Skip to main content
PermitBase

Manufactured / Modular Home Setting & Moving Permit in Unincorporated Bingham County, Idaho

Required to place a new or used manufactured/modular home, or to move an existing residence, in unincorporated Bingham County. Governed by Bingham County Code 8-1-8 (Installation of Manufactured Homes). Requires the home's HUD data plate, HUD tag, and title/certificate of origin; homes manufactured before June 15, 1976 require the State of Idaho Rehab Program.

Verified 2026-07-08 · Source

When you need this permit

  • Current recorded deed
  • Site plan with approach, measurements to all property lines and existing structures
  • Septic Permit or Will-Serve Letter
  • Footing/Foundation Plan or Block Setting Plan (FEMA-approved permanent foundation required if in a floodplain)
  • Detailed/labeled floor layout
  • Snow Load Verification — must show 30 psf roof load; engineered documentation required if unavailable
  • Data Plate (usually posted under the kitchen sink; obtainable from the Institute for Building Technology and Safety (IBTS) at 703-481-2010 / ibts.org if missing)
  • HUD tag (red tag on exterior; one per section for a double-wide)
  • Title or Certificate of Origin; homes manufactured before June 15, 1976 require the State of Idaho Rehab Program

Required documents

Check off what you have — your progress is saved on this device.

Not ready yet — 0 of 3 required documents checked.

This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29 →

Fee schedule

Manufactured Home Setting Permit — Single wideFee Schedule Resolution 2026-17
$150.00
Manufactured Home Setting Permit — Double wideFee Schedule Resolution 2026-17
$200.00
Manufactured Home Setting Permit — Triple wideFee Schedule Resolution 2026-17
$250.00
Move Residence (does not include Setting Fee)Fee Schedule Resolution 2026-17
$250.00 + square footage of foundation (per Residential Building Permit Valuation Table)
Declaration of Real Property for Manufactured Home (if on-site inspection required)Fee Schedule Resolution 2026-17
$100.00

Review timeline

Plan review
Not published — contact the department

How long did your Manufactured / Modular Home Setting & Moving Permit permit actually take in Unincorporated Bingham County?

Anonymous — one question, no email. Answers are combined and only shown once at least 5 people have reported.

Inspection process

  1. 1

    Foundation / Block Setting

    Verifies footing/foundation or block setting plan compliance, including FEMA-approved permanent foundation if in a floodplain

  2. 2

    Final

    Confirms HUD tag, data plate, and completed setting; Certificate of Occupancy/Completion issued

See the full Unincorporated Bingham County inspection guide — scheduling & re-inspection fees →

Tips

  • If the home's Data Plate (usually under the kitchen sink) is missing, a replacement can be obtained from the Institute for Building Technology and Safety (IBTS) at 703-481-2010 or ibts.org.
  • Homes manufactured before June 15, 1976 cannot be permitted without enrollment in the State of Idaho Rehab Program.
  • Snow load must be verified at 30 psf roof load minimum; if no documentation exists for the home, engineered verification is required.

Frequently asked questions

Unincorporated Bingham County requires a manufactured / modular home setting & moving permit for: Current recorded deed; Site plan with approach, measurements to all property lines and existing structures; Septic Permit or Will-Serve Letter; Footing/Foundation Plan or Block Setting Plan (FEMA-approved permanent foundation required if in a floodplain); Detailed/labeled floor layout; Snow Load Verification — must show 30 psf roof load; engineered documentation required if unavailable; Data Plate (usually posted under the kitchen sink; obtainable from the Institute for Building Technology and Safety (IBTS) at 703-481-2010 / ibts.org if missing); HUD tag (red tag on exterior; one per section for a double-wide); Title or Certificate of Origin; homes manufactured before June 15, 1976 require the State of Idaho Rehab Program. If your project isn't listed, confirm with Bingham County Planning & Development — Building Division at 208-782-3177 before starting work.

The Manufactured Home Setting Permit fee is $150 for a single-wide, $200 for a double-wide, and $250 for a triple-wide, plus the $25 technology fee applied to all permits. Moving an existing residence is a separate $250 fee plus foundation square footage valuation, and does not include the setting fee. Source: Bingham County Fee Schedule Resolution 2026-17.

Unincorporated Bingham County does not publish a plan-review timeline for this permit. Contact Bingham County Planning & Development — Building Division at 208-782-3177 for current turnaround.

You'll need: ViewPointCloud Manufactured Home Building & Moving Permit Application; HUD Data Plate and HUD Tag documentation; Title/Certificate of Origin. See the required-documents checklist on this page for details on each.

Unincorporated Bingham County requires 2 inspection(s) for a manufactured / modular home setting & moving permit, in order: Foundation / Block Setting, Final. Schedule each through Bingham County Planning & Development — Building Division (208-782-3177).

Apply through Bingham County Planning & Development — Building Division at 490 N Maple, Suite A, Blackfoot, ID 83221. Phone: 208-782-3177, email: buildingpermits@binghamid.gov. Office hours: Mon–Fri 8:00 AM – 5:00 PM (closed state & federal holidays). Official information: https://www.binghamid.gov/Building-Construction.

Unincorporated Bingham County, Idaho has adopted: 2018 International Building Code (IBC) with Bingham County Amendments — Bingham County Code 8-1-1; 2018 International Building Code with State Amendments (IDAPA 24.39.30) — Bingham County Code 8-1-1A; 2018 International Residential Code (IRC) with Bingham County Amendments — Bingham County Code 8-1-2; 2018 International Residential Code with State Amendments (IDAPA 24.30.39) — Bingham County Code 8-1-2A; 2018 International Energy Conservation Code (IECC) with State Amendments (IDAPA 24.39.30) — Bingham County Code 8-1-3; 2018 International Energy Conservation Code with Bingham County Amendment — Bingham County Code 8-1-3A; 2018 International Existing Building Code (IEBC), no amendments — Bingham County Code 8-1-4; International Mechanical Code (IMC) with State Amendments — Bingham County Code 8-1-5; 2018 International Fuel Gas Code (IFGC) with State Amendments — Bingham County Code 8-1-6; IRC Part V (Mechanical) and Part VI (Fuel Gas) for one- and two-family dwellings — Bingham County Code 8-1-7; Manufactured home installation standards — Bingham County Code 8-1-8. Local amendments apply — see the Unincorporated Bingham County overview page for the full list.

Sources & verification

Verified against official sources. Last reviewed 2026-07-08.

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Unincorporated Bingham County building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.

Other permits in Unincorporated Bingham County

Residential Building Permit (New Construction / Addition / Remodel)Residential Accessory Structure Permit (Shop, Pole Barn, Garage, Shed)Mechanical / HVAC Permit (Residential and Commercial)Solar Photovoltaic (PV) PermitEV Charger / EVSE Electrical Permit

Manufactured / Modular Home Setting & Moving Permit in other cities

Buhl, IdahoCascade, IdahoGarden City, IdahoRupert, IdahoStar, IdahoUnincorporated Canyon County, IdahoUnincorporated Elmore County, IdahoUnincorporated Madison County, Idaho

Compare manufactured / modular home setting & moving permit fees across Idaho →

Look up this fee in a different city →

Embed this data card →

Now live

Build your Unincorporated Bingham County project checklist

Describe your project once and get every permit, document, and fee it triggers in Unincorporated Bingham County — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.

Get started →