Plumbing Permit in Glendale, Arizona

Plumbing work in Glendale is governed by the 2024 International Plumbing Code (IPC, with Appendices C and E) as adopted by Ordinance O25-51, effective January 9, 2026. Residential plumbing permits are applied for using the Permit/Plan Review Application (Residential 2026). Glendale charges plumbing permit fees on a per-item basis (base fee plus individual fixture, sewer, water piping, and drainage counts).

Verified 2026-06-29 · Source

When you need this permit

Required documents

Fee schedule

Fee typeAmountNotes
Plumbing permit — base fee$29.79 base feeCity of Glendale Fee Schedule, Residential Fees — Plumbing Permit: Base Permit Fee (effective May 10, 2019).
Fixtures$11.78 eachCity of Glendale Fee Schedule — Plumbing Fixtures (effective May 10, 2019).
Sewer$31.23City of Glendale Fee Schedule — Plumbing Sewer (effective May 10, 2019).
Water piping and drainage piping$6.00 per 100 linear feet (100 ft minimum)City of Glendale Fee Schedule — Water Piping and Drainage Piping (effective May 10, 2019).
Water heater$15.58 eachCity of Glendale Fee Schedule — Plumbing Permit: Water Heater (effective May 10, 2019). A water heater replacement requires a separate plumbing permit.
Gas piping (5 outlets or fewer)$7.78City of Glendale Fee Schedule — Gas Piping 5 outlets or less (effective May 10, 2019).
Gas piping (each additional outlet beyond 5)$1.36 eachCity of Glendale Fee Schedule — Gas Piping each additional outlet (effective May 10, 2019).
Gas clearance (when required by utility to establish service)$114.35 per requestCity of Glendale Fee Schedule — Gas Clearance (effective May 10, 2019). Inspection not included with the plumbing permit.
Plan review — Plumbing75% of the plumbing permit fee (minimum $122.88)City of Glendale Fee Schedule, Residential Fees — Plumbing Plan Review (effective May 10, 2019).

Review timeline

~110 business days

Typical estimate — confirm current times with the Glendale building department

Inspection process

  1. 1

    Underground / Rough Plumbing

    Before concrete is poured over underground plumbing, and before plumbing is concealed in walls or floor

  2. 2

    Final Plumbing

    After all fixtures are installed and system is complete

Tips

Frequently asked questions

Do I need a permit to replace a water heater in Glendale?
Yes. A water heater replacement requires a plumbing permit. The fee is $29.79 base plus $15.58 for the water heater. Source: City of Glendale Fee Schedule (effective May 10, 2019).

Sources & verification

Verified against official sources. Last reviewed 2026-06-29.

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Glendale building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.

Other permits in Glendale

Related guides

Get the AI compliance checklist

Upload your project scope, get a jurisdiction-specific checklist of everything you need. Coming soon.

We only use your email to send permit updates. No spam, unsubscribe anytime. Privacy.