EV Charger / EVSE Electrical Permit — Unincorporated Bannock County, Idaho · Requirements sheet
Verified 2026-07-20 · Source: https://dopl.idaho.gov/ele/ele-permits-and-inspections/
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
EV Charger / EVSE Electrical Permit in Unincorporated Bannock County, Idaho
Installation of an electric vehicle charging station (EVSE) in unincorporated Bannock County is an electrical permit. Per Section 301.B of the county's Building Code Ordinance (Ordinance No. 2020-07), all electrical work is referred to the State of Idaho — Bannock County issues no electrical permits at all. The Idaho Division of Occupational and Professional Licenses (DOPL) issues the EVSE electrical permit under its statewide fee rule (IDAPA 24.39.10.500), which has no distinct EV-charger/EVSE line item: a residential retrofit is billed as an 'Existing Dwelling Unit' inspection, and commercial installations use the wiring-cost-based commercial/industrial formula.
Verified 2026-07-20 · Source
When you need this permit
- Electrical permit required for EVSE circuit/charger installation — issued by Idaho DOPL, not Bannock County, per Section 301.B of the county's Building Code Ordinance
- Homeowners performing electrical work on their own primary/secondary residence may pull a Homeowner Electrical Permit directly from DOPL; otherwise a licensed Idaho electrical contractor pulls the permit
- Residential EVSE added to an existing dwelling is billed under DOPL's 'Existing Dwelling Unit' per-inspection fee — no separate EV-charger fee category exists
- Commercial/multi-family EVSE installations are billed under DOPL's wiring-cost-based commercial/industrial fee formula
- If the EVSE is paired with new structural work (e.g., a carport/canopy), that structural scope requires a separate Bannock County building permit
Required documents
Check off what you have — your progress is saved on this device.
Fee schedule
Review timeline
Inspection process
- 1
Electrical Rough-In / Final (DOPL)
EVSE circuit, breaker, disconnect (if required), and grounding verified by a state-assigned DOPL electrical inspector
See the full Unincorporated Bannock County inspection guide — scheduling & re-inspection fees →
Tips
- Bannock County issues no electrical permits of any kind — apply directly to Idaho DOPL for an EVSE circuit, the same as for any other electrical work in unincorporated Bannock County.
- There is no EV-charger-specific fee category in Idaho's electrical permit fee rule (IDAPA 24.39.10.500); a residential retrofit is billed as an 'Existing Dwelling Unit' inspection ($65), while commercial installations use the wiring-cost-based formula.
Frequently asked questions
Sources & verification
Verified against official sources. Last reviewed 2026-07-20.
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Unincorporated Bannock County building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Other permits in Unincorporated Bannock County
EV Charger / EVSE Electrical Permit in other cities
Compare ev charger / evse electrical permit fees across Idaho →
Look up this fee in a different city →
Related guides
Now live
Build your Unincorporated Bannock County project checklist
Describe your project once and get every permit, document, and fee it triggers in Unincorporated Bannock County — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.
Get started →