This is PermitBase’s published record for Gila Bend as of 2026-07-20. It has since been superseded — see the current record. A historical record reflects what PermitBase had verified at that time; it may not capture a real-world change the jurisdiction had made but PermitBase had not yet verified, and it includes any errors we later corrected. Snapshots are never edited retroactively.
Gila Bend building permits
VerifiedGila Bend, Arizona — as published 2026-07-20.
Verified 2026-07-06 · Source
Codes adopted
Arizona has NO statewide mandatory building code floor for general construction — code adoption is a per-municipality authority under state enabling statutes (A.R.S. Title 9). The Town of Gila Bend adopts and administers its own construction codes through its Community Development Building and Safety Division, which contracts building-safety plan review and inspection services to Willdan Engineering; the Town does not defer permitting to Maricopa County. Source: Town of Gila Bend Code of Ordinances, Chapter 150 (Building Regulations; Construction) and Town of Gila Bend Building and Safety page (gilabendaz.org/279/Building-and-Safety).2006 International Building Code (IBC), copyrighted by the International Code Council, adopted by reference as the "Building Code of the Town of Gila Bend" (Gila Bend Code of Ordinances § 150.15; 1996 Code, § 15.08.010; Ord. 95-010-005; Ord. 01-03; Ord. 08-02). At least three copies are required to be filed with the Town Clerk. No adoption of a later ICC edition (e.g., 2018/2021 IBC) was found in the current codified ordinances as of this review — the 2006 edition remains the codified baseline.2005 National Electrical Code (NEC), copyrighted by the National Fire Protection Association, adopted by reference as the "Electrical Code for the Town of Gila Bend" (§ 150.16; 1996 Code, § 15.12.010; Ord. 95-010-005; Ord. 01-03; Ord. 08-02).2006 International Mechanical Code (IMC), adopted by reference as the "Mechanical Code for the Town of Gila Bend" (§ 150.17; 1996 Code, § 15.16.010; Ord. 95-010-005; Ord. 01-03; Ord. 08-02).2006 International Plumbing Code (IPC), adopted by reference as the "Plumbing Code for the Town of Gila Bend" (§ 150.18; 1996 Code, § 15.20.010; Ord. 95-010-005; Ord. 01-03; Ord. 08-02).2006 International Fire Code (IFC), adopted by reference and codified under the heading "Uniform Code for the Abatement of Dangerous Buildings" as the "Fire Code for the Town of Gila Bend" (§ 150.19; 1996 Code, § 15.24.010; Ord. 95-010-005; Ord. 08-02).2006 International Residential Code (IRC), copyrighted by the International Code Council, adopted by reference as the "Residential Code for the Town of Gila Bend," with a local amendment to IRC Chapter 23 / Section M2301 (Residential Solar Readiness — solar energy systems) (§ 150.20; Ord. 10-12, passed 10-26-2010).Building permit valuations for fee purposes are determined using the most current building valuation data table published by the International Code Council in Building Safety Journal magazine, as republished from time to time; any valuation not specifically covered is classified by the Building Official by nearest-resembling use/construction type (§ 150.03; Ord. 09-02, passed 2-10-2009). The Town's own Fee Schedule (last confirmed amendment 06/07/16, on file as of 5/14/18) also states valuations are calculated per the 2006 IBC square-foot construction cost tables.Buildings must conform to the Town's zoning ordinance in addition to Chapter 150 whenever a building permit is issued and inspected (§ 150.01; 1996 Code, § 15.04.010).The Building Official function (all building, plumbing, electrical, or other inspection matters referenced anywhere in Chapter 150) is vested in the office of the Town Clerk, with Council-authorized deputies as needed (§ 150.02; 1996 Code, § 15.04.020) — in current practice this function is carried out through the Community Development Department's contract with Willdan Engineering.Manufactured homes and factory-built buildings ("on-site permits") are separately regulated: manufactured home permits require 3 plot plans (8.5x11) and zoning clearance; factory-built buildings require 2 complete plan sets bearing approval of the Arizona State Division of Building Codes. Source: Town of Gila Bend Building Plan Check Submittal Checklist (rev. 8.6.16).
Permit types & fees
Residential Building Permit (New Single-Family Residence)
VerifiedRequired for new single-family residence construction in the Town of Gila Bend. Reviewed against the 2006 IRC/IBC as codified in Chapter 150, with plan review and inspections administered by Willdan Engineering under contract to the Town's Community Development Building and Safety Division.
