Ridge building permits
- 'Shell Only' construction (a new building shell without interior tenant build-out) is valued at 80% of the appropriate occupancy's ICC Building Valuation Data (BVD) figure, per the City's 2026 Budget 'Project Specific Valuation' table on the Permit Valuation & Fees page — a minimum valuation floor applied before the general fee calculation, distinct from a fully finished ground-up building valued at the standard 100% BVD figure for its occupancy type
- Permit fee is then calculated from that valuation using the same general valuation-based Building Permit Fee Schedule used for residential construction (see the residential-building-permit entry's fee tiers in this file); Plan Review Fee (65% of permit fee) due at application; Use Tax (3.5% of 60% of project valuation) collected with the permit
- General contractors typically need the City's Class 1 (Unlimited General Contractor — unlimited building type/size, all structural work) or Class 2 (Limited General Contractor — Type III/IV/V buildings not exceeding 3 stories, excluding Educational/Institutional/Hazardous occupancies) license; Class 3 (Residential General Contractor) is scoped only to single-unit/duplex/townhome residential structures and is not valid for commercial occupancy types. Source: Contractor Licenses & Registration page
- Permit expires 365 days after issuance regardless of activity, same citywide rule as all other permit types
- Certain permits require 'proof of submission' to West Metro Fire District or Arvada Fire District (both require separate online plan-review submittals) as an attachment before the City will complete its own review — commonly applicable to commercial-scope projects. Source: Building Permits page, 'Permit Review' section
Required documents
- RequiredBuilding Permit Application (OpenGov Portal)Submitted electronically via the City's OpenGov permitting/licensing/inspections portal — the same portal and general application path used for all Wheat Ridge building permits; no separate paper commercial-specific application or public submittal checklist beyond the OpenGov portal itself was found published on the City's site during this review
- RequiredConstruction DrawingsFull plan set demonstrating compliance with the applicable IBC edition and local Chapter 5 amendments for the proposed occupancy classification
- RequiredSite PlanProperty lines, setbacks, and existing/proposed structures
- OptionalProof of Fire/Water/Sanitation District SubmittalPrinted confirmation (email or portal confirmation page) of a separate online submittal to West Metro Fire District or Arvada Fire District, where the project falls within one of those special districts' review scope
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Shell Only construction — valuation basis | 80% of the appropriate occupancy's ICC Building Valuation Data (BVD) figure | City of Wheat Ridge Permit Valuation & Fees page, 2026 Budget 'Project Specific Valuation' table — a minimum valuation floor fed into the general Building Permit Fee Schedule below, not a standalone flat fee. Show full citationHideCity of Wheat Ridge Permit Valuation & Fees page, 2026 Budget 'Project Specific Valuation' table — a minimum valuation floor fed into the general Building Permit Fee Schedule below, not a standalone flat fee. SPOT-CHECK 2026-08-02: re-fetched this page live, 'Project Specific Valuation' tab, Miscellaneous row reads verbatim 'Shell Only — 80% — of appropriate occupancy' — confirmed, unchanged. |
| Building Permit Fee — valuation $1.00 to $500.00 (same general Fee Schedule as all other permit types) | $26.50 | City of Wheat Ridge Permit Valuation & Fees page, 2026 Budget fee table; full tier schedule documented in this file's residential-building-permit entry |
| Building Permit Fee — valuation over $1,000,000 | $6,462.05 for the first $1,000,000.00 plus $4.10 for each additional $1,000.00 or fraction thereof | — |
| Plan Review Fee | 65% of the Permit Fee | Due at time of application |
| Use Tax | 3.5% of 60% of total project valuation | Collected with the building permit |
Tenant Improvement / Tenant Finish Permit
Required for interior build-out of tenant space within an existing commercial building or shell in Wheat Ridge (e.g., a new retail, office, or restaurant fit-out). Valued at 20% of the appropriate occupancy's ICC Building Valuation Data (BVD) figure per the City's 2026 Budget fee schedule — a distinct, lower valuation modifier than the 80% figure used for a new 'Shell Only' building.
Reviewed 2026-08-02 · Source
Requirements
- Falls under 'Interior remodels' and 'Basement and tenant finishes' on the City's Building Permits page 'Do I Need a Permit?' list — the same list applies citywide and is not itself split into a residential vs. commercial sub-list
- Valued at 20% of the appropriate occupancy's ICC Building Valuation Data (BVD) figure, per the City's 2026 Budget 'Project Specific Valuation' table (listed under 'Miscellaneous' as 'Tenant Finish,' separately from the R-3-occupancy 'Interior Remodels' category used for residential basement finishes/kitchen/bath remodels) — a minimum valuation floor distinct from the 80% 'Shell Only' figure used for the underlying base building
- Permit fee is then calculated from that valuation using the same general valuation-based Building Permit Fee Schedule as all other Wheat Ridge permits; Plan Review Fee (65% of permit fee) due at application; Use Tax (3.5% of 60% of project valuation) collected with the permit
- Submitted and managed electronically through the City's OpenGov permit portal, same as all other Wheat Ridge building permits
- Reviewed under the applicable code edition — 2018 or 2024 I-Codes electable through December 31, 2025; 2024 I-Codes mandatory for all applications submitted on/after January 1, 2026
- General contractors typically need the City's Class 1 or Class 2 general contractor license for non-residential occupancy tenant space; Class 3 (Residential General Contractor) is not valid for commercial occupancy types. Source: Contractor Licenses & Registration page
- Permit expires 365 days after issuance regardless of activity, same citywide rule as all other permit types
Required documents
- RequiredBuilding Permit Application (OpenGov Portal)Submitted electronically via the City's OpenGov portal; no separate paper tenant-finish-specific application or public submittal checklist beyond the OpenGov portal itself was found published on the City's site during this review
- RequiredTenant Finish Construction DrawingsPlan set showing the interior scope of work, occupancy classification, and code compliance for the tenant space
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Tenant Finish — valuation basis | 20% of the appropriate occupancy's ICC Building Valuation Data (BVD) figure | City of Wheat Ridge Permit Valuation & Fees page, 2026 Budget 'Project Specific Valuation' table — a minimum valuation floor fed into the general Building Permit Fee Schedule below, not a standalone flat fee |
| Building Permit Fee — valuation-based (general Fee Schedule, same tiers as all other permit types) | $26.50 minimum, scaling per the valuation tiers in the Permit Fee Schedule | 2026 Budget fee table, Permit Valuation & Fees page |
| Plan Review Fee | 65% of the Permit Fee | — |
| Use Tax | 3.5% of 60% of total project valuation | — |
Sources & verification
Verified against official sources. Last reviewed 2026-07-05.
Fee schedules
Online permit portal
Codes & ordinances
Department & other records
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Wheat Ridge building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.