This is PermitBase’s published record for Idaho Falls as of 2026-07-20. It has since been superseded — see the current record. A historical record reflects what PermitBase had verified at that time; it may not capture a real-world change the jurisdiction had made but PermitBase had not yet verified, and it includes any errors we later corrected. Snapshots are never edited retroactively.
Idaho Falls building permits
VerifiedIdaho Falls, Idaho — as published 2026-07-20.
Verified 2026-07-03 · Source
Codes adopted
Idaho has a mandatory statewide baseline building code under the Idaho Building Code Act (Idaho Code Title 39, Chapter 41), administered locally by certified jurisdictions. The City of Idaho Falls independently administers its own Building Division (Department of Community Development Services) and adopts its own codes and amendments by ordinance under Idaho Falls City Code Title 7 (Building Regulations), rather than relying on the Idaho Division of Building Safety for direct administration. Source: Idaho Falls City Code Title 7, https://www.idahofallsidaho.gov/DocumentCenter/View/139/Title-7---Building-Regulations-PDF2018 International Building Code (IBC), published by the International Code Council, adopted as the official building code of the City per Idaho Falls City Code § 7-1-1, with local amendments in § 7-1-2 (e.g., day-care/custodial-care occupancy classifications, relocatable building provisions). Source: Idaho Falls City Code Title 7, Chapter 12018 International Residential Code (IRC) for One- and Two-Family Dwellings, including Appendix M, adopted per Idaho Falls City Code § 7-6-1, with local amendments in § 7-6-2 (e.g., owner-occupied lodging house exceptions, Table R301.2(1) design criteria, Section R405.1 exception). Source: Idaho Falls City Code Title 7, Chapter 6Idaho State Plumbing Code, adopted statewide in 2017 pursuant to Idaho Code Title 54, Chapter 26, and adopted as the City's official Plumbing Code per Idaho Falls City Code § 7-5-1, with local amendments in § 7-5-2 (Chapter 1 replaced with 2018 IBC Chapter 1; fixture-count table cross-referenced to the City's 2018 IBC). The Idaho State Plumbing Code is based on the Uniform Plumbing Code (per City of Idaho Falls Plumbing page, citing epubs.iapmo.org/2017/Idaho/) and is administered at the state level by the Idaho Division of Occupational and Professional Licenses (DOPL) Plumbing Bureau for licensing, but permits within Idaho Falls city limits are issued and inspected by the City's own Building Division, not DOPL. Source: Idaho Falls City Code Title 7, Chapter 5; City of Idaho Falls Plumbing pageNational Electrical Code (NEC), adopted per Idaho Falls City Code § 7-8-1 as "the same National Electric Code adopted by the State of Idaho pursuant to Idaho Code Section 54-1001" (Ord. 3627, 9-11-25); the City of Idaho Falls Electrical page identifies the currently adopted edition as the 2023 NEC (NFPA 70). Electrical permits within Idaho Falls city limits are issued and inspected by the City's own Building Division (Chief Electrical Inspector and Electrical Inspector on staff), not the Idaho DOPL Electrical Bureau. Source: Idaho Falls City Code Title 7, Chapter 8; City of Idaho Falls Electrical page and staff directory2018 International Mechanical Code (IMC) and 2018 International Fuel Gas Code (IFGC), per the City of Idaho Falls Mechanical page's Documents, Codes & Resources list. Mechanical/HVAC permits within Idaho Falls city limits are issued and inspected by the City's own Building Division (Chief Plumbing/Mechanical Inspector and Mechanical Inspector on staff). Source: City of Idaho Falls Mechanical page2018 International Energy Conservation Code (IECC), adopted per Idaho Falls City Code § 7-11-1, with local amendments in § 7-11-2 (industrial/manufacturing equipment exemption; large-building air-leakage testing exception). Source: Idaho Falls City Code Title 7, Chapter 112018 International Property Maintenance Code (IPMC), adopted per Idaho Falls City Code § 7-2-1. Source: Idaho Falls City Code Title 7, Chapter 22018 International Fire Code (IFC), adopted per Idaho Falls City Code Title 7, Chapter 10 (referenced in Title 7 table of contents; administered by the Idaho Falls Fire Department). Source: Idaho Falls City Code Title 7, Chapter 102018 International Existing Building Code (IEBC), adopted per Idaho Falls City Code Title 7, Chapter 12. Source: Idaho Falls Municipal Code Online, Title 7 Chapter 12Idaho Falls City Code Title 11, Comprehensive Zoning, governs land-use, setback, fence-height, and accessory dwelling unit (ADU) standards enforced in conjunction with Building Division permitting. Source: Idaho Falls City Code Title 11
Permit types & fees
Residential Building Permit (New Construction)
VerifiedRequired for new construction of single-family and two-family dwellings in Idaho Falls. Reviewed against the 2018 IRC and 2018 IECC as adopted by Idaho Falls City Code Title 7. Applications are submitted through the City's Cityworks online permitting portal, which replaced the prior eTrakit system beginning April 1, 2024.
