Electrical Wiring Permit (State Program — informational) in Unincorporated Albany County, Wyoming

Albany County has not been granted delegated electrical-enforcement authority, so electrical wiring permits and inspections in unincorporated Albany County are issued by the Wyoming State Fire Marshal's Office — Dept. of Fire Prevention & Electrical Safety (Chief Electrical Inspector) under W.S. § 35-9-119. As of 2026-07-17, the WSFM electrical-safety page states the 2026 edition of the National Electrical Code became effective statewide on July 1, 2026 (superseding the prior 2023 NEC default cited here through 2026-07-01). This is not a county-issued permit; it is included here so applicants know who to contact.

Reviewed 2026-07-01 · Source

When you need this permit

Apply through the state electrical program's online portal (wyelectrician.imagetrendlicense.com) rather than through Albany County

Required documents

Check off what you have — your progress is saved on this device.

Fee schedule

Standard wiring permit

Wyoming State Fire Marshal electrical program; Show full citation

Wyoming State Fire Marshal electrical program; temporary/90-day permit is $40. Permit fee is waived if an inspection is requested and paid for. Caution: the cited wsfm.wyo.gov/electrical-safety page currently contains no fee table at all (nor does its embedded 'State of Wyoming Adopted Codes' document), and the linked wyelectrician.imagetrendlicense.com portal is login-gated with no public fee page — so these figures cannot currently be re-grounded against a live public source. They are retained pending a source that republishes them; treat them as historical rather than freshly confirmed.

$50.00

Residential inspection (100A service)

W.S. § 35-9-120(c)(i)(A) sets the maximum residential inspection fee at $20.00 plus $0.50 per ampere, which is $70.00 at 100A. Show full citation

W.S. § 35-9-120(c)(i)(A) sets the maximum residential inspection fee at $20.00 plus $0.50 per ampere, which is $70.00 at 100A. The statute makes this a ceiling, not a published charge — the operative fee is “established by the department by rule” and the State Fire Marshal does not publish that schedule. The separate $50.00 wiring permit fee is waived for anyone requesting and paying for an inspection, so it is not additive to this figure.

$70.00

Residential inspection (125A service)

W.S. § 35-9-120(c)(i)(A) sets the maximum residential inspection fee at $20.00 plus $0.50 per ampere, which is $82.50 at 125A. Show full citation

W.S. § 35-9-120(c)(i)(A) sets the maximum residential inspection fee at $20.00 plus $0.50 per ampere, which is $82.50 at 125A. The statute makes this a ceiling, not a published charge — the operative fee is “established by the department by rule” and the State Fire Marshal does not publish that schedule. The separate $50.00 wiring permit fee is waived for anyone requesting and paying for an inspection, so it is not additive to this figure.

$82.50

Residential inspection (150A service)

W.S. § 35-9-120(c)(i)(A) sets the maximum residential inspection fee at $20.00 plus $0.50 per ampere, which is $95.00 at 150A. Show full citation

W.S. § 35-9-120(c)(i)(A) sets the maximum residential inspection fee at $20.00 plus $0.50 per ampere, which is $95.00 at 150A. The statute makes this a ceiling, not a published charge — the operative fee is “established by the department by rule” and the State Fire Marshal does not publish that schedule. The separate $50.00 wiring permit fee is waived for anyone requesting and paying for an inspection, so it is not additive to this figure.

$95.00

Residential inspection (200A service)

W.S. § 35-9-120(c)(i)(A) sets the maximum residential inspection fee at $20.00 plus $0.50 per ampere, which is $120.00 at 200A. Show full citation

W.S. § 35-9-120(c)(i)(A) sets the maximum residential inspection fee at $20.00 plus $0.50 per ampere, which is $120.00 at 200A. The statute makes this a ceiling, not a published charge — the operative fee is “established by the department by rule” and the State Fire Marshal does not publish that schedule. The separate $50.00 wiring permit fee is waived for anyone requesting and paying for an inspection, so it is not additive to this figure.

$120.00

Residential inspection (300A service)

W.S. § 35-9-120(c)(i)(A) sets the maximum residential inspection fee at $20.00 plus $0.50 per ampere, which is $170.00 at 300A. Show full citation

W.S. § 35-9-120(c)(i)(A) sets the maximum residential inspection fee at $20.00 plus $0.50 per ampere, which is $170.00 at 300A. The statute makes this a ceiling, not a published charge — the operative fee is “established by the department by rule” and the State Fire Marshal does not publish that schedule. The separate $50.00 wiring permit fee is waived for anyone requesting and paying for an inspection, so it is not additive to this figure.

$170.00

Residential inspection (400A service)

W.S. § 35-9-120(c)(i)(A) sets the maximum residential inspection fee at $20.00 plus $0.50 per ampere, which is $220.00 at 400A. Show full citation

W.S. § 35-9-120(c)(i)(A) sets the maximum residential inspection fee at $20.00 plus $0.50 per ampere, which is $220.00 at 400A. The statute makes this a ceiling, not a published charge — the operative fee is “established by the department by rule” and the State Fire Marshal does not publish that schedule. The separate $50.00 wiring permit fee is waived for anyone requesting and paying for an inspection, so it is not additive to this figure.

