Alpine building inspections
VerifiedInspection sequence, scheduling, and re-inspection fees for building permits in Alpine, Utah.
Verified 2026-07-08 · Source
How to schedule
Inspections are requested through the building department below.
- Address
- 20 North Main, Alpine, UT 84004
- Phone
- (801) 756-6347
- mfox@alpineUT.gov
- Office hours
- Mon–Fri 8:00 AM – 5:00 PM
- Website
- Official site
Inspection sequence
Applies to: Commercial Building Permit
- 1
Site/Infrastructure Inspection
During site plan review, an inspection is made of the job site (street, sidewalk, and surrounding infrastructure) to document any existing damage before construction begins, per Alpine's established practice for new construction (New Home Form #2 instructions, applied here to commercial sites).
- 2
Framing, Electrical, Plumbing, Mechanical Inspections
Trade inspections scheduled by calling the Building Inspection Line at (801) 756-0208.
- 3
Special Inspections
Independent special inspections, billed at the Consolidated Fee Schedule's $130 Special Inspections fee, as required for the specific structure under the adopted IBC.
- 4
Final Inspection
Final inspection confirming construction is completed, any infrastructure damage has been repaired, and all inspection items have been resolved.
Applies to: Commercial Tenant Improvement / Tenant Finish Permit
- 1
Framing/Structural Rough-In
Wall sections and structural changes verified per submitted plans before close-in, scheduled via the Building Inspection Line at (801) 756-0208.
- 2
Electrical/Plumbing/Mechanical Rough-In
MEP trade inspections for interior tenant-finish work, scheduled via the Building Inspection Line at (801) 756-0208.
- 3
Final Inspection
Final inspection confirming completed tenant-finish work before occupancy.
Applies to: Residential Building Permit (New Home)
- 1
Site/Infrastructure Inspection
During site plan review, an inspection is made of the job site (street, sidewalk, and surrounding infrastructure) to document any existing damage before construction begins, per Alpine's official Building Permit Instructions.
- 2
Framing, Electrical, Plumbing, Mechanical Inspections
Trade inspections scheduled by calling the Building Inspection Line at (801) 756-0208.
- 3
Final Inspection
Final inspection confirming construction is completed, any infrastructure damage has been repaired, and all inspection items have been resolved, per Alpine's official Building Permit Instructions.
Applies to: Change of Use / Change of Occupancy (Commercial Business License)
- 1
Fire Inspection
Step 3 of Alpine's official Commercial Business License process: 'Arrange for a fire inspection.' Conducted for the new occupancy before the license is issued.
- 2
Building/Zoning Inspection (if applicable)
Alpine's Business Licenses page notes that 'Building, Fire, and/or Zoning inspections will be required of certain businesses' as part of licensing.
Applies to: Solar PV / Solar Energy System Permit
- 1
Electrical Inspection
Inspection of the PV system's electrical interconnection (wiring, disconnect, inverter, panel/meter tie-in), scheduled via the Building Inspection Line at (801) 756-0208.
- 2
Final Inspection
Final inspection confirming the completed installation before the system is approved for use, per Alpine's standard building-permit inspection practice.
Re-inspection fees
Sources & verification
Verified against official sources. Last reviewed 2026-07-08.
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Alpine building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Alpine building permits
Get alerts for Alpine
We'll email you when Alpine's fees, documents, or codes change — not often.
We only use your email to send permit updates. No spam, unsubscribe anytime. Privacy.