Verified 2026-07-03 · Source
Requirements
- Building permit required for new one- and two-family dwelling construction per IRC Section R105.1 as adopted by the City
- Plans must comply with the 2018 IRC and 2018 IECC as adopted by Idaho Falls City Code Title 7, Chapters 6 and 11
- A complete digital set of building plans with accurate scales, submitted via the Cityworks portal
- Site plan showing all property lines, zoning setbacks, legal description, job address, north arrow, new/existing structures with dimensions, and street infrastructure profile
- Fully dimensioned floor plans (1/4" = 1'-0") showing all window/door sizes, glazing in hazardous locations, plumbing fixtures, braced wall panel layout, framing plans, beam/header/post sizing, room identification with smoke/CO detector locations, and wall/ceiling heights
- All four elevations (1/4" or 1/8" = 1'-0") showing extent of foundation walls and footings below finished grade
- Building sections showing wall section (roof to footing), stair sections (handrail/guardrail heights, riser/tread dimensions), and foundation section with rebar schedule
- Energy code compliance certificate (REScheck or Prescriptive Path) and a Heating Design Report (Manual J Load Calculation)
- Floor joist/floor truss layout and complete roof truss layout/design package from the manufacturer
- Structural engineered design required for designs falling outside prescriptive code provisions
- City-licensed General Contractor required unless the homeowner is performing the work on their own single-family residence (Homeowner as General Contractor Form required if applicable)
- Sites over 5,000 sq ft requiring excavation require a City of Idaho Falls Certified Erosion Control Contractor on the project
Required documents
- RequiredCityworks New Residential Construction and Addition Permit ApplicationSubmitted online via the Cityworks portal; requires property owner/applicant/contractor information, parcel number, project valuation, square footage per floor, and whether temporary power is needed
- RequiredSite PlanProperty lines, setbacks, legal description, job address, north arrow, existing/proposed structures
- RequiredArchitectural Drawings, Floor Joist/Truss Layout, Roof Truss DesignFull construction drawing set per the Residential Plans Requirements List, including stamped engineered plans where applicable
- RequiredHeat Load Calculation / Signed Prescriptive Path FormEnergy code compliance documentation (Manual J and REScheck or Prescriptive Path)
- OptionalHomeowner as General Contractor FormRequired only if the homeowner is acting as their own general contractor
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Residential Building Permit Fee — valuation $1 to $499 | $30.18 | City of Idaho Falls Fee Schedule (October 2025), item 2.6.a.i |
| Residential Building Permit Fee — valuation $10,000 to $19,999 | $164.97 | City of Idaho Falls Fee Schedule (October 2025), item 2.6.a.iv |
| Residential Building Permit Fee — valuation $100,000 to $104,999 | $458.00 | City of Idaho Falls Fee Schedule (October 2025), item 2.6.a.xiii |
| Residential Building Permit Fee — valuation $500,000 to $1,000,000 | $2,865.25 for the first $500,000, plus $4.10 for each additional $1,000 of valuation or fraction thereof | City of Idaho Falls Fee Schedule (October 2025), item 2.6.a.xciii |
| Residential Building Permit Fee — valuation $1,000,001 and beyond | $4,972.74 for the first $1,000,000, plus $2.67 for each additional $1,000 of valuation or fraction thereof | City of Idaho Falls Fee Schedule (October 2025), item 2.6.a.xciv |
| New Residential Dwelling Unit Valuation Multiple | $90.00 per square foot | City of Idaho Falls Fee Schedule (October 2025), item 2.9.a — used to establish permit valuation when not otherwise provided |
| Finished Basement Total Valuation Multiple | $25.00 per square foot | City of Idaho Falls Fee Schedule (October 2025), item 2.9.b |
