Skip to main content
PermitBase

Electrical Permit (Non-Structural Building Permit / Building Permit with Plan Review) in Columbine Valley, Colorado

Columbine Valley does not publish a standalone Electrical Permit application; electrical service changes are processed under the Town's 'Non-Structural Building Permit' track, while electrical work bundled with structural remodels is processed under the 'Building Permit with Plan Review' track. The Town issues its own electrical permits and performs its own electrical inspections locally (does not defer permitting entirely to the Colorado State Electrical Board), though the Electrician contractor-license category itself carries no local license fee, consistent with electricians separately holding Colorado DORA state licensure.

Reviewed 2026-07-06 · Source

When you need this permit

  • Change to electrical service alone qualifies for the 'Non-Structural Building Permit' track
  • Electrical work that is part of a structural remodel or new construction project requires the 'Building Permit with Plan Review' track instead
  • Homeowners occupying their own property may perform electrical work without a contractor license, per the Town's FAQs, but must still obtain the applicable permit and meet code Contractor
  • Non-homeowner electrical contractors: the Town's Contractor License fee table lists an 'Electrician' category with no local license fee, implying reliance on separate Colorado State Electrical Board (DORA) licensure for the credential itself, while the Town still issues the local permit and schedules its own inspection Contractor
  • Governed by the 2023 NEC as adopted by the Town

Required documents

Check off what you have — your progress is saved on this device.

Not ready yet0 of 1 required documents checked.

This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29

Fee schedule

Building Permit Fee (valuation-tiered; no separate electrical-only fee table published)The Town does not publish a distinct electrical-fee valuation table (unlike some larger CO jurisdictions that use the CRS 12-23-117(3) state-anchored schedule) — electrical work is billed under the same general valuation-based Building Permit Fee schedule
$33 minimum, scaling per the Town's general Building Permit Fee Schedule
Inspection / Re-inspection Fee
$45 per inspection

Review timeline

Plan review
Not published — contact the department

How long did your Electrical Permit (Non-Structural Building Permit / Building Permit with Plan Review) permit actually take in Columbine Valley?

Anonymous — one question, no email. Answers are combined and only shown once at least 5 people have reported.

Inspection process

  1. 1

    Rough Electrical

    Wiring before concealment; electrical inspections specifically scheduled Monday, Wednesday, Thursday, Friday 3:30-5:00 p.m.

  2. 2

    Final Inspection

See the full Columbine Valley inspection guide — scheduling & re-inspection fees →

Tips

  • There is no standalone 'Electrical Permit' application on the Town's website — use the Non-Structural Building Permit for a standalone service change, or the Building Permit with Plan Review track if the electrical work is part of a larger remodel.
  • Electrical inspections run on a narrower weekly schedule (Mon/Wed/Thu/Fri afternoons only) than the Town's general inspection window — confirm this specific schedule when booking.

Frequently asked questions

Columbine Valley requires an electrical permit (non-structural building permit / building permit with plan review) for: Change to electrical service alone qualifies for the 'Non-Structural Building Permit' track; Electrical work that is part of a structural remodel or new construction project requires the 'Building Permit with Plan Review' track instead; Homeowners occupying their own property may perform electrical work without a contractor license, per the Town's FAQs, but must still obtain the applicable permit and meet code; Non-homeowner electrical contractors: the Town's Contractor License fee table lists an 'Electrician' category with no local license fee, implying reliance on separate Colorado State Electrical Board (DORA) licensure for the credential itself, while the Town still issues the local permit and schedules its own inspection; Governed by the 2023 NEC as adopted by the Town. If your project isn't listed, confirm with Town of Columbine Valley Building Department at 303-795-1434 before starting work.

In Columbine Valley, the published Building Permit Fee (valuation-tiered; no separate electrical-only fee table published) is: $33 minimum, scaling per the Town's general Building Permit Fee Schedule. Additional published fees: Inspection / Re-inspection Fee — $45 per inspection. These are the jurisdiction's own published figures — see the fee schedule table and source citations on this page.

Columbine Valley does not publish a plan-review timeline for this permit. Contact Town of Columbine Valley Building Department at 303-795-1434 for current turnaround.

