Residential Building Permit — Driggs, Idaho · Requirements sheet
Verified 2026-07-23 · Source: https://driggsidaho.org/departments/planning-and-building/building-information-applications/
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
Residential Building Permit in Driggs, Idaho
Required for any construction, addition, alteration, repair, relocation, demolition, or change in occupancy of a residential building or structure within the City of Driggs, including mechanical (HVAC) work. Electrical and plumbing work is permitted separately by the State of Idaho, not the City.
Verified 2026-07-23 · Source
When you need this permit
- Required for new construction, additions, alterations, repairs, relocations, and occupancy changes
- Complete construction plans stamped by an Idaho structural and architectural engineer for single- and two-family residential buildings
- Plans must comply with the adopted IRC and be drawn to City building plan standards (floor plans, elevations, sections, door/window schedules)
- Radon-resistant construction methods required per Appendix F of the IRC for new single- and two-family homes
- Site Plan (digitally drawn to scale by a professional) meeting the City's Site Plan Standards Checklist
- Exterior Lighting Plan showing lumen output, color temperature, and fixture type for all outdoor fixtures
- Design Review completion required first if the property is within the Design Review Overlay
- Submitted through the City's online Application Portal
Required documents
Check off what you have — your progress is saved on this device.
Not ready yet — 0 of 5 required documents checked.
This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29 →
Fee schedule
Review timeline
Inspection process
- 1
Foundation / Footings
Before concrete pour — footing and foundation wall dimensions, reinforcing steel verified against stamped plans
- 2
Framing
After framing and rough-in trades, before insulation or wall cover — structural members, egress, smoke detector wiring locations verified
- 3
Mechanical Rough-In
HVAC, gas line, and related mechanical equipment inspected by the City Mechanical Inspector before concealment
- 4
Final
All work complete per approved plans; proof of State Electrical and Plumbing inspection compliance required prior to Certificate of Occupancy
See the full Driggs inspection guide — scheduling & re-inspection fees →
Tips
- Allow up to 10 working days for plan review, or 20 working days for complex commercial buildings or hangars, per the City's published Review Process.
- Electrical and plumbing permits are issued by the State of Idaho Division of Occupational and Professional Licenses (DOPL, formerly Division of Building Safety), not the City — applicants must arrange those inspections separately and present proof of compliance before a Certificate of Occupancy is issued.
- Mechanical (HVAC, gas piping, fireplaces) work is inspected by the City's own Mechanical Inspector, not the State — contact Wyatt Penfold at (208) 709-6810.
- Contact the Building Inspector (Al Russo, (208) 709-5740) or Mechanical Inspector at least 24 hours in advance for inspections; requests made before 3:00 PM are scheduled for the next working day.
- A completed Building Permit & Site Plan Checklist must be uploaded with the application — incomplete submissions are not accepted for review.
- A $2,000 road damage bond is required if any road cutting for utilities is planned.
- Ground snow load is 85 psf and frost depth is 36 inches minimum — among the more stringent design criteria in the Teton Valley region. (Note: the City's own Building Permit Application Checklist & Process PDF still prints 90 psf; the codified Driggs City Code § 8-1-6 and the current Building Information & Applications webpage both state 85 psf as of 2026-07-23, and the ordinance figure is treated as controlling.)
- Structures within the Airspace Protection Overlay (near Driggs-Reed Memorial Airport) must submit FAA Form 7460-1 and receive FAA acknowledgment before the building permit can be issued.
- Storage sheds under 200 sq ft, fences under 7 feet, retaining walls under 4 feet, sidewalks/driveways, painting, prefabricated pools under 4 feet deep, and playground equipment are exempt from permitting.
Frequently asked questions
Sources & verification
Verified against official sources. Last reviewed 2026-07-23.
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Driggs building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Other permits in Driggs
Residential Building Permit in other cities
Compare residential building permit fees across Idaho →
Look up this fee in a different city →
Now live
Build your Driggs project checklist
Describe your project once and get every permit, document, and fee it triggers in Driggs — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.
Get started →