Sign / Fence Permit — Pima, Arizona · Requirements sheet
Verified 2026-07-23 · Source: https://pimaaz23.portal.iworq.net/portalhome/pimaaz23
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
Sign / Fence Permit in Pima, Arizona
Required for installation of signs or fences within Town of Pima limits. Applications are submitted through the Town's iWorq Citizen Portal under a dedicated Sign/Fence application category. The Town's own live Town Code (Section 12-3-2.B.7/B.8, AR Zone) publishes specific fence-height and small home-occupation-sign standards, and the Town's live Schedule of Fees and Charges publishes specific fees for both.
Verified 2026-07-23 · Source
When you need this permit
- Permit required for sign or fence installation within Town of Pima limits
- Submitted via the Town of Pima iWorq Citizen Portal under the Sign/Fence application link
- GAP PARTIALLY CLOSED 2026-07-23: Town Code Section 12-3-2.B.7 (AR — Agricultural Residential Zone, the Town's primary zoning district) publishes fence/wall/hedge height standards: front (nearest street-facing) may be 3 ft sight-obscuring or 4 ft non-sight-obscuring; rear up to but not exceeding 6 ft; sides up to but not exceeding 6 ft, except the front 20 ft of a side fence must be 3 ft sight-obscuring or 4 ft non-sight-obscuring; corner lots or lots bordering alleys must have a minimum 20 ft of 3 ft sight-obscuring/4 ft non-sight-obscuring fencing (an exception allows a 45-degree cut corner at 20 ft back, same height/material as the rest of the wall). These are the only fence standards located; they are specific to the AR Zone and may differ in the Town's other zones (MH/MF, CC, IN) — confirm zone-specific rules with Planning & Zoning before installation.
- Town Code Section 12-3-2.B.8 (AR Zone) separately permits small signs (home-occupation or residential-property-for-sale signs) up to 8 sq ft, set back a minimum of 10 ft from public streets, without further specifying standards for other sign types/zones — for larger or commercial signage, confirm applicable standards with Planning & Zoning.
Required documents
Check off what you have — your progress is saved on this device.
Not ready yet — 0 of 1 required documents checked.
This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29 →
Fee schedule
Review timeline
Inspection process
- 1
Final
Final inspection verifying sign/fence placement and construction per approved application
See the full Pima inspection guide — scheduling & re-inspection fees →
Tips
- Sign and fence permits are combined into a single application category on the Town's iWorq portal, distinct from the general Building/Addition/Remodel category.
- Fence height/setback standards found in Section 12-3-2.B.7 of the Town Code apply to the AR (Agricultural Residential) Zone, the Town's primary zoning district; confirm with Planning & Zoning if your lot is in the MH/MF, CC, or IN zone instead.
- The Fence Permit is the ONLY permit type in the Town's fee schedule exempted from the $100.00 flat Administrative Fee that is otherwise added to nearly every other permit type, including Sign permits.
Frequently asked questions
Sources & verification
Verified against official sources. Last reviewed 2026-07-23.
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Pima building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Other permits in Pima
Compare sign / fence permit fees across Arizona →
Look up this fee in a different city →
Now live
Build your Pima project checklist
Describe your project once and get every permit, document, and fee it triggers in Pima — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.
Get started →