You'll need: Non-Structural Building Permit Application (for standalone electrical service changes). Depending on your project, Columbine Valley may also ask for: Building Permit Application with Plan Review (if electrical work is part of a larger remodel). See the required-documents checklist on this page for details on each.

Columbine Valley requires 2 inspection(s) for an electrical permit (non-structural building permit / building permit with plan review), in order: Rough Electrical, Final Inspection. Schedule each through Town of Columbine Valley Building Department (303-795-1434).

Apply through Town of Columbine Valley Building Department at 2 Middlefield Road, Columbine Valley, CO 80123. Phone: 303-795-1434, email: bzapata-diaz@columbinevalley.org. Office hours: Monday through Friday, 8 a.m. to 1 p.m., or by appointment (Town Hall itself is open until 4 p.m.). Building Department Coordinator: Bonnie Zapata-Diaz. Inspection requests must be called in to 303-795-1434 between 8 a.m. and noon, Monday through Friday. Dispatch line (non-emergency): 303-795-4711.. Official information: https://columbinevalley.org/building-department/.

Columbine Valley, Colorado has adopted: 2024 International Building Code (IBC) — Town of Columbine Valley Building Codes page, current as of page last-modified date 2026-06-17; 2024 International Residential Code (IRC) — same page, adopted alongside the IBC; 2023 National Electrical Code (NEC) — same page; Note on code scope: the Town's live Building Codes page (columbinevalley.org/building-codes/) names ONLY the 2024 IBC, 2024 IRC, and 2023 NEC by edition; it does NOT separately name adopted editions of the IECC (energy code), IPC (plumbing code), IMC (mechanical code), IFGC (fuel gas code), IFC (fire code), or IEBC (existing building code) anywhere on that page, the Building Department page, the Building Permits page, or the Fee Schedule page — checked all directly. This is a materially thinner published code-adoption list than larger peer Colorado jurisdictions in this corpus (e.g. Vail names 9 separate model codes). It is plausible the IRC/IBC editions carry their own internal plumbing/mechanical/fuel-gas provisions by reference (both the IBC and IRC contain their own integrated plumbing/mechanical/fuel-gas chapters or cross-reference companion I-Codes), but the Town does not state this explicitly, so no separate IPC/IMC/IFGC edition is asserted here.; Third-party aggregator ColoradoEnergy.org's code database lists Columbine Valley under a stale 'IRC 2003 / NEC 2003' entry with no IECC data — this aggregator is out of date relative to the Town's own live, actively-maintained Building Codes page (dateModified 2026-06-17) and is NOT used as a source for this file's codesAdopted list, per this corpus's official-source-only policy.; HB22-1362 (Colorado Building Greenhouse Gas Emissions Reduction Act) note: this statute requires any Colorado local government that adopts or updates ANY building code between July 1, 2023 and July 1, 2026 to concurrently adopt the 2021 IECC (or equivalent) plus an Electric Ready and Solar Ready code. The Town's Building Codes page shows a dateModified of 2026-06-17 (within this window) and reflects an update from a prior code cycle to the 2024 IBC/IRC — however, the Town's own page does not mention IECC, Electric Ready, or Solar Ready adoption anywhere, and no separate ordinance or resolution documenting HB22-1362 compliance was found after searching the Town's website, Board of Trustees packets, and general web search. This is flagged as an open compliance question rather than assumed either way — the Town may be out of step with HB22-1362, may have adopted an energy code not documented on this particular webpage, or the page update may not itself constitute a triggering 'adoption or update' event under the statute's technical definition. Confidence on this specific point is partial; verify directly with the Building Department (303-795-1434) before relying on it for compliance purposes.. Local amendments apply — see the Columbine Valley overview page for the full list.

The Town issues its own local electrical permits and performs its own electrical inspections (scheduled Mon/Wed/Thu/Fri afternoons) rather than deferring entirely to the Colorado State Electrical Board. However, the Town's Contractor License fee schedule charges no local license fee for the Electrician category, consistent with electricians holding separate Colorado DORA state licensure for the credential itself. The Town's site does not make an explicit single statement resolving the full state/local split, so this is reported as partial confidence.

Sources & verification

Key facts verified against official sources. Last reviewed 2026-07-06.

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Columbine Valley building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.