Skip to main content
PermitBase

Fire Sprinkler and Fire Alarm Permit in Queen Creek, Arizona

Separate Fire permit required for automatic sprinkler systems, fire alarm systems, and related fire protection systems in Queen Creek — distinct from, and not included in, the Building Permit. The Town's fee schedule makes the separation explicit: the combination building permit line reads 'Building permit - Combination (not including Fire Systems)'. The Town's 'When is a Permit Required?' page lists 'Fire sprinklers, alarms and alarm panels' among the activities requiring a permit, and Fire Prevention publishes its own permit, plan review, and inspection fee tables in the adopted Development Services Fee Schedule. Submittal requirements are published by Building Safety on a dedicated 'Sprinkler & Alarm Submittals' page covering both Fire Sprinkler Submittal Requirements and Fire Alarm Submittal Requirements. Queen Creek has adopted the International Fire Code, 2021 edition.

Verified 2026-08-15 · Source

When you need this permit

  • Submit a minimum of 3 sets of all working drawings (both sprinkler and alarm submittals)
  • For sprinklers: submit 3 sets of hydraulic calculations and manufacturer data sheets for all equipment, i.e. sprinkler heads and backflow preventer
  • Acceptable paper size shall be limited to 24" x 36"
  • Minimum scale shall be 1/8"; text height to be a minimum of 3/32"
  • All submittals shall bear a dated review certification and signature of a minimum level III NICET certified engineering technician (CET) automatic sprinkler systems or an Arizona Registered Professional Engineer — the Town notes this 'shall not reduce the requirements required by the State of Arizona Board of Technical Registration for a registrant's seal'
  • For fire alarms: include voltage drop calculations for each notification appliance circuit showing wire size, circuit current and voltage drop (optional if shown on plans)
  • For fire alarms: include standby battery calculations for each control panel, sub panel, power booster, central station transmitter, and power supply
  • For tenant improvements, no sprinkler submittal is required for adding or relocating 3 heads or less
  • Deviations from approved plans will require approval from the fire code official
  • Field inspection is required for both sprinkler and alarm systems
  • Plan review fees are collected at the time of submittal

Required documents

Check off what you have — your progress is saved on this device.

Not ready yet0 of 4 required documents checked.

This checker covers one permit. A full project usually triggers several — our checklist will assemble all of them, free →

