Skip to main content
PermitBase

Fire Suppression (Sprinkler) System Permit in Manhattan, Montana

Required as a separate permit, in addition to the base building permit, for installation of a fire suppression (sprinkler/standpipe) system in Manhattan. The Town's own building-permit guide states plainly that 'Separate permits are required for mechanical and fire suppression systems' beyond the base building permit. Manhattan's Montana DLI certification (Building, Mechanical, Plumbing, Electrical, and Swimming Pool) does not include a distinct 'Fire' trade category — fire-protection-system provisions (NFPA 13/13R/14, referenced via IBC Chapter 9) are administered under the Town's Building (B) certification per state rule, so this permit is issued through the Town Building Department alongside — not instead of — the base building permit. No standalone fire-alarm-specific permit language was found; the Town's published guidance addresses fire suppression/sprinkler systems specifically, not fire alarm systems as a separate documented category.

Reviewed 2026-07-22 · Source

When you need this permit

  • A separate permit — beyond the base building permit — is required for fire suppression systems, per the Town of Manhattan 'How To Obtain A Building Permit' guide: 'Separate permits are required for mechanical and fire suppression systems.'
  • Fire protection system provisions (sprinkler, standpipe) are governed by NFPA 13/13R/14 as referenced in the state-adopted IBC Chapter 9, per Administrative Rules of Montana 24.301.146, which applies 'to both the department's and local government code enforcement programs' — i.e., to both DLI-direct-administered areas and DLI-certified local jurisdictions like Manhattan
  • Manhattan is Montana DLI-certified for Building (B), Mechanical (M), Plumbing (P), Electrical (E), and Swimming Pool (SP) — there is no separate 'Fire' certification category on the DLI's Certified City, County and Town Programs roster, so fire-protection-system review for a B-certified jurisdiction like Manhattan falls under the Town's Building certification rather than a distinct fire-marshal certification track
  • Application submitted at the Town Office; Manhattan Town Code 12-1-2.C requires plan review and inspections to be conducted per the rules and procedures of the City of Bozeman Building Code Enforcement Division, which would apply to this permit as with the base building permit

Required documents

Check off what you have — your progress is saved on this device.

Not ready yet0 of 2 required documents checked.

This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29

Fee schedule

Filing fee
Not published — contact the department

Review timeline

Plan review
Not published — contact the department

How long did your Fire Suppression (Sprinkler) System Permit permit actually take in Manhattan?

Anonymous — one question, no email. Answers are combined and only shown once at least 5 people have reported.

Inspection process

  1. 1

    Rough-In / Underground

    Underground piping and rough sprinkler/standpipe installation inspected before concealment; no dedicated fire-suppression inspection checklist is published by the Town, so this follows the same rough-in/final pattern documented for the Town's other trade permits

  2. 2

    Final / Certificate of Occupancy

    System tested and verified operational; builders must notify the Building Department for final inspection before occupancy, per the Town's general Certificate of Occupancy procedure

See the full Manhattan inspection guide — scheduling & re-inspection fees →

Tips

  • Manhattan has no dedicated standalone fire-suppression-system permit application, fee schedule, or checklist published online — the only documentation found is a single line in the Town's 'How To Obtain A Building Permit' guide confirming a separate permit (beyond the base building permit) is required for fire suppression systems.
  • Manhattan's Montana DLI certification covers Building, Mechanical, Plumbing, Electrical, and Swimming Pool — there is no separate 'Fire' certification category, so fire-protection-system plan review is handled as part of the Town's Building (B) certification rather than by a distinct fire marshal's office.
  • Fire alarm systems specifically are not addressed anywhere found in the Town's published materials — only 'fire suppression systems' (sprinklers/standpipes) are named. Confirm fire alarm permitting requirements directly with Building Official Brandon Yung at (406) 595-9300.

Frequently asked questions

Manhattan requires a fire suppression (sprinkler) system permit for: A separate permit — beyond the base building permit — is required for fire suppression systems, per the Town of Manhattan 'How To Obtain A Building Permit' guide: 'Separate permits are required for mechanical and fire suppression systems.'; Fire protection system provisions (sprinkler, standpipe) are governed by NFPA 13/13R/14 as referenced in the state-adopted IBC Chapter 9, per Administrative Rules of Montana 24.301.146, which applies 'to both the department's and local government code enforcement programs' — i.e., to both DLI-direct-administered areas and DLI-certified local jurisdictions like Manhattan; Manhattan is Montana DLI-certified for Building (B), Mechanical (M), Plumbing (P), Electrical (E), and Swimming Pool (SP) — there is no separate 'Fire' certification category on the DLI's Certified City, County and Town Programs roster, so fire-protection-system review for a B-certified jurisdiction like Manhattan falls under the Town's Building certification rather than a distinct fire-marshal certification track; Application submitted at the Town Office; Manhattan Town Code 12-1-2.C requires plan review and inspections to be conducted per the rules and procedures of the City of Bozeman Building Code Enforcement Division, which would apply to this permit as with the base building permit. If your project isn't listed, confirm with Town of Manhattan Building Division at (406) 284-3235 before starting work.

Manhattan does not publish a plan-review timeline for this permit. Contact Town of Manhattan Building Division at (406) 284-3235 for current turnaround.