| Unfinished Basement / Wood Frame Garage Valuation Multiple | $15.00 per square foot | City of Idaho Falls Fee Schedule (October 2025), item 2.9.c |
| Residential Plan Check Fee | 25% of the permit valuation | City of Idaho Falls Fee Schedule (October 2025), item 2.8.a |
| Residential Combination Mechanical/Electrical/Plumbing (MEP) Fee | $0.08 per square foot total | City of Idaho Falls Fee Schedule (October 2025), item 2.13.f |
| Residential Combination Energy Code Fee | $55.00 each | City of Idaho Falls Fee Schedule (October 2025), item 2.13.g |
| Permit Issuance Fee | $30.18 each | City of Idaho Falls Fee Schedule (October 2025), item 2.13.a |
Residential Addition / Remodel Permit
VerifiedRequired for additions, remodels, and structural alterations to existing one- and two-family dwellings in Idaho Falls, including patio covers, carports, attached/detached garages, and basement finishes. Reviewed against the 2018 IRC as adopted by Idaho Falls City Code Title 7. Apply through the Cityworks portal.
Verified 2026-07-03 · Source
Requirements
- Building permit required for additions, remodels, and alterations, including changes to plumbing and electrical systems
- Any detached structure (including sheds) over 120 square feet that will house property, equipment, or people requires a building permit, per City of Idaho Falls FAQ guidance
- Patio covers and carports require a building permit; must be designed for eastern Idaho snow and wind loads
- Attached/Detached Garages, Additions, and Patio Covers: two complete sets of plans drawn to scale on paper at least 18" x 24", including plot plan (footprint, acreage, property lines/dimensions, setbacks, grading, drainage, parking/driveways/easements, right-of-way locations), floor plans, elevations, building sections, door/window schedules, and Model Energy Code worksheets
- Basement Finish permits require a completed Residential Building Permit Application plus a complete basement floor plan with dimensions, room identification, and window/door/egress-window locations and sizes; any room used for sleeping purposes must have an egress window
- City Licensed General Contractor required unless the homeowner is performing the work on their own home
Required documents
- RequiredCityworks Residential Remodel Permit ApplicationSubmitted via the Cityworks portal; requires detailed scope of work and before/after architectural, electrical, mechanical, and plumbing plans and details
- OptionalPatio Cover, Addition, Detached/Attached Garage Plan SubmittalCity of Idaho Falls two-set plan submittal package (plot plan, floor plans, elevations, building sections, door/window schedules, Model Energy Code worksheet, truss framing plan)
- OptionalBasement Finish Permit Required DocumentsCompleted Residential Building Permit Application plus dimensioned basement floor plan showing egress windows for sleeping rooms
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Residential Building Permit Fee — valuation-based (same schedule as new construction) | $30.18 minimum ($1-$499 valuation), scaling per the Residential Building Permit Fee Valuation Table | City of Idaho Falls Fee Schedule (October 2025), item 2.6 |
| Foundation Only Permit | $100.00 | City of Idaho Falls Fee Schedule (October 2025), item 2.11.g |
| Egress Window Permit | $30.18 | City of Idaho Falls Fee Schedule (October 2025), item 2.11.f |
| Permit Issuance Fee | $30.18 | City of Idaho Falls Fee Schedule (October 2025), item 2.13.a |
Electrical Permit
VerifiedRequired for electrical installation, alteration, or repair work in Idaho Falls, governed by the National Electrical Code as adopted by the City (currently the 2023 NEC, matching the State of Idaho's adopted edition per Idaho Code Section 54-1001). Electrical permits within city limits are issued and inspected directly by the City of Idaho Falls Building Division (Chief Electrical Inspector and Electrical Inspector on staff), not the Idaho DOPL Electrical Bureau.