Fee schedule

Fire Sprinkler Systems — Base Permit FeeTown of Queen Creek Development Services Fee Schedule, 'Valuation Data Updated - Effective 4/1/2026', Fire Prevention section, document page 10 (PDF page 11), item 10(a). The fee schedule is a scanned PDF with no extractable text layer; this figure was read from a rendered page image, not from text extraction.
$250. Per the fee schedule: 'The base permit fee to install an automatic sprinkler system is $250. This fee is for the inspection (one rough-in, one follow-up and one final inspection) of one building, no greater than 50,000 sq ft, with 1-2 calculations. The maximum inspection time covered by this base permit is two and one-half hours. Additional inspection time will be calculated at the rate of $100/hour.'
Fire Sprinkler Systems — Base Plan Review FeeSame fee schedule, Fire Prevention plan review tables, document page 13 (PDF page 14), item 4. Read from the rendered page image.
$250 for review of one building no greater than 50,000 sq ft with 1-2 calculations; maximum plan review time covered is two and one-half hours, with additional review time at $100/hr. Add-ons include $100 for additional calculations (design areas) 12,001-50,000 sq ft, $100 for each additional 50,000 sq ft or fraction thereof, $100 for each additional building using the same fire protection design plan, $100 for each additional story above or below grade, and $50 for each PRV (pressure reducing valve).
Fire Alarm Systems — Base Permit FeeSame fee schedule, document page 11 (PDF page 12), item 12. Read from the rendered page image.
$250. Per the fee schedule: 'The base permit fee to install a fire alarm system (including initiation/notification devices and fire alarm panel replacement) is $250. This fee is for the inspection (one rough-in, one follow-up and one final inspection) of one building, no greater than 50,000 sq ft. The maximum inspection time covered by this base permit is two and one-half hours. Additional inspection time will be calculated at the rate of $100/hour.' Add-ons include $200 for each additional building using the same fire protection, $200 for each additional 50,000 sq ft or fraction thereof, and $100 for each additional story above or below grade.
Fire Alarm Systems — Base Plan Review FeeSame fee schedule, document page 14 (PDF page 15), item 6. Read from the rendered page image.
$250 for review of one building no greater than 50,000 sq ft; maximum plan review time covered is two and one-half hours, with additional review time at $100/hr. Add-ons are $100 each for an additional building using the same fire protection design plan, each additional 50,000 sq ft or fraction thereof, each additional story above or below grade, and each first/additional group of 1-10 flame detection, beam detection, or emergency voice/alarm communication devices.
Fire Sprinkler Systems ModificationPermit figures: document page 11 (PDF page 12), item 11. Plan review figures: document page 14 (PDF page 15), item 5. Both read from rendered page images.
Permit: $200 for 1-200 heads, $200 for each additional 1-200 heads or fraction thereof, $100 for each story above or below. Plan review: $100 for 1-200 heads, $100 for each additional 1-200 heads or fraction thereof, $100 for each story above or below.
Fire Alarm Systems ModificationPermit figures: document page 11 (PDF page 12), item 13. Plan review figures: document page 14 (PDF page 15), item 7. Both read from rendered page images.
Permit: $100 to modify a fire alarm system (1-5 devices), plus $100 for each additional 1-25 devices. Plan review: $100 to modify a fire alarm system (1-10 devices), plus $100 for each additional 1-25 devices. NOTE: the device-count threshold genuinely differs between the two tables in the adopted schedule (1-5 devices in the permit table, 1-10 devices in the plan review table) — reproduced as published rather than silently reconciled.
Fire Building Plan ReviewSame fee schedule, document page 13 (PDF page 14), item 3. Read from the rendered page image. This is a fire review of the building plans, separate from the sprinkler and alarm system reviews above.
$250 to review building plans for all occupancies, including town homes (exception: 1 and 2 family dwellings), covering the first 50,000 sq ft of one building; minimum plan review time is two and one-half hours, additional plan review time at $100/hr. Each additional 50,000 sq ft (or fraction thereof) is $100, and each additional building using the same plan is $100.
Civil Plan Review — underground fire linesSame fee schedule, document page 13 (PDF page 14), item 2. Read from the rendered page image.
$300 minimum plan review fee to review plans for installation, alteration or modification of under-ground fire lines which serve fire protection systems, hydrants, or any combination thereof; plus $150 for each connection to a Town water main including up to 500 lineal feet of pipe, $100 for each additional 500 feet or fraction thereof, and $100 for each fire protection system lead-in (or stub-out).
Fire Sprinkler / Fire Alarm plan review — tenant improvement waiverTown of Queen Creek Sprinkler & Alarm Submittals page, Fire Sprinkler Submittal Requirements item 7. This carve-out is specific to tenant improvements and does not apply to new construction.
No sprinkler submittal (and therefore no sprinkler plan review) is required for tenant improvements adding or relocating 3 heads or less.

Review timeline

Plan review
Not published — contact the department

How long did your Fire Sprinkler and Fire Alarm Permit permit actually take in Queen Creek?

Anonymous — one question, no email. Answers are combined and only shown once at least 5 people have reported.

Inspection process

  1. 1

    Rough-In

    First of the three inspections covered by the $250 base permit fee for both sprinkler and alarm systems. Field inspection is required; deviations from approved plans require approval from the fire code official.

  2. 2

    Follow-Up

    Second of the three inspections covered by the base permit fee. Inspection time beyond the two-and-one-half hours covered by the base permit is billed at $100/hour.

  3. 3

    Final

    Third of the three inspections covered by the base permit fee, verifying the installed sprinkler or alarm system against approved plans.