You'll need: Building/Electrical/Mechanical/Plumbing Permit Application; Fire Suppression System Design Plans. See the required-documents checklist on this page for details on each.

Manhattan requires 2 inspection(s) for a fire suppression (sprinkler) system permit, in order: Rough-In / Underground, Final / Certificate of Occupancy. Schedule each through Town of Manhattan Building Division ((406) 284-3235).

Apply through Town of Manhattan Building Division at 207 South Sixth Street (P.O. Box 96), Manhattan, MT 59741. Phone: (406) 284-3235, email: townofmanhattan@gmail.com. Office hours: Town Office, 207 S. 6th St., Manhattan, MT 59741, Monday-Friday 8:30 AM - 5:00 PM (Town Office/Zoning: 406-284-3235; Building Official Brandon Yung: 406-595-9300, byung.town@gmail.com). Official information: https://www.townofmanhattan.com/building-zoning.

Manhattan, Montana has adopted: Montana has a mandatory statewide building code administered by the Montana Department of Labor & Industry (DLI) Building Codes Bureau, amended by the Administrative Rules of Montana (ARM) Title 24, Chapter 301. Cities, counties, and towns may become 'certified' to locally administer permitting and inspection for all or part of the code (building, plumbing, electrical, mechanical, swimming pool, etc.); non-certified areas/trades fall under direct state administration by the DLI Building Codes Bureau. Source: Montana DLI Building Codes Bureau, Certified City, County and Town Programs list (bsd.dli.mt.gov/_docs/building-codes-permits/certified-city.pdf) and Current Codes page (bsd.dli.mt.gov/building-codes-permits/current-codes).; Manhattan is a Montana DLI-certified jurisdiction for Building (B), Mechanical (M), Plumbing (P), Electrical (E), AND Swimming Pool (SP) within Manhattan town limits — full certification across all five trade categories, matching Billings and Belgrade. Certified building official on file with DLI: Brandon Yung. Verified directly against the DLI's official 'Certified City, County and Town Programs' roster (PDF, updated 2026-04-22): the Manhattan row reads 'Manhattan | B, M, P, E, SP | Brandon Yung | | City Limits'. Source: https://bsd.dli.mt.gov/_docs/building-codes-permits/certified-city.pdf; Manhattan Town Code section 12-1-1 (Adoption Of The Model Technical Codes And Administrative Rules): 'The current editions of the model uniform technical codes, to include, but not be limited to, building, plumbing, electrical and mechanical, and all accompanying appendices, amendments and modifications adopted or required to be adopted by the building codes bureau, Montana department of labor and industry (or its successor) as set out in the administrative rules of Montana, as amended from time to time by the building codes bureau, are adopted by reference.' This incorporates the same statewide code editions used by other DLI-certified Montana jurisdictions (2021 IBC, 2021 IRC, 2021 IMC, 2021 IFGC, 2021 IEBC, 2021 UPC, 2021 IECC, 2021 ISPSC, 2020 NEC, ICC A117.1-2017), automatically updated as the Building Codes Bureau amends ARM Title 24, Chapter 301 (effective 60 days after a signed mayoral administrative order per 12-1-1.C). Source: Manhattan Town Code 12-1-1, https://codelibrary.amlegal.com/codes/manhattanmt/latest/manhattan_mt/0-0-0-6397 (Ord. 287, 2-10-2004; amd. Ord. 299, 11-9-2004; Ord. 06-007, 6-13-2006; Ord. 24-005, 5-9-2024); Manhattan Town Code section 12-1-2.C: 'Plans shall be reviewed and inspections made in accordance with the rules and procedures of the Bozeman city building code enforcement division.' This is a notable local arrangement — Manhattan's own Building Official (Brandon Yung) issues permits locally under Manhattan's DLI certification, but plan review and inspection procedure follows the City of Bozeman Building Division's rules and procedures. Source: Manhattan Town Code 12-1-2, https://codelibrary.amlegal.com/codes/manhattanmt/latest/manhattan_mt/0-0-0-6411 (Ord. 297, 8-9-2004; amd. Ord. 24-005, 5-9-2024); Manhattan Town Code Title 12, Chapter 1 (Building Codes) is available at https://codelibrary.amlegal.com/codes/manhattanmt/latest/manhattan_mt/0-0-0-6392; Manhattan Town Code Title 10, Chapter 2 (Administration and Enforcement / Zoning Permit) at https://codelibrary.amlegal.com/codes/manhattanmt/latest/manhattan_mt/0-0-0-3289. Local amendments apply — see the Manhattan overview page for the full list.

Yes. The Town's 'How To Obtain A Building Permit' guide states plainly that separate permits are required for mechanical and fire suppression systems, in addition to the base building permit. No standalone fee, form, or review-timeline figure for this permit is published online; contact Building Official Brandon Yung at (406) 595-9300 for current requirements.

Not conclusively documented. Manhattan is Montana DLI-certified for Building, which under state rule (ARM 24.301.146) covers fire-protection-system provisions referenced in IBC Chapter 9 for certified local programs. Whether the Montana State Fire Marshal's Office separately reviews plans for certain occupancy types under ARM Title 23 could not be confirmed from published sources during this chase; confirm directly with the Town Building Official.

Sources & verification

Key facts verified against official sources. Last reviewed 2026-07-22.

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Manhattan building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.