Skip to main content
PermitBase

Fire Alarm System Permit in Unincorporated Natrona County, Wyoming

Construction permit required from the Natrona County Fire Protection District (NCFPD) Office of the Fire Marshal before installing or modifying a fire alarm system in unincorporated Natrona County, under the adopted 2024 International Fire Code § 105.6 and NFPA 72 (2025 edition). Processed separately from the county Building Department's building/electrical permits, through the district's own NCFPDpermits.com web portal.

Verified 2026-07-22 · Source

When you need this permit

  • Submit a Construction Permit application through the NCFPDpermits.com web portal to the NCFPD Office of the Fire Marshal before installing or modifying a fire alarm system, per adopted 2024 International Fire Code § 105.6
  • Plans must be submitted for review; permit fee is based on total device count (FACP, FAAP, heat/smoke detectors, horn/strobes, beam detectors, etc.)
  • Reviewed under NFPA 72 (2025 edition) as referenced by the adopted 2024 IFC
  • If the installation spans multiple floors, an additional per-floor charge applies for each floor above or below the first floor
  • All required inspections, including acceptance testing, must be requested in advance (24–48 hours) through the NCFPDpermits.com portal — the initial permit fee covers plan review and all required inspections
  • Work started without a valid permit is subject to a doubled fee for each fire protection system installed
  • Construction permits become invalid if work is not commenced within 180 days of issuance, or if work is suspended/abandoned for 180 days after commencing

Required documents

Check off what you have — your progress is saved on this device.

Not ready yet0 of 2 required documents checked.

This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29

Fee schedule

NEW Fire Alarm System — 1-10 devicesNCFPD Office of the Fire Marshal Construction Permit fee schedule, effective as of July 20, 2026; fee includes plan review and all required inspections including acceptance testing
$200.00
NEW Fire Alarm System — 11-20 devices
$225.00
NEW Fire Alarm System — 21-200 devices
$275.00
NEW Fire Alarm System — 201+ devices
$375.00
Modified Fire Alarm System — 10+ devices and/or FACP replacement
$175.00
Additional floor charge (new or modified)
$25.00 per floor above or below the first floor
Work started without a valid permitNCFPD Construction Permit fee schedule
Doubled fee for each fire protection system installed

Review timeline

Plan review
Not published — contact the department

How long did your Fire Alarm System Permit permit actually take in Unincorporated Natrona County?

Anonymous — one question, no email. Answers are combined and only shown once at least 5 people have reported.

Inspection process

  1. 1

    Rough-In / Device Placement

    Wiring and device placement inspected before concealment, if applicable to the installation

  2. 2

    Acceptance Test

    Full system acceptance testing per NFPA 72, required before the permit is closed out; must be scheduled 24-48 hours in advance through the NCFPDpermits.com portal

See the full Unincorporated Natrona County inspection guide — scheduling & re-inspection fees →

Tips

  • Fire alarm permits in Natrona County are handled entirely separately from the county Building Department — apply and schedule all inspections through NCFPDpermits.com, not the county's ViewPointCloud portal.
  • The permit fee is priced by device count (FACP, FAAP, detectors, horn/strobes, beam detectors, etc.), not by job valuation — count your devices before applying to estimate the correct fee tier.
  • Starting work without a valid NCFPD construction permit doubles the fee for each fire protection system installed — this is separate from and in addition to the county Building Department's own triple-fee penalty for unpermitted building work.

Frequently asked questions

Unincorporated Natrona County requires a fire alarm system permit for: Submit a Construction Permit application through the NCFPDpermits.com web portal to the NCFPD Office of the Fire Marshal before installing or modifying a fire alarm system, per adopted 2024 International Fire Code § 105.6; Plans must be submitted for review; permit fee is based on total device count (FACP, FAAP, heat/smoke detectors, horn/strobes, beam detectors, etc.); Reviewed under NFPA 72 (2025 edition) as referenced by the adopted 2024 IFC; If the installation spans multiple floors, an additional per-floor charge applies for each floor above or below the first floor; All required inspections, including acceptance testing, must be requested in advance (24–48 hours) through the NCFPDpermits.com portal — the initial permit fee covers plan review and all required inspections; Work started without a valid permit is subject to a doubled fee for each fire protection system installed; Construction permits become invalid if work is not commenced within 180 days of issuance, or if work is suspended/abandoned for 180 days after commencing. If your project isn't listed, confirm with Natrona County Building Department at (307) 235-9435 before starting work.

By total device count: $200 for 1-10 devices up to $375 for 201+ devices for a new system, or $175 for a modified system with 10+ devices or an FACP replacement, plus a $25 per-floor charge for installations spanning multiple floors. The fee covers plan review and all required inspections, including acceptance testing.

Unincorporated Natrona County does not publish a plan-review timeline for this permit. Contact Natrona County Building Department at (307) 235-9435 for current turnaround.

You'll need: NCFPD Fire Alarm Plan Submittal Requirements; Fire alarm system plans. See the required-documents checklist on this page for details on each.

Unincorporated Natrona County requires 2 inspection(s) for a fire alarm system permit, in order: Rough-In / Device Placement, Acceptance Test. Schedule each through Natrona County Building Department ((307) 235-9435).

Apply through Natrona County Building Department at 200 N. Center St, Room 205, Casper, WY 82601. Phone: (307) 235-9435, email: Contact via natronacounty-wy.gov (email obfuscated on site; call 307-235-9435). Office hours: Monday–Friday, 8:00 AM–5:00 PM. Official information: https://www.natronacounty-wy.gov/170/Building-Inspection.

Unincorporated Natrona County, Wyoming has adopted: 2024 International Building Code (IBC) — adopted by Resolution 84-24; 2024 International Residential Code (IRC) — adopted by Resolution 90-24; 2024 International Existing Building Code (IEBC) — adopted by Resolution 85-24; 2024 International Fire Code (IFC) — adopted by Resolution 86-24; 2024 International Fuel Gas Code (IFGC) — adopted by Resolution 87-24; 2024 International Mechanical Code (IMC) — adopted by Resolution 88-24; 2024 International Plumbing Code (IPC) — adopted by Resolution 89-24; 2023 National Electrical Code (NEC / NFPA 70) — adopted by county resolution. Local amendments apply — see the Unincorporated Natrona County overview page for the full list.

The Natrona County Fire Protection District (NCFPD) Office of the Fire Marshal, not the county Building Department. Apply through the district's NCFPDpermits.com web portal under the adopted 2024 International Fire Code and NFPA 72 (2025 edition).

Sources & verification

Verified against official sources. Last reviewed 2026-07-22.

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Unincorporated Natrona County building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.