Verified 2026-07-03 · Source
Requirements
- Electrical permit required for installation, alteration, or repair of any hard-wired electrical system per NEC/IBC Section 105.1 as adopted by the City
- Governed by the National Electrical Code edition currently adopted by the State of Idaho (2023 NEC per the City's Electrical page) per Idaho Falls City Code § 7-8-1
- Commercial new/remodeled lighting (including exterior lighting) requires an IECC Section 805 lighting compliance form completed via COMcheck 3.6.x, submitted to the City electrical inspector before the electrical permit is issued
- Electrical contractors must hold state licensure (Idaho DOPL Electrical Bureau); a separate City of Idaho Falls trade license is not required for electricians, though a City Contractor's License is required for the general contractor on the project if applicable
- Apply through the Cityworks portal
Required documents
- RequiredElectrical Permit ApplicationSubmitted online through the Cityworks portal
- OptionalCommercial Lighting Compliance Form (COMcheck)Required for new or remodeled commercial lighting systems per IECC Section 805, submitted to the City electrical inspector before permit issuance
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Residential Electrical Permit | $5.85 per each electrical service | City of Idaho Falls Fee Schedule (October 2025), item 2.11.a |
| Commercial Electrical Wiring Permit — first $20,000 of wiring costs | 1.50% of first $20,000 of wiring costs | City of Idaho Falls Fee Schedule (October 2025), item 2.10.a.i; wiring costs include total cost of equipment, materials, and labor governed by the NEC |
| Commercial Electrical Wiring Permit — wiring costs in excess of $20,000 | 0.75% of wiring costs in excess of $20,000 | City of Idaho Falls Fee Schedule (October 2025), item 2.10.a.ii |
| Permit Issuance Fee | $30.18 | City of Idaho Falls Fee Schedule (October 2025), item 2.13.a |
| Other Inspections and Fees (unlisted inspection, additional plan review) | $70 per hour or hourly cost to City, whichever is greatest (minimum one-half hour charge for plan review, minimum two-hour charge for after-hours inspections) | City of Idaho Falls Fee Schedule (October 2025), items 2.13.b-2.13.e |
Plumbing Permit
VerifiedRequired for plumbing installation, alteration, or repair work in Idaho Falls, governed by the Idaho State Plumbing Code (2017, based on the Uniform Plumbing Code) as adopted by Idaho Falls City Code Title 7, Chapter 5. Plumbing permits within city limits are issued and inspected directly by the City of Idaho Falls Building Division (Chief Plumbing/Mechanical Inspector on staff), not the Idaho DOPL Plumbing Bureau.
