Skip to main content
PermitBase

Residential Addition / Remodel Permit in Winter Park, Colorado

Required for additions and remodels to single-family homes, duplexes, and townhomes in Winter Park, administered by the joint Winter Park/Fraser/Granby Building Department under the same joint application and 2021 IRC/IBC-based Town Code amendments as new construction.

Verified 2026-07-06 · Source

When you need this permit

  • Same joint Building Permit Application (Towns of Winter Park, Fraser and Granby), with 'Alteration' or 'Addition' checked under Class of Work
  • All measurements GROSS square footage; valuation of alterations/repairs/remodels must reflect actual cost to owner (materials and labor)
  • Construction documents stamped by a licensed Colorado design professional required if structural work, non-conventional framing, or ground snow load over 70 psf is involved
  • Additions requiring new foundation work must comply with the same 30-inch frost depth and design-professional inspection requirements as new construction
  • Two-family (duplex) additions/remodels must maintain the required 2-hour fire-resistance-rated separation between units per Town Code 6-1-3 amending IRC R302.3
  • Electrical work on an addition/remodel still requires a SEPARATE permit filed directly with the Colorado State Electrical Board
  • Water/sewer utility plan documentation required if the scope changes fixture count or service demand

Required documents

Check off what you have — your progress is saved on this device.

Not ready yet0 of 3 required documents checked.

This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29

Fee schedule

Building Permit Fee (same valuation-based Table 1-11-2B as new construction)Town Code Title 1, Chapter 11
$54.00 minimum, scaling per the valuation tiers
Plan Review Fee
65% of the Building Permit Fee
Reinspection Fee
$47.00/hour (1-hour minimum)

Review timeline

Plan review
Not published — contact the department

How long did your Residential Addition / Remodel Permit permit actually take in Winter Park?

Anonymous — one question, no email. Answers are combined and only shown once at least 5 people have reported.

Inspection process

  1. 1

    Rough Framing (if structural)

  2. 2

    Rough Plumbing / Mechanical (if applicable to scope)

  3. 3

    Final Building Inspection

    Requires sales/use tax audit completion or waiver before certificate of occupancy/completion

See the full Winter Park inspection guide — scheduling & re-inspection fees →

Tips

  • A remodel that touches structural framing, foundations, or exceeds the 70 psf ground-snow-load threshold still triggers the same licensed-design-professional stamping requirement as new construction — don't assume a 'remodel' permit is automatically lower-scrutiny.
  • Electrical scope inside a remodel is still filed with the Colorado State Electrical Board, not this Building Division, even though the rest of the remodel goes through the joint department.

Frequently asked questions

Winter Park requires a residential addition / remodel permit for: Same joint Building Permit Application (Towns of Winter Park, Fraser and Granby), with 'Alteration' or 'Addition' checked under Class of Work; All measurements GROSS square footage; valuation of alterations/repairs/remodels must reflect actual cost to owner (materials and labor); Construction documents stamped by a licensed Colorado design professional required if structural work, non-conventional framing, or ground snow load over 70 psf is involved; Additions requiring new foundation work must comply with the same 30-inch frost depth and design-professional inspection requirements as new construction; Two-family (duplex) additions/remodels must maintain the required 2-hour fire-resistance-rated separation between units per Town Code 6-1-3 amending IRC R302.3; Electrical work on an addition/remodel still requires a SEPARATE permit filed directly with the Colorado State Electrical Board; Water/sewer utility plan documentation required if the scope changes fixture count or service demand. If your project isn't listed, confirm with Winter Park/Fraser/Granby Building Department (Town of Winter Park Community Development Department — Building Division) at (970) 726-8081 before starting work.

In Winter Park, the published Building Permit Fee (same valuation-based Table 1-11-2B as new construction) is: $54.00 minimum, scaling per the valuation tiers. Additional published fees: Plan Review Fee — 65% of the Building Permit Fee; Reinspection Fee — $47.00/hour (1-hour minimum). These are the jurisdiction's own published figures — see the fee schedule table and source citations on this page.

Winter Park does not publish a plan-review timeline for this permit. Contact Winter Park/Fraser/Granby Building Department (Town of Winter Park Community Development Department — Building Division) at (970) 726-8081 for current turnaround.

You'll need: Building Permit Application (Towns of Winter Park, Fraser and Granby); Construction Drawings (existing + proposed); Contractor Insurance Affidavit. See the required-documents checklist on this page for details on each.

Winter Park requires 3 inspection(s) for a residential addition / remodel permit, in order: Rough Framing (if structural), Rough Plumbing / Mechanical (if applicable to scope), Final Building Inspection. Schedule each through Winter Park/Fraser/Granby Building Department (Town of Winter Park Community Development Department — Building Division) ((970) 726-8081).

Apply through Winter Park/Fraser/Granby Building Department (Town of Winter Park Community Development Department — Building Division) at 50 Vasquez Road, Suite B, P.O. Box 3327, Winter Park, CO 80482. Phone: (970) 726-8081, email: permits@wpgov.com. Office hours: Monday-Friday, 8:00am-5:00pm. Official information: https://wpgov.com/our-government/departments/building/.

Winter Park, Colorado has adopted: 2021 International Building Code (IBC), as amended by Town Code Title 6, Chapter 1, Section 2 (6-1-2) — codified currently through Ord. 619, Series of 2024; 2021 International Residential Code (IRC), as amended by Town Code 6-1-3; International Plumbing Code, most current edition as adopted by the State of Colorado (per Town Code 6-1-1/6-1-4 cross-reference; the Town's own Codes Adopted by Reference section lists 'International Plumbing Code, 2021 Edition'); 2021 International Mechanical Code (IMC), as amended by Town Code 6-1-5; 2021 International Fuel Gas Code (IFGC); 2021 International Energy Conservation Code (IECC); 2021 International Fire Code (IFC), including all appendices; 2021 International Existing Building Code (IEBC), as amended by Town Code 6-1-9; National Electrical Code (NEC), 2020 Edition per the current Codes Adopted by Reference list, though Town Code 6-1-10 states the Town concurrently adopts whatever edition the State of Colorado has most recently adopted — electrical permitting itself is administered by the Colorado State Electrical Board, not the local Building Division (see localAmendments); 2023 Colorado Electric Ready and Solar Ready Code, as amended by Town Code 6-1-11 (Ord. 619, Series of 2024); 2025 Colorado Wildfire Resiliency Code — statutorily mandated statewide for jurisdictions with mapped Wildland-Urban Interface (WUI) area, adoption required by April 1, 2026 and full compliance by July 1, 2026 per the Colorado Division of Fire Prevention and Control; the Town's own website (wpgov.com Building Division page) carries a 'Wildfire Resiliency Code Update' notice confirming the Town is subject to this new statewide code, but the Town had not yet published its own locally-amended code text/section numbers for this specific code as of the date of this extraction — see localAmendments for what is and is not yet verifiable; Full adopted code text (Town Code Title 6, Chapter 1) hosted at codelibrary.amlegal.com/codes/winterparkco/latest/winterpark_co/0-0-0-2239. Local amendments apply — see the Winter Park overview page for the full list.

Yes — Town Code 6-1-3 (amending IRC R302.3) requires dwelling units in a two-family (duplex) building to be separated by wall/floor assemblies rated at not less than 2 hours, regardless of whether a lot line exists between the units, and this applies to remodels that disturb the separation assembly.

Sources & verification

Verified against official sources. Last reviewed 2026-07-06.

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Winter Park building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.