Verified 2026-07-06 · Source
Requirements
- Building permit required for new single-family residence construction within Gila Bend town limits
- Plans must comply with the 2006 IRC/IBC as adopted by the Town (§ 150.15, § 150.20) and the Residential Solar Readiness Ordinance (§ 150.04) requiring later-installation provisions for solar water heating and/or solar electric systems unless a complete solar system is installed at construction
- Completed Project Submittal Form/Building Permit Application (including owner information) and Plan Review Fee required at submittal
- Two (2) complete sets of plans; two (2) extra site plans for Engineering review; structural calcs and truss calcs (if applicable, truss calcs can be deferred); two (2) 8.5x11 plot plans
- Seismic Design Category C applies
Required documents
- RequiredBuilding Permit Application / Project Submittal FormTown of Gila Bend Building Permit Application, submitted to Willdan Engineering/Community Development
- RequiredBuilding Plan Check Submittal Checklist (rev. 8.6.16) — New Single Family Residences sectionTown of Gila Bend Community Development checklist specifying required plan sets, site plans, structural/truss calcs, and plot plans
- RequiredSite/Plot Plan (8.5x11, two sets)Lot dimensions, easements, setbacks, and structure locations for Engineering review
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Building Permit Fee — Based on Valuation | $26.00 (valuation $1-$500); scaling per additional-increment table up to $5,608.75 for the first $1,000,000 + $3.65 per additional $1,000 above that | Town of Gila Bend Fee Schedule (last confirmed-amended 06/07/16, document on file 5/14/18), calculated per 2006 IBC square-foot construction cost valuation tables; Show full citationHideTown of Gila Bend Fee Schedule (last confirmed-amended 06/07/16, document on file 5/14/18), calculated per 2006 IBC square-foot construction cost valuation tables; this is the most current fee schedule publicly available after exhaustive search — no newer resolution/fee-schedule document was found published on the Town's site as of this review |
| Building Plan Review | 65% of Permit Fee (includes 1st and 2nd review) | Town of Gila Bend Fee Schedule; Hourly Plan Review alternative billed at $50/permit, General Plan Review at $65/hour |
Residential Addition / Remodel Permit
VerifiedRequired for room additions and remodels to existing residences in Gila Bend, reviewed against the 2006 IRC as codified in Chapter 150. Patio covers/additions use a dedicated example package showing easement, property-line, and setback requirements.
Verified 2026-07-06 · Source
Requirements
- Building permit required for residential additions, alterations, and remodels
- Completed Project Submittal Form and Plan Review Fee required for additions/alterations; four (4) complete sets of plans; two (2) sets of structural calcs and lighting cut sheets if exterior lighting is modified/added
- Residential Additions: Completed Project Submittal Form, Plan Review Fee, two (2) complete sets of plans, two (2) extra site plans for Engineering review, truss calcs if applicable, two (2) 8.5x11 plot plans
- Residential Remodels: Completed Project Submittal Form, Plan Review Fee, two (2) complete sets of plans
- Patio additions use the Town's Patio Addition Package examples showing easement, property line, and building setback illustrations
Required documents
- RequiredBuilding Permit Application / Project Submittal FormSubmitted to Willdan Engineering/Community Development
- RequiredBuilding Plan Check Submittal Checklist (rev. 8.6.16) — Additions/Alterations, Residential Additions, and Residential Remodels sectionsTown of Gila Bend Community Development checklist
- OptionalPatio Addition 1 Package / Patio Addition 2 PackageTown of Gila Bend example diagrams of easement, property lines, and building setbacks for patio cover submittals
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Building Permit Fee — Based on Valuation | Per the Town's Building Permit Valuation table (same schedule as new construction) | Town of Gila Bend Fee Schedule (last confirmed-amended 06/07/16, on file 5/14/18) |
| Building Plan Review | 65% of Permit Fee (includes 1st and 2nd review) | Town of Gila Bend Fee Schedule |
Electrical Permit
VerifiedRequired for electrical installation, alteration, or repair work in Gila Bend, governed by the 2005 NEC as codified in Chapter 150 (§ 150.16). Covers residential utility clearances, generator transfer-switch installations, and special-inspection electrical work.