Verified 2026-07-03 · Source
Requirements
- Plumbing permit required before beginning any installation, alteration, repair, replacement, or remodeling of a plumbing system
- Permits not required for clearing plumbing stoppages or stopping minor leaks that do not require replacement/rearrangement of pipes or fixtures
- All plumbing work must be completed by an Idaho State-licensed plumbing contractor, except a homeowner performing work on their own primary residence (must occupy the home as primary residence for at least one year after work is completed)
- Governed by the Idaho State Plumbing Code (2017) as adopted and amended by Idaho Falls City Code § 7-5-1 and § 7-5-2
- Apply through the Cityworks portal
Required documents
- RequiredPlumbing Permit ApplicationSubmitted online through the Cityworks portal
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Residential Plumbing Permit — Unit Fee for each Plumbing fixture/installation | $5.10 per installation | City of Idaho Falls Fee Schedule (October 2025), item 2.11.c.i |
| Residential Plumbing Permit — Unit Fee for each Gas Piping System | $5.10 per installation | City of Idaho Falls Fee Schedule (October 2025), item 2.11.c.ii |
| Commercial Plumbing Permit — first $20,000 of bid amount | 1.50% of first $20,000 of bid amount | City of Idaho Falls Fee Schedule (October 2025), item 2.10.c.i; bid amount includes total cost of equipment, materials, and labor governed by the Uniform Plumbing Code |
| Commercial Plumbing Permit — bid amount in excess of $20,000 | 0.75% of bid amount over $20,000 | City of Idaho Falls Fee Schedule (October 2025), item 2.10.c.ii |
| Permit Issuance Fee | $30.18 | City of Idaho Falls Fee Schedule (October 2025), item 2.13.a |
Mechanical / HVAC Permit
VerifiedRequired for heating, ventilation, air conditioning, and related mechanical installations in Idaho Falls, governed by the 2018 International Mechanical Code (IMC) and 2018 International Fuel Gas Code (IFGC). Mechanical permits within city limits are issued and inspected directly by the City of Idaho Falls Building Division (Chief Plumbing/Mechanical Inspector and Mechanical Inspector on staff).
Verified 2026-07-03 · Source
Requirements
- Mechanical permit required for installation, relocation, or replacement of furnaces, HVAC equipment, ductwork, and gas appliance venting
- Governed by the 2018 IMC and 2018 IFGC per the City of Idaho Falls Mechanical page
- Duct design must be completed using Manual J load calculations matching the selected equipment and the contractor's submitted prescriptive insulation values
- For equipment change-outs: a final inspection is sufficient if the existing gas line is reused; a new gas line requires a gas pressure inspection and rough-in inspection before the final
- PVC vent piping must be pressure-tested and labeled with the test date and the name of the person who verified the test
- An air balance report must be uploaded to the permit prior to final inspection
- Apply through the Cityworks portal
Required documents
- RequiredMechanical Permit ApplicationSubmitted online through the Cityworks portal
- RequiredManual J Load Calculation / Duct DesignDuct design matching the selected equipment and prescriptive insulation values
- RequiredAir Balance ReportRequired to be uploaded to the permit before final inspection
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Residential Mechanical Permit Issuance | $5.10 per installation | City of Idaho Falls Fee Schedule (October 2025), item 2.11.b |
| Commercial Mechanical Permit — first $20,000 of bid amount | 1.50% of first $20,000 of bid amount | City of Idaho Falls Fee Schedule (October 2025), item 2.10.b.i; bid amount includes total cost of equipment, materials, and labor governed by the Uniform Mechanical Code |
| Commercial Mechanical Permit — bid amount in excess of $20,000 | 0.75% of bid amount over $20,000 | City of Idaho Falls Fee Schedule (October 2025), item 2.10.b.ii |
| Permit Issuance Fee | $30.18 | City of Idaho Falls Fee Schedule (October 2025), item 2.13.a |
Re-Roofing Permit
VerifiedRequired for residential and commercial re-roofing in Idaho Falls, governed by the 2018 IBC/IRC and administered through the standard building permit process via the Cityworks portal.