$220.00

Review timeline

Plan reviewTypical estimate — confirm current times with the Unincorporated Albany County building department

~5–20 business days

Inspection process

See the full Unincorporated Albany County inspection guide — scheduling & re-inspection fees →

Tips

This is a STATE program, not an Albany County permit — do not contact the county Planning Department for electrical inspections.
The nearest WSFM regional inspector office to Albany County is Laramie itself; confirm current inspector contact via the WSFM Electrical Safety page.

Frequently asked questions

Unincorporated Albany County requires an electrical wiring permit (state program — informational) for: Apply through the state electrical program's online portal (wyelectrician.imagetrendlicense.com) rather than through Albany County. If your project isn't listed, confirm with Albany County Planning Department at (307) 721-2568 before starting work.

In Unincorporated Albany County, the published Standard wiring permit is: $50.00. Additional published fees: Residential inspection (100A service) — $70.00; Residential inspection (125A service) — $82.50; Residential inspection (150A service) — $95.00; Residential inspection (200A service) — $120.00; Residential inspection (300A service) — $170.00; Residential inspection (400A service) — $220.00. These are the jurisdiction's own published figures — see the fee schedule table and source citations on this page.

Plan review for an electrical wiring permit (state program — informational) in Unincorporated Albany County typically runs 5–20 business days. This is an estimate, not a published figure — confirm current review times with Albany County Planning Department at (307) 721-2568.

Apply through Albany County Planning Department at 1002 S 3rd Street, Laramie, WY 82070. Phone: (307) 721-2568, email: planning@albanycountywy.gov. Office hours: Monday–Thursday, 7:30am–5:00pm (business by phone, email, and mail also available; staff may be unavailable during posted hours, call ahead to guarantee availability — per albanycountywy.gov/253/Planning). Official information: https://www.albanycountywy.gov/253/Planning.

Unincorporated Albany County, Wyoming has adopted: Albany County has NOT adopted a countywide building code and does NOT issue a general IBC/IRC-style building permit for private construction in unincorporated areas. Under Wyoming's local-option delegation statute (W.S. § 35-9-121), county-level building-code enforcement authority is opt-in via application to the State Fire Marshal; Albany County has not taken that authority, so the State Fire Marshal's Office retains BOTH building and electrical jurisdiction countywide (WSFM 'Local and State Jurisdictions' chart, header reads 'UPDATED 7/7/2026' — corrected 2026-07-17 from a stale '5/11/2026' citation, embedded at https://wsfm.wyo.gov/electrical-safety, lists Albany County BLDG INSP/PR = S and ELEC INSP/PR = S).; The county's OWN site confirms this: Albany County Planning's permit menu and Land Use Permit Fee Schedule (https://www.albanycountywy.gov/253/Planning; fee schedule PDF https://www.albanycountywy.gov/DocumentCenter/View/6249/Fee-Schedule) contain NO International Building Code / International Residential Code adoption and NO 'building permit' fee line — only zoning, floodplain, wastewater, subdivision, sign, tower, and wind/solar fees. The county's own application labels its zoning approval for new residential/commercial structures 'Zoning Certificate & Rural Address (Building Permit)' — i.e., the county's stand-in for a building permit is a ZONING review against the Albany County Zoning Resolution, not a state building-code plan review/inspection.; The Albany County Zoning Certificate application (https://www.albanycountywy.gov/DocumentCenter/View/4521/Zoning-Certificate-Application) confirms review is 'by the Planning Department' for compliance with 'the Albany County Zoning Resolution' — land-use/setback/use compliance, not IBC/IRC structural or life-safety code compliance.; Practical takeaway: if you are building in unincorporated Albany County, you generally do NOT need a county building permit for the construction itself, but you DO need the county's Zoning Certificate (a land-use/placement approval, sometimes informally called the 'building permit' by the county) plus any of the real exceptions below that apply to your project (floodplain, septic/small wastewater, driveway access, state electrical).. Local amendments apply — see the Unincorporated Albany County overview page for the full list.

Sources & verification

Key facts verified against official sources. Last reviewed 2026-07-01.

Albany County Planning Department — official building department

Fee schedules

Wyoming Statutes § 35-9-120 — electrical inspection and wiring permit fees

Department & other records

Wyoming State Fire Marshal — Electrical Safety (Local and State Jurisdictions chart)

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Unincorporated Albany County building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.

Unincorporated Albany County's permit history isn't searchable here yet

This page covers what the permit requires. What we don't have for Unincorporated Albany County yet is the record of permits actually issued — the history you'd search by street address. That is a gap in our coverage, not a statement about any particular property.

Your email, and the place — never an address. We only use it to tell you when Unincorporated Albany County lands. Privacy.

Other permits in Unincorporated Albany County

Zoning Certificate & Rural Address (county's "Building Permit" stand-in)Commercial/Industrial Zoning Certificate (county's commercial "Building Permit" stand-in)Floodplain Development Permit Small Wastewater Treatment Facility Permit (Septic)Driveway / Road Access (Approach License)Solar Energy Permit Electric Vehicle (EV) Charger Permit (State Program)Sign Permit (Outdoor Sign)Fire Alarm & Fire Sprinkler System Plan Review (State Program)Structure Change of Use (via Zoning Certificate)

Compare electrical wiring permit (state program — informational) fees across Wyoming →

Look up this fee in a different city →

Embed this data card →

Now live

Build your Unincorporated Albany County project checklist

Describe your project once and get every permit, document, and fee it triggers in Unincorporated Albany County — in one checklist. Free, for any city and any number of projects.

Get started →