Verified 2026-07-06 · Source
Requirements
- Electrical permit required for utility clearances (electric/gas), electrical panel and service work, generator transfer-switch installations, and other hard-wired electrical work
- Governed by the 2005 NEC as adopted by the Town (§ 150.16)
- MEP-only submittals: Completed Project Submittal Form, two (2) complete sets of plans (four (4) sets if exterior lighting is added/modified or roof-mounted A/C units are added)
- Generator permanent/transfer-switch installations require 2 sets of drawings (one-line electrical diagram with load calculations, plus site plan with generator location, fuel type/capacity, property lines, building locations/dimensions); portable generators plugged directly into appliances do not require a permit
- Special Electrical Inspection Certificate required when electrical construction work is placed under a special inspector employed by the owner/owner's agent, per the Town's adopted electrical code — inspection reports filed with the Building Safety Department
Required documents
- RequiredBuilding/Electrical Permit ApplicationSubmitted to Willdan Engineering/Community Development
- OptionalSpecial Electrical Inspection CertificateTown of Gila Bend form for projects using an owner-employed special inspector for electrical construction; requires Architect/Engineer, Owner, and Building Official signatures at issuance and completion stages
- OptionalGenerator Use & Safety drawingsOne-line electrical diagram with load calculations and site plan (generator location, fuel type/capacity, property lines, building dimensions), per Town Generator Use & Safety guidance
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Residential Utility Clearance (Electric or Gas) | $65 | Town of Gila Bend Fee Schedule (last confirmed-amended 06/07/16, on file 5/14/18) |
| Commercial Utility Clearance (Electric or Gas) | $75 | Town of Gila Bend Fee Schedule |
| Temporary Electric Power | $90 | Town of Gila Bend Fee Schedule |
| Electrical Plan Review | 65% of Permit Fee (includes 1st and 2nd review) | Town of Gila Bend Fee Schedule |
| Combination Permit (Plumbing, Electrical, Mechanical) | $150, plus $5.50 per each 1,000 sq ft or fraction thereof | Town of Gila Bend Fee Schedule |
Plumbing Permit
VerifiedRequired for plumbing installation, alteration, or repair work in Gila Bend, governed by the 2006 IPC as codified in Chapter 150 (§ 150.18).
Verified 2026-07-06 · Source
Requirements
- Plumbing permit required for installation, alteration, or repair of plumbing systems, fixtures, and water heaters
- Governed by the 2006 IPC as adopted by the Town (§ 150.18)
- MEP-only submittals: Completed Project Submittal Form, two (2) complete sets of plans
- Water heater installs (electric or gas) are individually fee-itemized on the Town's fee schedule
Required documents
- RequiredBuilding/Plumbing Permit ApplicationSubmitted to Willdan Engineering/Community Development
- RequiredBuilding Plan Check Submittal Checklist (rev. 8.6.16) — MPE Only sectionTown of Gila Bend Community Development checklist for mechanical/plumbing/electrical-only submittals
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Plumbing Plan Review | 65% of Permit Fee (includes 1st and 2nd review) | Town of Gila Bend Fee Schedule (last confirmed-amended 06/07/16, on file 5/14/18) |
| Water Heater Install (Electric) | Flat fee per Town Fee Schedule (line item present; specific current dollar figure not legibly captured in the source document's table formatting for this row — see Water Heater Install (Gas) row and Combination Permit fees as the nearest reliable reference) | Town of Gila Bend Fee Schedule — this row's dollar amount could not be reliably parsed from the source table layout; flagged rather than guessed |
| Combination Permit (Plumbing, Electrical, Mechanical) | $150, plus $5.50 per each 1,000 sq ft or fraction thereof | Town of Gila Bend Fee Schedule |
Mechanical / HVAC Permit
VerifiedRequired for heating, ventilation, and air conditioning installations in Gila Bend, governed by the 2006 IMC as codified in Chapter 150 (§ 150.17).