Verified 2026-07-03 · Source
Requirements
- Building permit required for re-roofing per the City's standard building permit process
- Reviewed against the 2018 IBC and 2018 IRC roofing provisions as adopted by Idaho Falls City Code Title 7
- Apply through the Cityworks portal
Required documents
- RequiredBuilding Permit Application (Roofing)Submitted online through the Cityworks portal
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Residential Re-Roofing Permit | 1% of valuation, minimum fee $30.18, maximum fee $110.00 | City of Idaho Falls Fee Schedule (October 2025), item 2.11.d |
| Commercial Re-Roofing Permit — first $20,000 of roofing costs | 1% of first $20,000 of roofing costs | City of Idaho Falls Fee Schedule (October 2025), item 2.10.d.i; maximum fee $3,001 per item 2.10.d |
| Commercial Re-Roofing Permit — roofing costs in excess of $20,000 | 0.79% of roofing costs in excess of $20,000 | City of Idaho Falls Fee Schedule (October 2025), item 2.10.d.ii; maximum fee $3,001 total per item 2.10.d |
| Permit Issuance Fee | $30.18 | City of Idaho Falls Fee Schedule (October 2025), item 2.13.a |
Solar Photovoltaic (PV) Permit
VerifiedRequired for installation of rooftop or ground-mount solar photovoltaic systems in Idaho Falls. The building/electrical permit is issued by the City of Idaho Falls Building Division per standard IBC/NEC review; grid interconnection for net-metered systems is a separate agreement with the City's municipal electric utility, Idaho Falls Power, governed by Idaho Falls City Code Chapter 5, Section 8 and the Idaho Falls Power Service Policy.
Verified 2026-07-03 · Source
Requirements
- Building and/or electrical permit required for the PV installation itself, reviewed against the 2018 IBC and the City-adopted NEC (2023 edition) for interconnection wiring
- Net Metering and Small Generation Interconnection Agreement required with Idaho Falls Power for any customer-generator system connecting to the utility grid, governed by Idaho Falls City Code Chapter 5, Section 8
- Application must identify system type, generator size (kW AC), inverter manufacturer/model/serial number/power rating and location, and be accompanied by a system one-line diagram and equipment specification sheets prepared to generally accepted engineering design practices
- Installation must be performed by (or under) a licensed electrician, whose name and contractor number are recorded on the interconnection application
- If the customer-generator leases the property, written authorization from the property owner must be attached
Required documents
- RequiredBuilding/Electrical Permit ApplicationSubmitted online through the Cityworks portal for the physical PV installation
- RequiredNet Metering and Small Generation Interconnection Agreement ApplicationSubmitted to Idaho Falls Power (P.O. Box 50220, Idaho Falls, ID 83405, or ifpinfo@ifpower.org) with a system one-line diagram and equipment specification sheets
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Residential Electrical Permit (for PV interconnection wiring) | $5.85 per each electrical service | City of Idaho Falls Fee Schedule (October 2025), item 2.11.a; general electrical permit fee applies, no dedicated solar-specific fee line was found on the City's Fee Schedule |
| Residential Building Permit Fee — valuation-based (if roof-mount racking work requires a building permit) | $30.18 minimum ($1-$499 valuation), scaling per the Residential Building Permit Fee Valuation Table | City of Idaho Falls Fee Schedule (October 2025), item 2.6 |
Accessory Dwelling Unit (ADU) Permit
VerifiedIdaho Falls permits accessory dwelling units (ADUs) on lots with an existing principal single-family dwelling, per Idaho Falls City Code Title 11, Section 11-2-6(N) (Comprehensive Zoning). ADU construction is processed as a Residential Building Permit or Residential Addition/Remodel Permit through the Cityworks portal, subject to the zoning standards below plus standard 2018 IRC/IBC building code review.
