Roofing Permit (Re-Roof) — Telluride, Colorado · Requirements sheet
Verified 2026-07-13 · Source: https://telluride.gov/DocumentCenter/View/13559/2024-Building-Permit-Fees-PDF
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
Roofing Permit (Re-Roof) in Telluride, Colorado
Required for re-roofing work in the Town of Telluride, reviewed as a Building Permit under the same Table 1-A valuation-based fee schedule (no separate flat re-roof fee is published). Governed by the 2024 IBC/IRC as adopted, with mandatory snow-shed mitigation design (IBC 903.5/IRC R318.2.1) and the Town's Climatic and Geographic Design Criteria (ice barrier underlayment required, ground/roof snow load per the ASCE Hazard tool). HARC review is required for any visible roofing change since the town is a National Historic Landmark District.
Verified 2026-07-13 · Source
When you need this permit
- Reviewed under the 2024 IBC/IRC as adopted; billed under the same Building Permit Table 1-A valuation schedule (no standalone flat roofing fee published)
- Roof design must include snow-shed mitigation per IBC 903.5/IRC R318.2.1 so ice/snow does not shed onto occupied areas, egress doors, walkways, decks, or utility meters
- Ice barrier underlayment is required per the Town's Table R301.2 design criteria
- Roof snow loads determined per the ASCE Hazard tool or the Structural Engineer Association of Colorado's 'Snow Load Design Data for Colorado', whichever is most restrictive (IBC Section 1608.1 local amendment)
- HARC Certificate of Appropriateness required before permit issuance for any visible/exterior roofing material or design change, since roofing is exterior work within a National Historic Landmark District
- All contractors must hold a current Town of Telluride business license
Required documents
Check off what you have — your progress is saved on this device.
Not ready yet — 0 of 2 required documents checked.
This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29 →
Fee schedule
Review timeline
Inspection process
- 1
Final Inspection (roof)
Completed roof — snow-shed mitigation design, ice barrier underlayment, and flashing/valley compliance verified
See the full Telluride inspection guide — scheduling & re-inspection fees →
Tips
- Even a like-for-like re-roof requires HARC review in Telluride since roofing is visible exterior work within a National Historic Landmark District — do not assume a routine material swap skips historic-preservation review.
- Confirm your roofer's snow-shed mitigation design addresses Section 903.5/R318.2.1's specific list of protected areas (egress doors, walkways, decks, alleys, utility meters) rather than a generic snow-guard placement.
- Roof snow load in Telluride is no longer a single flat psf figure as of the 2024 code cycle — it is determined per the ASCE Hazard tool (or the stricter of that vs. the Structural Engineer Association of Colorado's own data), so a structural sign-off referencing the pre-2025 flat figure should be re-verified.
Frequently asked questions
Sources & verification
Verified against official sources. Last reviewed 2026-07-13.
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Telluride building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Other permits in Telluride
Roofing Permit (Re-Roof) in other cities
Compare roofing permit (re-roof) fees across Colorado →
Look up this fee in a different city →
Related guides
Now live
Build your Telluride project checklist
Describe your project once and get every permit, document, and fee it triggers in Telluride — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.
Get started →