Verified 2026-07-06 · Source
Requirements
- Mechanical permit required for installation, replacement, or relocation of HVAC equipment and ventilation systems
- Governed by the 2006 IMC as adopted by the Town (§ 150.17)
- MEP-only submittals: Completed Project Submittal Form, two (2) complete sets of plans (four (4) sets if adding roof-mounted A/C units)
- Residential and Commercial A/C unit replacement fees are individually itemized on the Town's fee schedule
Required documents
- RequiredBuilding/Mechanical Permit ApplicationSubmitted to Willdan Engineering/Community Development
- RequiredBuilding Plan Check Submittal Checklist (rev. 8.6.16) — MPE Only sectionTown of Gila Bend Community Development checklist for mechanical/plumbing/electrical-only submittals
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Residential A/C Unit (per unit) | $65 | Town of Gila Bend Fee Schedule (last confirmed-amended 06/07/16, on file 5/14/18) |
| Commercial A/C Unit (per unit) | $175 | Town of Gila Bend Fee Schedule |
| Mechanical Plan Review | $100, plus possibility of additional fees depending on complexity | Town of Gila Bend Fee Schedule |
| Combination Permit (Plumbing, Electrical, Mechanical) | $150, plus $5.50 per each 1,000 sq ft or fraction thereof | Town of Gila Bend Fee Schedule |
Residential Solar Photovoltaic (PV) Permit
VerifiedRooftop or ground-mount residential solar PV installation in Gila Bend is not a separately named permit type — the Town's Building Plan Check Submittal Checklist (rev. 8.6.16) and Fee Schedule (last confirmed-amended 06/07/16) contain no solar/photovoltaic-specific line item, confirmed after reviewing both documents in full. A PV installation is processed as an Electrical Permit (2005 NEC as adopted, § 150.16) for the interconnection/wiring scope, reviewed and inspected under contract by Willdan Engineering, plus a Residential Building Permit (2006 IBC/IRC, valuation-based) if the racking/mounting requires structural roof work. New single-family/duplex construction is separately subject to the Town's Residential Solar Readiness Ordinance (§ 150.04), which requires later-installation provisions (conduit/piping stub-outs, water heater storage space, dedicated 120V circuit) for homes NOT built with a complete solar system at time of construction — this ordinance does not itself create a distinct solar permit or fee for an actual PV installation.
Verified 2026-07-20 · Source
Requirements
- Electrical scope: MEP-only submittal — Completed Project Submittal Form and two (2) complete sets of plans (four (4) sets if roof-mounted equipment such as an inverter/combiner enclosure triggers the roof-mounted-equipment plan-set requirement), reviewed against the 2005 NEC as adopted (§ 150.16)
- Structural/racking scope: Residential Building Permit application if roof penetrations or structural modification are involved, reviewed against the 2006 IBC/IRC (§§ 150.15, 150.20)
- If installed at time of new single-family/duplex construction, the complete solar system satisfies (and supersedes) the Residential Solar Readiness Ordinance's later-installation provisions (§ 150.04) — otherwise those later-installation provisions (conduit/piping stub-outs, 80-gallon water heater storage area, dedicated 120V/15A circuit) apply to the new home regardless of whether solar is installed immediately
- No dedicated solar/PV-specific plan-submittal checklist section (unlike the Checklist's dedicated Pools, Mobile Home, or Patio Addition sections) was found published — confirm current submittal expectations directly with Willdan Engineering, BuildingSafetyAZ@willdan.com, 480-489-2463
Required documents
- RequiredBuilding/Electrical Permit Application / Project Submittal FormSame combined form used for other electrical/MEP-only work; no separate solar-specific version is published. Submitted to Willdan Engineering/Community Development.
- RequiredSite/Plot Plan and Electrical One-Line DiagramNot a Town-published solar-specific form; standard electrical plan-review content inferred from the Town's general MEP-only submittal requirements, since no PV-specific checklist is published
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Electrical Plan Review | 65% of Permit Fee (includes 1st and 2nd review) | Town of Gila Bend Fee Schedule (last confirmed-amended 06/07/16, on file 5/14/18) — same general Electrical Plan Review line applied to solar interconnection work, since no solar-specific line item is published. |
| Combination Permit (Plumbing, Electrical, Mechanical) | $150, plus $5.50 per each 1,000 sq ft or fraction thereof | Town of Gila Bend Fee Schedule — the closest published catch-all mechanism if the PV interconnection is filed alongside other MEP scope rather than as a standalone electrical permit. |
| Building Permit Fee (if structural/racking scope requires a building permit) | Valuation-based per the Town's Building Permit Valuation table — see residential-building-permit entry for bracket amounts | Town of Gila Bend Fee Schedule — applies only if roof penetrations/structural modification trigger a building-permit-level review rather than an electrical-only submittal. |
EV Charger / EVSE Permit
VerifiedRequired for installation of a residential or commercial electric vehicle charging station (EVSE) in Gila Bend, governed by the 2005 NEC as codified in Chapter 150 (§ 150.16). Building safety, plan review, and inspections are administered under contract by Willdan Engineering. The Town's published Fee Schedule (FY2016-2017, on file 5/14/18) has no distinct EV-charger/EVSE line item — a standalone EVSE circuit is billed under the same general valuation-based Building Permit fee table used for other standalone electrical scope, plus the standard Electrical Plan Review fee, or under the flat Temporary Electric Power fee if applicable.