See the full Queen Creek inspection guide — scheduling & re-inspection fees →

Tips

  • Fire systems are carved out of the building permit by name. The Development Services Fee Schedule's very first Building Safety permit line reads 'Building permit - Combination (not including Fire Systems)' — so budget the fire permit and fire plan review fees separately from the building permit.
  • The $250 base is not the whole bill. Both sprinklers and alarms are billed TWICE at $250 — once as a permit fee and once as a plan review fee — so a straightforward single-building sprinkler job starts at $500 before any add-ons, and a job with both sprinkler and alarm systems starts at $1,000.
  • Both base fees only cover two and one-half hours. Anything beyond that (inspection time or plan review time) is billed at $100/hour, and the base fee only covers one building up to 50,000 sq ft.
  • SUPERSEDED-SOURCE WARNING: the Town's 'Fire Permits, Fees & Inspections' page still links a 'General Fire Prevention Fees' PDF whose internal PDF creation date is September 14, 2010. Its figures do NOT all match the currently adopted schedule — for example, the 2010 document prices the Medium Risk operating permit at '$75.00; paid in annual installments of $37.50', while the adopted Development Services Fee Schedule effective 4/1/2026 prices the same line at '$75; paid biennially'. Use the 4/1/2026 Development Services Fee Schedule, not the linked 2010 PDF.
  • For tenant improvements only, adding or relocating 3 sprinkler heads or fewer requires no submittal at all. Above that threshold the full submittal and fee structure applies.
  • Plans must be certified by a NICET Level III (or higher) certified engineering technician or an Arizona Registered Professional Engineer — and the Town explicitly notes this does not substitute for the Arizona Board of Technical Registration's own seal requirements.

Frequently asked questions

Not if you are adding or relocating 3 heads or less — the Town's Fire Sprinkler Submittal Requirements explicitly waive the submittal for tenant improvements at or below that threshold. Above it, the full submittal, plan review and permit fees apply.

The base permit fee to install an automatic sprinkler system is $250, and the base plan review fee is a further $250, per the Development Services Fee Schedule effective 4/1/2026. Each $250 base covers one building no greater than 50,000 sq ft with 1-2 calculations and up to two and one-half hours of inspection or review time; additional time is billed at $100/hour.

Queen Creek does not publish a plan-review timeline for this permit. Contact Town of Queen Creek Development Services Department — Building Safety Division at 480-358-3003 for current turnaround.

You'll need: Working Drawings (3 sets minimum); Hydraulic Calculations and Manufacturer Data Sheets (3 sets); NICET Level III / Arizona P.E. Review Certification; Standby Battery Calculations. Depending on your project, Queen Creek may also ask for: Voltage Drop Calculations. See the required-documents checklist on this page for details on each.

Queen Creek requires 3 inspection(s) for a fire sprinkler and fire alarm permit, in order: Rough-In, Follow-Up, Final. Schedule each through Town of Queen Creek Development Services Department — Building Safety Division (480-358-3003).

Apply through Town of Queen Creek Development Services Department — Building Safety Division at Municipal Services Building, 22358 S. Ellsworth Road, Queen Creek, AZ 85142. Phone: 480-358-3003, email: development@QueenCreekAZ.gov. Office hours: Monday - Thursday, 7 a.m. - 6 p.m.; closed Fridays (Town offices closed Friday-Sunday). Applications are submitted electronically through the Development Nexus / Accela Citizen Access online portal (aca-prod.accela.com/QC). Building inspections are scheduled through Development Nexus or by phone/text; the cutoff for next-business-day inspection requests is 6:00 p.m. Inspection hours are 6 a.m.-1:30 p.m. Mon-Thu and 6-10 a.m. Fri (September-May), and 5:30 a.m.-12 p.m. Mon-Thu and 5:30-10 a.m. Fri (June-August). Building Official: Michael Williams, CBO, Building Safety Manager, Michael.Williams@QueenCreekAZ.gov, 480-358-3009.. Official information: https://www.queencreekaz.gov/government/development-services/building-safety.

Yes. The Town's adopted fee schedule names the separation directly — the combination building permit line reads 'Building permit - Combination (not including Fire Systems)' — and Fire Prevention publishes its own permit, plan review and inspection fee tables. The Town's 'When is a Permit Required?' page also lists fire sprinklers, alarms and alarm panels as separately permitted work.

All submittals must bear a dated review certification and signature of a minimum level III NICET certified engineering technician (CET) for automatic sprinkler systems, or an Arizona Registered Professional Engineer. The Town notes this does not reduce the seal requirements imposed by the Arizona Board of Technical Registration.