Verified 2026-07-03 · Source
Requirements
- ADU may be configured as an integral part of the principal dwelling (any floor or basement), an attached structure, a separate detached structure, or (in Industrial/Commercial zones) a caretaker's residence
- Maximum ADU size: 750 square feet
- Detached ADU must meet the same side-yard setback as the primary structure for the applicable zone
- Detached ADU must have a minimum 12-foot setback from the rear property line, unless adjacent to a public/private alley at least 16 feet wide, in which case Table 11-3-3(3) setbacks apply
- A detached ADU more than 12 feet in height must comply with the height standards of Table 11-3-3(1)
- ADU structure must be well-matched in height, bulk, and site location with the adjoining neighborhood, and (if attached or a separate structure) must share the same architectural design, style, and appearance as the principal dwelling
- ADU must have a separate entrance from the principal dwelling, meet building code requirements for a separate dwelling unit, and be functionally independent
- Recreational vehicles are prohibited as ADUs
- One additional off-street parking space required on the lot (in addition to the principal dwelling's existing minimum); a garage may not be converted to an ADU unless replacement parking is provided elsewhere on the lot
- The property owner must occupy either the principal dwelling or the ADU as their primary residence; this owner-occupancy requirement is enforced through a deed restriction recorded with the Bonneville County Recorder
- Only one ADU is permitted per lot of a principal dwelling unit; ADUs are not counted in density calculations
- The ADU may not be sold separately or converted to a legal ownership form different from the principal dwelling
Required documents
- RequiredCityworks Residential Building/Remodel Permit ApplicationStandard residential permit application via Cityworks, noting ADU scope of work
- RequiredDeed Restriction (Owner-Occupancy)Recorded with the Bonneville County Recorder to enforce the owner-occupancy requirement of Idaho Falls City Code § 11-2-6(N)(4)
- RequiredSite PlanShowing ADU location, setbacks, and required parking space per Idaho Falls City Code § 11-2-6(N)
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Residential Building Permit Fee — valuation-based (same schedule as new construction/addition) | $30.18 minimum ($1-$499 valuation), scaling per the Residential Building Permit Fee Valuation Table | City of Idaho Falls Fee Schedule (October 2025), item 2.6; no dedicated ADU fee line was found separate from the standard residential valuation table |
Fence Permit
VerifiedA low-cost building permit is required for construction of any new fence in Idaho Falls, primarily to confirm compliance with height and sight-obscuring restrictions near front yards, driveways, intersections, and alleys under Idaho Falls City Code Title 11 (Comprehensive Zoning). Apply through the Cityworks portal or at the Building Division front counter.
Verified 2026-07-03 · Source
Requirements
- A $5.00 fence permit is required for construction of a new fence, per City of Idaho Falls FAQ and Fee Schedule item 2.13.j
- No fence, wall, hedge, or other sight-obscuring structure over 3 feet in height is allowed within 15 feet of a front-yard lot line contiguous to a street, per Idaho Falls City Code § 11-4-8(C)
- A chain-link fence without slats is not considered sight-obscuring under § 11-4-8(C)(2)
- Fences may not violate the clear-view triangle requirements of the Zoning Code at street/driveway/alley intersections
- Swimming pools not completely enclosed within a solid-walled building must be surrounded by a fence at least 5 feet in height with no openings wider than 36 square inches, with self-closing/self-latching gates, per Idaho Falls City Code § 11-4-8(D)
Required documents
- RequiredFence Permit ApplicationSubmitted via Cityworks or in person at the Building Division front counter; City describes the process as taking about ten minutes
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Fence Permit | $5.00 | City of Idaho Falls Fee Schedule (October 2025), item 2.13.j |
Demolition Permit
VerifiedRequired for demolition of any building or structure within Idaho Falls city limits. Idaho Falls City Code Title 7 adopts the 2018 IBC (which includes Chapter 33, Safeguards During Construction, and demolition-related permit provisions under Section 105.1) without a separately published, dedicated demolition-permit checklist or bond ordinance of the kind some other cities publish. Demolition is processed as a standard building permit through the Cityworks portal.
