Do I Need a Permit for a Hot Tub in Utah?
Quick Answer
Yes — at minimum an electrical permit for the 240V circuit.
Electrical Permit Is Always Required
Hot tubs require a dedicated 240V/50A circuit with GFCI protection and a disconnect switch within sight of the tub (but at least 5 feet from the water). This always requires an electrical permit and inspection — there's no exception for portable/plug-in hot tubs at this voltage.
Structural Considerations
A filled hot tub with occupants can weigh 3,000-6,000 pounds. If placing on a deck, verify the deck can handle the load — this may require a structural assessment or building permit for deck reinforcement. A concrete pad on grade is the simplest solution.
Barrier Requirements
Some Utah cities require barriers (fencing) around hot tubs, similar to swimming pools. A lockable hard cover with clips may satisfy this requirement in some jurisdictions. Check with your city — rules vary.
120V Plug-In Hot Tubs
Smaller 120V plug-in hot tubs that use a standard outlet do not require an electrical permit. However, the outlet must still be GFCI-protected. If you're installing a new outdoor GFCI outlet for the hot tub, that outlet installation does require an electrical permit.
Bottom Line
Any 240V hot tub needs an electrical permit ($40-$75). Check if your city also requires a barrier or building permit for the support structure.