Sign Regulations (Zoning Code — No Standalone Sign Permit) — Columbine Valley, Colorado · Requirements sheet
Verified 2026-08-13 · Source: https://columbinevalley.org/wp-content/uploads/2021/02/2020-Zoning-Code-and-Land-Use-Regulations-11-17-2020.pdf
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
Sign Regulations (Zoning Code — No Standalone Sign Permit) in Columbine Valley, Colorado
Unlike peer small Colorado enclave town Bow Mar (which has NO sign ordinance anywhere in its municipal code), Columbine Valley DOES directly regulate signs in its own Zoning Code and Land Use Regulations (approved as Trustee Bill #6, Series 2020) — Article III (Special Regulations), Section 3 (General Provisions), Subsection F ('Signs'), read directly and in full 2026-08-13. The Town prohibits advertising signs, billboards, and 'unsightly objects or nuisances' town-wide except for five named, dimensionally-limited categories. However, there is no standalone 'Sign Permit' application, fee line item, or approval process anywhere on the Town's Building Permits, Other Permits, or Fee Schedule pages (checked directly 2026-08-13) — signs are regulated as a zoning use-restriction enforced under the Zoning Code's general violation/penalty mechanism (Article I, Sections 10-12), not issued as a distinct permit product with its own application or fee.
Verified 2026-08-13 · Source
When you need this permit
- 'For sale' signs: maximum 36" x 48", front yard only (not rear or side), removed within 10 days of closing (Art. III, Sec. 3.F.1)
- Political signs: maximum 36" x 48", front yard only, placed no earlier than 90 days before an election and removed no later than 10 days after, one sign per candidate or issue (Art. III, Sec. 3.F.2)
- Signs advertising a new subdivision, and construction-related signs generally, follow whatever is specified on the approved Final Development Plan rather than a town-wide standard (Art. III, Sec. 3.F.3)
- One builder/contractor sign per lot, maximum 24" x 36", naming the primary builder/contractor only, may be placed only AFTER the building permit has been approved; sub-contractor and other service signs are not allowed without prior Town Administrator approval; must be removed within 10 days after the certificate of occupancy is issued (Art. III, Sec. 3.F.4)
- Temporary celebratory signs (e.g., birthdays, anniversaries, academic or sports achievements): maximum 36" x 48" (Art. III, Sec. 3.F.5)
- Home occupations are categorically barred from any signage at all: Article III, Section 2.B.3 requires a home occupation to 'not display or create outside the building any external evidence of the operation ... no signs are permitted'
- Zone-district-specific variant found in the Equestrian Planned Development (EPD) district's own regulations (Art. II, Sec. 7.F, 'Signage'): one 'for sale' sign per VACANT lot, capped at a maximum sign surface area of 6 square feet AND a maximum height of 4 feet — narrower than the general 36"x48" (12 sq ft) town-wide 'for sale' sign standard; all other EPD signage defers to the general Art. III, Sec. 3.F standard
- No permit application, fee, or approval process is published for any of the above categories — compliance is a zoning-code obligation, not a permit-application step; garage-sale signage is separately regulated under Article III, Section 7 (erected and removed same-day as the sale)
Required documents
Check off what you have — your progress is saved on this device.
Fee schedule
Review timeline
Inspection process
See the full Columbine Valley inspection guide — scheduling & re-inspection fees →
Tips
- Columbine Valley is a genuine outlier among this corpus's small Colorado enclave towns for actually having real, specific, dimensioned sign rules (Art. III, Sec. 3.F) rather than a total sign-ordinance gap like neighboring Bow Mar — but don't expect a permit or fee to go with them; compliance is self-executing under the zoning code.
- The builder/contractor construction sign (24"x36" max) is the one sign category explicitly gated on an already-approved building permit — you cannot post it before the Town approves your Building Permit with Plan Review or Non-Structural Building Permit application, and sub-contractor signs need separate Town Administrator sign-off.
- If your lot sits in the Equestrian Planned Development (EPD) district, note its 'for sale' sign standard is stricter than the town-wide rule (6 sq ft / 4 ft max height vs. the general 36"x48" allowance) — confirm your zone district before posting a for-sale sign.
Frequently asked questions
Sources & verification
Verified against official sources. Last reviewed 2026-08-13.
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Columbine Valley building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Other permits in Columbine Valley
Sign Regulations (Zoning Code — No Standalone Sign Permit) in other cities
Compare sign regulations (zoning code — no standalone sign permit) fees across Colorado →
Look up this fee in a different city →
Now live
Build your Columbine Valley project checklist
Describe your project once and get every permit, document, and fee it triggers in Columbine Valley — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.
Get started →