Verified 2026-07-03 · Source
Requirements
- A permit is required before demolishing, removing, or moving a building or structure, per adopted IBC Section 105.1 ("...to construct, enlarge, alter, repair, move, demolish or change the occupancy of a building or structure...shall first make application to the building official and obtain the required permit") as quoted on the City's Apply for a Permit page
- Moving of a residential, commercial, or industrial building from one site to another within city limits, or into the city from outside, requires approval by the Zoning Administrator per Idaho Falls City Code § 11-4-8(E)
- No dedicated City of Idaho Falls demolition bond or site-restoration ordinance (of the kind published by some other cities, e.g., Billings, MT) was located on the City's website as of this review; general safeguards during demolition are governed by the adopted 2018 IBC
Required documents
- RequiredDemolition/Building Permit ApplicationSubmitted online through the Cityworks portal
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Building Permit Fee (valuation-based, same schedule as new construction/alteration) | $30.18 minimum ($1-$499 valuation), scaling per the Residential or Commercial Building Permit Fee Valuation Table depending on project type | City of Idaho Falls Fee Schedule (October 2025), items 2.6-2.7; no dedicated demolition-specific fee line item was found separate from the general building permit valuation tables |
| Permit Issuance Fee | $30.18 | City of Idaho Falls Fee Schedule (October 2025), item 2.13.a |
Electric Vehicle (EV) Charger / EVSE Permit
VerifiedIdaho Falls has no dedicated EV charger/EVSE fee line or standalone permit category — EV charger (Level 2 or DC fast charging equipment) circuit installation is electrical work reviewed under the National Electrical Code as adopted by the City (currently 2023 NEC) and billed under the same Electrical Permit fee schedule used for any other electrical service work. The City of Idaho Falls Fee Schedule (October 2025, items 2.10-2.13) and Electrical page were checked directly for an EV-specific fee line; none was found. Idaho Falls self-administers electrical permits through its own Chief Electrical Inspector (not routed to Idaho DOPL), so the same general Electrical Permit fee and process applies to EV charger installations as to any other electrical work.
Verified 2026-07-20 · Source
Requirements
- Electrical permit required for EV charger/EVSE circuit installation, per IBC/NEC Section 105.1 as adopted by the City
- Governed by the National Electrical Code edition currently adopted by the State of Idaho (2023 NEC per the City's Electrical page), including NEC Article 625 (Electric Vehicle Charging System) provisions
- Electrical contractor must hold Idaho DOPL state electrical licensure; a separate City trade license is not required for electricians
- Apply through the Cityworks online permitting portal
- If the installation increases electrical service demand or requires a panel upgrade, standard service-change documentation applies as for any other electrical service work
Required documents
- RequiredElectrical Permit ApplicationSubmitted online through the Cityworks portal; no EV-specific application form is published separately
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Residential Electrical Permit | $5.85 per each electrical service | No distinct EV charger/EVSE fee line exists; a residential EV charger circuit is billed under the same per-service fee used for other residential electrical work. City of Idaho Falls Fee Schedule (October 2025), item 2.11.a. |
| Commercial Electrical Wiring Permit — first $20,000 of wiring costs | 1.50% of first $20,000 of wiring costs | Applies if the EV charging equipment is installed at a commercial property. City of Idaho Falls Fee Schedule (October 2025), item 2.10.a.i. |
| Permit Issuance Fee | $30.18 | City of Idaho Falls Fee Schedule (October 2025), item 2.13.a. Show full citationHideCity of Idaho Falls Fee Schedule (October 2025), item 2.13.a. Re-verified 2026-07-20 by downloading Resolution No. 2025-18 (adopted August 20, 2025, effective October 1, 2025) directly: item 2.11.a (Residential Electrical Permits, $5.85 per each electrical service), item 2.10.a.i (Commercial Electrical Wiring Permit, first $20,000 of wiring costs, 1.50%), and item 2.13.a ($30.18 Permit Issuance Fee) all match exactly. |
Sources & verification
Verified against official sources. Last reviewed 2026-07-03.
Fee schedules
Applications & forms
Checklists & handouts
Codes & ordinances
Department & other records
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Idaho Falls building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.