Skip to main content
PermitBase

Mechanical / HVAC Permit in Ogden, Utah

Required for HVAC installations, replacements, and ductwork modifications in Ogden. Ogden's Permit Requirements page explicitly states a permit is required to replace a furnace. Governed by the 2024 IMC, effective July 1, 2026 (superseded the 2021 edition).

Verified 2026-06-30 · Source

When you need this permit

  • Furnace or boiler installation or replacement (explicitly required by permit requirements page)
  • Air conditioning system installation or replacement
  • Ductwork installation or major modification
  • Evaporative cooler installation
  • Fireplace or wood-burning stove installation
  • Altering, changing, extending, installing, repairing, or replacing any mechanical/gas system

Required documents

Check off what you have — your progress is saved on this device.

Not ready yet0 of 1 required documents checked.

This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29

Fee schedule

Mechanical Permit FeeOgden City Code § 4-6-1.A.9.a: building permit fees apply to 'building, plumbing, electrical, mechanical, demolitions, etc.'
Valuation-based per Technical Code Base Fee Schedule — same table as residential building permit (minimum $70.50 for work valued at $1,200 or less)
Plan Review FeeOgden City Code § 4-6-1.A.9.c
65% of the Technical Code Base Fee Schedule, or actual cost if less
Additional InspectionsOgden City Code § 4-6-1.A.9.b
$47.00 per hour

Review timeline

Plan reviewOgden’s published plan-review target
10–15 business days

How long did your Mechanical / HVAC Permit permit actually take in Ogden?

Anonymous — one question, no email. Answers are combined and only shown once at least 5 people have reported.

Inspection process

  1. 1

    Rough-In

    Ductwork and gas piping installed, before walls closed — verify clearances and support

  2. 2

    Final

    Equipment operational, combustion air verified, gas pressure tested, thermostat functional

See the full Ogden inspection guide — scheduling & re-inspection fees →

Tips

  • Ogden's Permit Requirements page explicitly states a permit is required to replace a furnace.
  • Ogden follows the 2024 IMC, effective July 1, 2026 (superseded the 2021 edition).
  • High-efficiency furnaces require condensate drain lines — plan routing before installation.
  • Gas line work may require a separate plumbing/gas permit in addition to the mechanical permit for the appliance.

Frequently asked questions

Yes. Ogden City's Permit Requirements page explicitly states a permit is required to replace a furnace. The fee is valuation-based per Ogden City Code § 4-6-1.A.9 (minimum $70.50).

Mechanical permit fees in Ogden are valuation-based using the Technical Code Base Fee Schedule (Ogden City Code § 4-6-1.A.9): $70.50 minimum for work valued at $1,200 or less. Plan review is 65% of the permit fee.

Ogden's published plan-review target for a mechanical / hvac permit is 10–15 business days.

You'll need: Permit Application. Depending on your project, Ogden may also ask for: Equipment Specifications; Mechanical Plan. See the required-documents checklist on this page for details on each.

Ogden requires 2 inspection(s) for a mechanical / hvac permit, in order: Rough-In, Final. Schedule each through Ogden City Building Permits & Inspections ((801) 629-8950).

Apply through Ogden City Building Permits & Inspections at 2549 Washington Boulevard, Suite 240, Ogden, UT 84401. Phone: (801) 629-8950, email: permits.insp@ogdencity.gov. Office hours: Mon–Fri 8:00 AM – 5:00 PM (excluding holidays). Official information: https://www.ogdencity.gov/183/Building-Permits-Inspections.

Ogden, Utah has adopted: 2024 International Building Code (IBC), including Appendices C and J — currently in effect as of July 1, 2026, superseding the 2021 IBC that was in effect through June 30, 2026 (Utah Code § 15A-2-103(1)(a)); 2021 International Residential Code (IRC) — currently in effect; unchanged by the July 1, 2026 statewide code-edition update (Utah Code § 15A-2-103(1)(b)); 2024 International Plumbing Code (IPC) — currently in effect as of July 1, 2026, superseding the 2021 IPC that was in effect through June 30, 2026 (Utah Code § 15A-2-103(1)(d)); 2024 International Mechanical Code (IMC) — currently in effect as of July 1, 2026, superseding the 2021 IMC that was in effect through June 30, 2026 (Utah Code § 15A-2-103(1)(e)); 2024 International Fuel Gas Code (IFGC) — currently in effect as of July 1, 2026, superseding the 2021 IFGC that was in effect through June 30, 2026 (Utah Code § 15A-2-103(1)(f)); 2023 National Electrical Code (NEC) — currently in effect; unchanged by the July 1, 2026 statewide code-edition update (Utah Code § 15A-2-103(1)(g)); 2024 International Energy Conservation Code (IECC) — currently in effect as of July 1, 2026, superseding the 2021 IECC that was in effect through June 30, 2026 (Utah Code § 15A-2-103(1)(h)); 2024 International Existing Building Code (IEBC) — currently in effect as of July 1, 2026, superseding the 2021 IEBC that was in effect through June 30, 2026 (Utah Code § 15A-2-103(1)(i)); Residential provisions of the 2024 International Swimming Pool and Spa Code (ISPSC) — currently in effect as of July 1, 2026, superseding the 2021 ISPSC that was in effect through June 30, 2026 (Utah Code § 15A-2-103(1)(n)); NOTE (updated 2026-07-16): the July 1, 2026 transition forecast in the prior version of this entry has now occurred — confirmed live against Utah Code § 15A-2-103, current version (effective 7/1/2026, superseded 1/1/2027), read at le.utah.gov/xcode/Title15A/Chapter2/15A-2-S103.html. This file cites no Ogden-specific code-adoption webpage; all codesAdopted entries above are sourced directly from the statute.. Local amendments apply — see the Ogden overview page for the full list.

Sources & verification

Verified against official sources. Last reviewed 2026-06-30.

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Ogden building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.