Skip to main content
PermitBase

Electrical Permit in West Valley City, Utah

Required for electrical work in West Valley City including panel upgrades, service changes, new circuits, and wiring installations. Governed by the 2023 National Electrical Code (NEC) as confirmed in WVC Design Criteria effective April 18, 2026. EV charger/EVSE installation is electrical work and falls under this general Electrical Permit; the WVC Permit Costs & Fees page lists only amperage-tiered electrical-upgrade fees ($53/$79.50/$95.40) with no separate EV-specific line item.

Verified 2026-06-29 · Source

When you need this permit

  • New electrical service or panel installation
  • Electrical service upgrade (increase in amperage, or replacement due to damage, relocation, or worn equipment)
  • New electrical circuits or wiring
  • Adding or relocating outlets, switches, or fixtures
  • Generator or solar panel electrical connections

Required documents

Check off what you have — your progress is saved on this device.

Not ready yet — 0 of 1 required documents checked.

This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29 →

Fee schedule

Electrical upgrade — less than 200 amp serviceWVC Permit Costs & Fees page (wvc-ut.gov/307); confirmed on WVC Residential Electrical Service Upgrade page (wvc-ut.gov/302)
$53
Electrical upgrade — 200 amps to 400 ampsWVC Permit Costs & Fees page (wvc-ut.gov/307); confirmed on WVC Residential Electrical Service Upgrade page (wvc-ut.gov/302)
$79.50
Electrical upgrade — over 400 amps or over 600 voltsWVC Permit Costs & Fees page (wvc-ut.gov/307); confirmed on WVC Residential Electrical Service Upgrade page (wvc-ut.gov/302)
$95.40
Re-inspection FeeWVC Permit Costs & Fees page (wvc-ut.gov/307)
$53 per occurrence

Review timeline

Plan reviewTypical estimate — confirm current times with the West Valley City building department
~1–5 business days

How long did your Electrical Permit permit actually take in West Valley City?

Anonymous — one question, no email. Answers are combined and only shown once at least 5 people have reported.

Inspection process

  1. 1

    Rough-In

    After wiring installed, before walls closed — verify box placement, wire sizing, proper support

  2. 2

    Service / Panel

    Panel installation, grounding electrode system, service entrance conductors. WVC contacts Rocky Mountain Power to authorize power after approval.

  3. 3

    Final

    All devices installed, GFCI/AFCI protection verified, panel labeled

See the full West Valley City inspection guide — scheduling & re-inspection fees →

Tips

  • All electrical work in West Valley City must comply with the 2023 National Electrical Code (NEC), confirmed in WVC Design Criteria effective April 18, 2026.
  • Utah law allows homeowners to perform electrical work on their own primary residence — a permit and all required inspections are still mandatory.
  • After inspection approval for a service upgrade, WVC contacts Rocky Mountain Power to authorize power. Expedited power-to-panel inspections can be arranged at least 48 hours in advance.
  • The permit must be taken out by the electrical contractor or the homeowner (for owner-occupied SFD). Owner-builder
  • A Level 2 EV charger install is billed under the standard amperage-tiered electrical-upgrade fee ($53–$95.40 depending on service size) — West Valley City has not published a distinct EV-charger permit or fee.

Frequently asked questions

West Valley City requires an electrical permit for: New electrical service or panel installation; Electrical service upgrade (increase in amperage, or replacement due to damage, relocation, or worn equipment); New electrical circuits or wiring; Adding or relocating outlets, switches, or fixtures; Generator or solar panel electrical connections. If your project isn't listed, confirm with West Valley City Building Inspection Division at (801) 963-3283 before starting work.

Per the WVC Permit Costs & Fees page and the Residential Electrical Service Upgrade page: $53 for upgrades under 200 amps, $79.50 for 200–400 amps, and $95.40 for over 400 amps or over 600 volts.

Plan review for an electrical permit in West Valley City typically runs 1–5 business days. This is an estimate, not a published figure — confirm current review times with West Valley City Building Inspection Division at (801) 963-3283.

You'll need: Permit Application. Depending on your project, West Valley City may also ask for: Electrical Plan / Single-Line Diagram. See the required-documents checklist on this page for details on each.

West Valley City requires 3 inspection(s) for an electrical permit, in order: Rough-In, Service / Panel, Final. Schedule each through West Valley City Building Inspection Division ((801) 963-3283).

Apply through West Valley City Building Inspection Division at 3600 S Constitution Boulevard, Suite 220, West Valley City, UT 84119. Phone: (801) 963-3283, email: building@wvc-ut.gov. Office hours: Monday–Thursday 7:00 AM – 6:00 PM. Official information: https://www.wvc-ut.gov/294/Building-Inspections.

West Valley City, Utah has adopted: 2021 International Residential Code (IRC) — adopted by West Valley City; 2021 IRC Chapter 11 (Energy Efficiency) per Utah State Amendments; confirmed in WVC Design Criteria effective April 18, 2026; 2024 International Building Code (IBC) — WVC Design Criteria effective April 18, 2026; consistent with Utah Code § 15A-2-103 effective July 1, 2026; 2024 International Fire Code (IFC) — WVC Design Criteria effective April 18, 2026; 2024 International Plumbing Code (IPC) — WVC Design Criteria effective April 18, 2026; 2024 International Mechanical Code (IMC) — WVC Design Criteria effective April 18, 2026; 2024 International Fuel Gas Code (IFGC) — WVC Design Criteria effective April 18, 2026; 2024 International Energy Conservation Code (IECC); ASHRAE Standard 90.1-2016 (commercial energy) — WVC Design Criteria effective April 18, 2026; 2023 National Electrical Code (NEC) — WVC Design Criteria effective April 18, 2026; Utah Code § 15A-2-103(1)(g); 2009 ICC A117.1 Accessibility Standard — WVC Design Criteria effective April 18, 2026; 2021 International Existing Building Code (IEBC) — adopted statewide per Utah Code § 15A-2-103; referenced in West Valley City Municipal Code Title 16 (Chapter 16-15). Local amendments apply — see the West Valley City overview page for the full list.

Utah state law allows a homeowner of a single-family residence to perform their own electrical work. You must still obtain a permit from WVC Building Inspections and schedule an inspection at (801) 963-3283.

Sources & verification

Verified against official sources. Last reviewed 2026-06-29.

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the West Valley City building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.

Other permits in West Valley City

Residential Building PermitEV Charger / EVSE PermitMechanical / HVAC PermitRoofing PermitSolar Panel PermitDeck PermitDemolition PermitBasement Finish PermitSwimming Pool PermitCommercial Building PermitSign PermitCommercial Tenant Improvement / Tenant Finish PermitFire Sprinkler & Fire Alarm PermitChange of Use / Certificate of Occupancy Permit

Electrical Permit in other cities

American Fork, UtahBountiful, UtahCedar City, UtahCenterville, UtahClearfield, UtahCoalville, UtahDraper, UtahFruit Heights, Utah

Compare electrical permit fees across Utah →

Look up this fee in a different city →

Embed this data card →

Related guides

Basement FinishSolar PanelsHot TubEV ChargerPlug-In SolarData CentersCommercial TI

Now live

Build your West Valley City project checklist

Describe your project once and get every permit, document, and fee it triggers in West Valley City — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.

Get started →