Verified 2026-07-20 · Source
Requirements
- Electrical permit required for a new dedicated EVSE circuit, governed by the 2005 NEC as adopted by the Town (§ 150.16)
- MEP-only submittals: Completed Project Submittal Form, two (2) complete sets of plans
- Special Electrical Inspection Certificate required only if electrical construction work is placed under a special inspector employed by the owner/owner's agent
Required documents
- RequiredBuilding/Electrical Permit ApplicationSubmitted to Willdan Engineering/Community Development. No separate EV-specific application form was found published.
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Building Permit Fee (valuation-based) — standalone EVSE circuit | $26.00 minimum ($1.00 to $500.00 valuation), scaling per the Town's valuation tiers (e.g., $26.00 for the first $500 plus $3.53 per additional $100 up to $2,000) | Town of Gila Bend Fee Schedule (FY2016-2017, on file 5/14/18), Building Permit table. Show full citationHideTown of Gila Bend Fee Schedule (FY2016-2017, on file 5/14/18), Building Permit table. No EV-specific line item is published; a standalone EVSE circuit is billed under this general valuation-based schedule, the same treatment applied to other standalone electrical work not covered by a flat-fee line item. |
| Electrical Plan Review | 65% of Permit Fee (includes 1st and 2nd review) | Town of Gila Bend Fee Schedule. |
| Temporary Electric Power | $90 | Town of Gila Bend Fee Schedule — applies if the installation requires a temporary power connection rather than a permanent EVSE circuit. |
Swimming Pool / Spa Permit
VerifiedRequired for construction of a swimming pool or spa in Gila Bend. Governed by the pool-barrier provisions cross-referenced in the Town's Building Safety FAQ, with separate one-time and standard-plan submittal tracks.
Verified 2026-07-06 · Source
Requirements
- Building permit required for swimming pool/spa construction
- Pool barrier requirement: perimeter fence/barrier at least 5 feet high, self-closing/self-latching gate hardware, and a configuration that prevents a 4-inch sphere from passing through or under the barrier
- Pools (One Time Only, i.e. custom/non-standard plan): Completed Project Submittal Form, Plan Review Fee, two (2) complete sets of plans, two (2) 8.5x11 plot plans
- Pools (Based on Approved Standard, i.e. a standard plan already on file): Completed Project Submittal Form, two (2) 8.5x11 plot plans only — no separate plan review fee/full plan set required since the standard design is pre-approved
Required documents
- RequiredBuilding Permit Application / Project Submittal FormSubmitted to Willdan Engineering/Community Development
- RequiredBuilding Plan Check Submittal Checklist (rev. 8.6.16) — Pools (One Time Only) and Pools (Based on Approved Standard) sectionsTown of Gila Bend Community Development checklist
- RequiredPool, Spa Barrier GuidelinesReferenced in the Town's Building Safety FAQ as the governing pool-fencing standard
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Swimming Pool | $100, plus $100 plan review fee if an approved standard plan is not already on file; otherwise Based on Valuation + Review Fee (65% of permit cost) | Town of Gila Bend Fee Schedule (last confirmed-amended 06/07/16, on file 5/14/18) |
Demolition Permit
VerifiedRequired for demolition of any residential or commercial structure in Gila Bend, or its relocation, under Chapter 150 and Chapter 151 (Moving Buildings) of the Town Code.
