EV Charger / EVSE Permit — Unincorporated Natrona County, Wyoming · Requirements sheet
Verified 2026-07-20 · Source: https://www.natronacounty-wy.gov/170/Building-Inspection
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
EV Charger / EVSE Permit in Unincorporated Natrona County, Wyoming
Natrona County does not publish a distinct EV charger/EVSE fee line. Installing electric vehicle charging equipment requires a standard Electrical Permit from the Natrona County Building Department under the adopted 2023 NEC (which includes Article 625, Electric Vehicle Power Transfer System), billed under the same combined valuation-based fee table used for all electrical, building, plumbing, and mechanical permits (Resolution No. 45-20) — there is no separate flat electrical-permit fee. Work must be performed by, or under, a Natrona County-licensed Electrical Contractor, Master, Journeyman, or Apprentice electrician, since the county runs its own local electrical licensing program rather than using the Wyoming State Fire Marshal's statewide program.
Verified 2026-07-20 · Source
When you need this permit
- Electrical Permit Application submitted to the Natrona County Building Department (in person, mail, or online via ViewPointCloud) for EV charger/EVSE circuit installation
- Specify nature of building (Residential/Commercial), nature of project, and Service Type (New/Existing/Temporary) with Amps and Volts
- Job valuation must be declared — fee follows the same county valuation-based fee table used for all trades
- Work must be performed by, or under, a Natrona County-licensed Electrical Contractor, Master, Journeyman, or Apprentice electrician
- Governed by the adopted 2023 National Electrical Code (NEC/NFPA 70), which includes Article 625 (Electric Vehicle Power Transfer System)
- No distinct EV charger/EVSE fee line, expedited timeline, or SolarAPP+-style instant-permitting platform was found published by the county as of this review
Required documents
Check off what you have — your progress is saved on this device.
Not ready yet — 0 of 1 required documents checked.
This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29 →
Fee schedule
Review timeline
Inspection process
- 1
Rough-In
Wiring, conduit, and box placement inspected before walls are closed, if applicable
- 2
Final
EVSE equipment installed, circuit labeled, system energized and inspected by the county Building Department
See the full Unincorporated Natrona County inspection guide — scheduling & re-inspection fees →
Tips
- Natrona County has no distinct EV charger/EVSE fee — installation is billed under the same valuation-based fee table as any other electrical permit, starting at $70 for low-valuation work.
- Confirm your electrician holds a current Natrona County electrical license — this county runs its OWN electrical licensing program, separate from the Wyoming State Fire Marshal's statewide program used in most other unincorporated WY counties.
Frequently asked questions
Sources & verification
Verified against official sources. Last reviewed 2026-07-20.
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Unincorporated Natrona County building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Other permits in Unincorporated Natrona County
EV Charger / EVSE Permit in other cities
Compare ev charger / evse permit fees across Wyoming →
Look up this fee in a different city →
Related guides
Now live
Build your Unincorporated Natrona County project checklist
Describe your project once and get every permit, document, and fee it triggers in Unincorporated Natrona County — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.
Get started →