Kaysville building inspections

Applies to: Demolition Permit

1. 1

   Power Meter Disconnect

   Kaysville City Power meter disconnect, scheduled after permit is paid

2. 2

   Water Meter Disconnect

   Kaysville City Water meter disconnect, scheduled after permit is paid

3. 3

   Sewer Cap

   Sewer line capped per code

4. 4

   Final

   Site cleared, backfilled if foundation/basement removed, erosion/water-accumulation control in place

5. 5

   Bond Release

   Performance deposit ($200) released after passing Final inspection

Applies to: Basement Finish Permit

1. 1

   Framing

   Wall framing, fire blocking, egress window openings

2. 2

   MEP Rough-In (4-way)

   Electrical, plumbing, and HVAC rough-ins before walls closed

3. 3

   Insulation

   Insulation on exterior walls, vapor barrier placement

4. 4

   Final

   Drywall, fixtures, smoke/CO detectors, and all finishes complete

Applies to: Electrical Permit / Service Upgrade

1. 1

   Rough-In

   After wiring installed, before walls closed — verify box placement, wire sizing, proper support

2. 2

   Service / Panel

   Panel installation, grounding electrode system, service entrance conductors

3. 3

   Power Meter

   Kaysville City Power meter set/connection, scheduled after permit is paid

4. 4

   Final

   All devices installed, GFCI/AFCI protection verified, panel labeled

Applies to: EV Charger / EVSE Permit

1. 1

   Rough-In

   After wiring installed, before walls closed — verify box placement, wire sizing, proper support

2. 2

   Service / Panel

   Panel installation, grounding electrode system, service entrance conductors, if the charger requires a service upgrade

3. 3

   Power Meter

   Kaysville City Power meter set/connection, scheduled after permit is paid

4. 4

   Final

   Charger connection, GFCI/breaker protection, and panel labeling verified complete

Applies to: Residential Building Permit

1. 1

   Foundation / Footing

   Before concrete pour — verify excavation, forms, rebar, and anchor bolts

2. 2

   Framing

   After framing, sheathing, and rough-in MEP — before insulation or wall cover

3. 3

   Insulation

   After insulation installed, before drywall

4. 4

   Final

   All work complete — certificate of occupancy issued upon passing

Applies to: Accessory Building / Addition / Carport Permit

1. 1

   Footings

   Footing depth and forms before concrete pour

2. 2

   Framing

   Structure framing and any MEP rough-in

3. 3

   Final

   Completed structure, setback compliance verified

Applies to: Commercial Tenant Improvement / Tenant Finish Permit

1. 1

   Framing / Structural (if applicable)

   Interior wall framing and structural connections verified before close-in, where the scope includes structural work.

2. 2

   MEP Rough-In

   Electrical, plumbing, and mechanical rough-in for the tenant space, inspected before walls closed.

3. 3

   Final

   All tenant-finish or remodel work complete before occupancy.

Applies to: Residential Pool Permit

1. 1

   Pre-Gunite / Bonding

   Steel, plumbing, and electrical bonding before shotcrete/gunite or liner installation

2. 2

   Barrier / Fence

   Pool barrier compliance verified before water can be introduced

3. 3

   Final

   Equipment, bonding, and barrier complete

Applies to: Change of Use / Change of Occupancy

1. 1

   Fire Department Business Inspection (if no construction)

   Required before a new commercial business license is issued for a space, per Kaysville's published business-licensing guidance; billed as the $100 Business Inspection fee newly adopted in the FY2027 Consolidated Fee Schedule.

2. 2

   Building Permit inspections (if construction accompanies the change of use)

   See the Commercial Building Permit / Commercial Tenant Improvement Permit inspection sequences.

Applies to: Roofing Permit

1. 1

   Dry-In

   After tear-off and underlayment/ice barrier installed, before final roofing material applied

2. 2

   Final

   Completed roof — verify ice barrier, flashing, and nailing per manufacturer instructions

Applies to: Solar Panel Permit

1. 1

   Rough Electrical

   Conduit runs, wire sizing, disconnect placement before energizing

2. 2

   Final / Structural

   Panel mounting, racking attachment, roof penetration sealing, and electrical connections verified

Final inspection only: Internal Accessory Dwelling Unit (IADU), Mechanical / HVAC / Water Heater Permit