Verified 2026-07-06 · Source
Requirements
- Completed Project Submittal Form required for demolition of an entire building
- Two (2) 8.5x11 site plans clearly identifying the building to be demolished
- Pedestrian protection may be required, at the plan reviewer's determination
- Interior-only demolition follows the Tenant Improvement submittal requirements instead
- Building moving/relocation: upon compliance with the moving-building provisions, the Building Official inspects the structure and its foundation, and a moving permit is issued if the inspection, photographs, and plat reveal no ordinance violation (§ 151.03)
Required documents
- RequiredBuilding Permit Application / Project Submittal FormSubmitted to Willdan Engineering/Community Development
- RequiredBuilding Plan Check Submittal Checklist (rev. 8.6.16) — Demolition (Entire Building) sectionTown of Gila Bend Community Development checklist
- RequiredSite Plan (8.5x11, two sets)Clearly identifies the building to be demolished
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Demolition (Residential) | Line item present on Town Fee Schedule; specific current dollar figure not legibly captured in the source document's table formatting for this row | Town of Gila Bend Fee Schedule (last confirmed-amended 06/07/16, on file 5/14/18) — flagged rather than guessed; reconfirm with Willdan Engineering/Community Development |
| Demolition (Commercial) | Line item present on Town Fee Schedule; specific current dollar figure not legibly captured in the source document's table formatting for this row | Town of Gila Bend Fee Schedule — flagged rather than guessed; reconfirm with Willdan Engineering/Community Development |
Fence Permit
VerifiedRequired for fences over 6 feet in height in Gila Bend, and always applicable to swimming pool barrier fencing regardless of the general height exemption.
Verified 2026-07-06 · Source
Requirements
- A building permit is required for any fence that will be over 6 feet in height when finished; fences 6 feet and under do not require a permit
- Swimming pool barrier fences must always meet pool-barrier standards (minimum 5-ft height, self-closing/self-latching gates, 4-inch-sphere test) regardless of the general fence height exemption
- Fee schedule fence line item is captioned 'Fence (over 72in)' — consistent with the 6-foot (72-inch) permit threshold stated in the Building Safety FAQ
Required documents
- RequiredBuilding Permit Application / Project Submittal FormSubmitted to Willdan Engineering/Community Development
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Fence (over 72 in / 6 ft) | $65 (includes gas clearance) | Town of Gila Bend Fee Schedule (last confirmed-amended 06/07/16, on file 5/14/18) |
Manufactured Home / Factory-Built Building Permit
VerifiedRequired for placement of manufactured homes and factory-built buildings (on-site permits) in Gila Bend. Construction/installation standards for these structure types are regulated directly by the State of Arizona; the Town issues the on-site placement permit.
Verified 2026-07-06 · Source
Requirements
- Manufactured Home: Completed Project Submittal Form, three (3) 8.5x11 plot plans, and Zoning Clearance
- Factory Built Buildings (on-site permit): Completed Project Submittal Form and two (2) complete sets of plans bearing the approval of the Arizona State Division of Building Codes
- Grading Only (if site work is needed for placement): Completed Project Submittal Form and two (2) sets of Civil plans showing cut and fill amounts; Building plans must be in for review and Engineering plans must have been through the review process at least once
Required documents
- RequiredBuilding Permit Application / Project Submittal FormSubmitted to Willdan Engineering/Community Development
- RequiredBuilding Plan Check Submittal Checklist (rev. 8.6.16) — Mobile Home and Factory Built Buildings sectionsTown of Gila Bend Community Development checklist
- RequiredZoning ClearanceRequired for manufactured home placement
Fee schedule
| Fee type | Amount | Notes |
|---|---|---|
| Manufactured Home | $225 (includes 2 inspections); $459 (includes 3 inspections) | Town of Gila Bend Fee Schedule (last confirmed-amended 06/07/16, on file 5/14/18) |
| Factory-Built Building — Residential | $450 per story (includes 3 inspections) | Town of Gila Bend Fee Schedule |
| Factory-Built Building — Commercial or Classroom | $4.50 per linear foot, per story | Town of Gila Bend Fee Schedule |
| Grading and Drainage | $145 (under 100,000 cubic yards); $622 (100,000 cubic yards or more) | Town of Gila Bend Fee Schedule |
Sources & verification
Verified against official sources. Last reviewed 2026-07-06.
Fee schedules
Applications & forms
Checklists & handouts
Codes & ordinances
Department & other records
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Gila Bend building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.