Sign Permit / Sign Code Compliance — Silver Cliff, Colorado · Requirements sheet
Verified 2026-08-14 · Source: https://library.municode.com/co/silver_cliff/codes/municipal_code?nodeId=TIT16ZO_CH1GEPR_S16-1-90VIPE
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
Sign Permit / Sign Code Compliance in Silver Cliff, Colorado
Town of Silver Cliff Municipal Code Title 16 (Zoning), Chapter 7 (Signs), Sections 16-7-10 through 16-7-110, sets detailed sign standards by zoning district (Urban Residential w/ subsurface mining, Urban Residential w/ home occupation certificate, Mobile Parks, Business District, Agricultural District) plus supplementary regulations governing size, height, illumination, setback, and temporary/political signage. No standalone 'sign permit' application, checkbox, or fee schedule was located anywhere in the Municipal Code, on the Building Permit Application form, or elsewhere on the Town's website; erecting or structurally altering a sign falls under Title 16 Sec. 16-1-110's general requirement that 'no building shall be erected, occupied, moved or structurally altered' without a building permit issued by the Zoning Enforcement Officer, administered by the same Building & Zoning Office that issues this file's other Town building permits. A Special Use Permit (Title 16, Chapter 8) is separately required only for an oversized for-sale sign on a lot of one acre or larger.
Verified 2026-08-14 · Source
When you need this permit
- No sign shall be erected, mounted, displayed, remodeled, reconstructed, maintained, or moved except as permitted by Title 16, Chapter 7 (Sec. 16-7-10(a))
- Sign standards vary by zoning district: e.g. Business District permits up to two signs identifying the business (max 4'x8' each, one per street/road frontage unless 100 ft separation), flush-mounted and not extending more than 3 ft over the public right-of-way at a minimum 8 ft clearance (Sec. 16-7-70)
- Supplementary regulations (Sec. 16-7-90): maximum sign height 16 ft; maximum display face 4 ft x 8 ft per side (both sides may be used); off-site signs set back 10 ft from traveled roadway/property line; no blinking, flashing, animated, oscillating, rotating, or moving signs; no beacons or searchlights for advertising
- Standard for-sale signs limited to 2'x3', max 4 ft height, one per street frontage, removed within 7 days of closing (Sec. 16-7-90(g)); a larger for-sale sign (up to 4'x4', 10 ft tall) on a lot of one acre or larger requires a Special Use Permit (Sec. 16-7-90(h))
- Temporary event signs (community, social, church/synagogue, entertainment, special/limited sale) may be placed up to 2 weeks before the event and must be removed within 1 week after (Sec. 16-7-90(i))
- Temporary political signs: max 1 per candidate/issue on private property (none on public right-of-way), max 8 sq ft, max 4 ft height, permitted in all zones, displayed up to 60 days before an election and removed within 10 days after (Sec. 16-7-90(j))
- Nonconforming signs existing at the time of the original ordinance may not be altered or enlarged without being brought into full conformance (Sec. 16-7-110)
- No dedicated sign-permit application, checkbox, or fee line exists on the Town's Building Permit Application form (confirmed by direct review of the Residential Building Permit Packet, which lists only New Construction/Addition/Alteration/Repair/Roof/Demolition/Excavation/Solar) — sign work is administered under the Title 16 Sec. 16-1-110 general building-permit requirement
Required documents
Check off what you have — your progress is saved on this device.
Not ready yet — 0 of 1 required documents checked.
This checker covers one permit. A full project usually triggers several — our checklist will assemble all of them, free →
Fee schedule
Review timeline
Inspection process
See the full Silver Cliff inspection guide — scheduling & re-inspection fees →
Tips
- Silver Cliff regulates signs closely by zoning district (size, height, illumination) but does not run a distinct sign-permit process — fold your sign into the Title 16 Sec. 16-1-110 general building-permit application with the Building & Zoning Office rather than looking for a separate 'sign permit' form.
- A standard for-sale sign (2'x3', 4 ft tall) needs no special use permit, but a larger for-sale sign (up to 4'x4', 10 ft tall) is only allowed on a lot of one acre or larger, and only with a Special Use Permit under Chapter 8 — don't assume the larger size is available town-wide.
- No sign anywhere in Town may blink, flash, animate, oscillate, rotate, or otherwise appear to move, and beacons/searchlights are prohibited outright — this applies uniformly across every zoning district's sign section.
Frequently asked questions
Sources & verification
Verified against official sources. Last reviewed 2026-08-14.
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Silver Cliff building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Other permits in Silver Cliff
Sign Permit / Sign Code Compliance in other cities
Compare sign permit / sign code compliance fees across Colorado →
Look up this fee in a different city →
Now live
Build your Silver Cliff project checklist
Describe your project once and get every permit, document, and fee it triggers in Silver Cliff — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.
Get started →