Idaho City building inspections
VerifiedInspection sequence, scheduling, and re-inspection fees for building permits in Idaho City, Idaho.
Verified 2026-07-08 · Source
How to schedule
Inspections are requested through the building department below.
- Address
- 511 Main St., PO Box 130, Idaho City, ID 83631
- Phone
- (208) 392-4584
- Office hours
- Mon–Thu 8:00 AM – 4:30 PM (closed 12:00–1:00 PM); Fri by appointment
- Website
- Official site
Published scheduling rules
- Building inspections are handled through the Boise County Building Department's Building Inspection Line at (208) 781-8565 (48 hours' notice required) — this is the same contact number printed on the City's own Building Permit Application, not a separate city inspector. (Commercial Building Permit (New Construction & Additions))
- Building inspections (footing, foundation, sheathing, framing, energy, final) are conducted through the Boise County Building Department's Building Inspection Line, (208) 781-8565 — the same phone number Idaho City's own Building Permit Application lists as its inspection/plan-review contact (Jon Watkins); call at least 48 hours in advance and have your permit number ready (Commercial Building Permit (New Construction & Additions))
- Inspections applicable to the scope of work are conducted through the Boise County Building Department's Building Inspection Line, (208) 781-8565 — a purely cosmetic/non-structural interior remodel would generally only trigger the Energy and Final inspections rather than the full footing-through-final sequence used for new construction (Tenant Improvement / Commercial Remodel Permit)
- Idaho City's own Building Permit Application lists inspection/plan-review contact 'Jon Watkins' at (208) 781-8565 — the same phone number published as the Boise County Building Department's 'Building Inspection Line' (office at 413 Main St., Idaho City). Building inspections (footing, foundation, sheathing, framing, energy, final) for City permits appear to be conducted through the Boise County Building Department rather than a separate City inspector, consistent with the common small-Idaho-town pattern of contracting inspections to the county. (General)
Inspection sequence
Applies to: Commercial Building Permit (New Construction & Additions)
- 1
Footing / Holes / Columns / Pads
After forms are set, reinforcing is tied in place, and property lines are clearly marked — before concrete is placed. Conducted by the Boise County Building Department per its published Inspection Requirements.
- 2
Foundation / Wall
After forms and reinforcing materials are in place but before concrete is placed
- 3
Wall and Roof Sheathing
Before house wrap or siding is placed; wall and roof nailing pattern is checked
- 4
Framing
After roof/wall sheathing and all framing, fire blocking, bracing, and weather barrier are in place, and after electrical/plumbing/HVAC rough-ins are signed off by state (DOPL) inspectors — before insulation is placed
- 5
Energy
Before the interior is covered; insulation installer must certify type, manufacturer, and R-value installed per the adopted energy code
- 6
Final
Last inspection, done after all code-related work is complete and before occupancy; electrical, plumbing, and HVAC finals (DOPL) must already be approved. Required before a Certificate of Occupancy will be issued.
Applies to: Residential Building Permit (New Construction, Additions & Alterations)
- 1
Foundation / Footings
Before concrete pour — forms, rebar, footing size and depth, and anchor bolt placement per the residential structural plan review checklist
- 2
Framing
Floor framing, wall bracing, roof framing, and structural connections before wall cover — per the 2017 Idaho Residential Code
- 3
Final
All work complete per approved plans, ready for occupancy
Applies to: Tenant Improvement / Commercial Remodel Permit
- 1
Footing / Foundation / Framing (if structural work is part of the TI scope)
Only applicable if the remodel involves structural alterations, new openings, or foundation work — conducted by the Boise County Building Department per its published Inspection Requirements
- 2
Energy
If the TI affects the building thermal envelope or insulation — before the area is covered; insulation installer must certify type, manufacturer, and R-value
- 3
Final
Required for all TI/remodel projects — done after all permitted work is complete; electrical, plumbing, and HVAC finals (DOPL) must already be approved for any trade work included in the project
Applies to: Electric Vehicle (EV) Charger / EVSE Permit
- 1
Rough Electrical (DOPL)
Circuit, conduit, and disconnect placement before concealment, if applicable — inspected by the state-assigned DOPL electrical inspector for Boise County/Idaho City
- 2
Final Electrical (DOPL)
Charger mounted, circuit labeled, and installation verified per the National Electrical Code as adopted statewide by DOPL
Applies to: Solar Photovoltaic (PV) Permit
- 1
Foundation/Footing (ground-mount) or Framing (rooftop racking)
Racking or ground-mount foundation structural attachment verified before panels are installed
- 2
Final
All work complete per approved plans; electrical interconnection is separately inspected by Idaho DOPL, not the City
Final inspection only: Demolition Permit
Re-inspection fees
Sources & verification
Verified against official sources. Last reviewed 2026-07-08.
Fee schedules
Applications & forms
Checklists & handouts
Codes & ordinances
Department & other records
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Idaho City building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Idaho City building permits
Get alerts for Idaho City
We'll email you when Idaho City's fees, documents, or codes change — not often.
We only use your email to send permit updates. No spam, unsubscribe anytime. Privacy.