Plumbing Permit — Ogden, Utah · Requirements sheet
Verified 2026-06-30 · Source: https://www.ogdencity.gov/192/Permit-Requirements
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
Plumbing Permit in Ogden, Utah
Required for plumbing installations, alterations, and repairs in Ogden including water heaters, fixture additions, and gas line work. Governed by the 2024 IPC as adopted by Utah Code § 15A-2-103, effective July 1, 2026 (superseded the 2021 edition).
Verified 2026-06-30 · Source
When you need this permit
- New plumbing fixture installations (sinks, toilets, showers)
- Water heater installation or replacement (including like-for-like — explicitly required by permit)
- Water line or sewer line replacement or extension
- Gas line installation or modification
- Backflow prevention device installation
- Altering, changing, extending, installing, repairing, or replacing any plumbing system
Required documents
Check off what you have — your progress is saved on this device.
Not ready yet — 0 of 1 required documents checked.
This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29 →
Fee schedule
Review timeline
Inspection process
- 1
Underground / Slab
Before concrete pour — verify pipe slope, materials, and cleanouts
- 2
Rough-In
After pipes installed, before walls closed — pressure test required
- 3
Final
All fixtures connected, water flowing, no leaks, proper venting verified
See the full Ogden inspection guide — scheduling & re-inspection fees →
Tips
- Ogden's Permit Requirements page explicitly states a permit is required to replace a water heater.
- Ogden follows the 2024 IPC, effective July 1, 2026 (superseded the 2021 edition).
- Homeowners may pull plumbing permits for owner-occupied residences. Commercial and residential rental work requires a Utah-licensed contractor. Owner-builderContractor
- Seismic strapping is required for water heaters in Utah — two straps at upper third and lower third of the tank.
Frequently asked questions
Sources & verification
Verified against official sources. Last reviewed 2026-06-30.
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Ogden building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Other permits in Ogden
Plumbing Permit in other cities
Compare plumbing permit fees across Utah →
Look up this fee in a different city →
Related guides
Now live
Build your Ogden project checklist
Describe your project once and get every permit, document, and fee it triggers in Ogden — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.
Get started →