Skip to main content
PermitBase

Dillon building inspections

Verified

Inspection sequence, scheduling, and re-inspection fees for building permits in Dillon, Colorado.

Verified 2026-07-06 · Source

How to schedule

Inspections are requested through the building department below.

Address
County Commons, 0037 Peak One Drive, Frisco, CO 80443
Phone
(970) 668-3170
Office hours
Generally Monday-Friday 8:00 a.m.-5:00 p.m. (Wednesdays 10:00 a.m.-5:00 p.m. — the department is typically unavailable Wednesday mornings until 10:30 a.m. for a weekly staff meeting); Chief Building Official: Glen Morgan

Published scheduling rules

  • Building inspections can be scheduled online via eTRAKiT once your permit is issued. (Building Permit (New Construction / Foundation, Framing, Finish))
  • This is a genuinely separate permit from anything the Town of Dillon or Summit County Building Inspection Department issues — Summit Fire & EMS District runs its own online AccessGov application, its own fee schedule, and its own inspection scheduling line, (970) 262-5215. (Fire Sprinkler and Fire Alarm System Permit (Summit Fire & EMS District))
  • Cancelling a scheduled inspection within 24 hours, or an incomplete inspection, can trigger a re-inspection fee — confirm your system is truly ready before booking. (Fire Sprinkler and Fire Alarm System Permit (Summit Fire & EMS District))
  • Inspections must be requested at least two business days in advance by calling (970) 262-5215 or using the District's online inspection-request tool; each permitted contractor must request inspections for that contractor's own scope of work (Fire Sprinkler and Fire Alarm System Permit (Summit Fire & EMS District))
  • Incomplete inspections and cancellations within 24 hours of a scheduled inspection may incur a re-inspection fee (Fire Sprinkler and Fire Alarm System Permit (Summit Fire & EMS District))

Inspection sequence

Applies to: Building Permit (New Construction / Foundation, Framing, Finish)

  1. 1

    Foundation / Footings

    Before concrete pour

  2. 2

    Framing

    After framing complete, before insulation or wall cover

  3. 3

    MEP Rough-In

    Mechanical, electrical, and plumbing rough-in before walls closed

  4. 4

    Final

    All work complete, ready for Certificate of Occupancy

Applies to: Commercial Building Permit (including Tenant Improvement / Tenant Finish)

  1. 1

    Foundation / Footings

    Before concrete pour (new construction)

  2. 2

    Framing

    After framing complete, before insulation or wall cover

  3. 3

    MEP Rough-In

    Mechanical, electrical, and plumbing rough-in before walls closed

  4. 4

    Final

    All work complete per approved plans, ready for Certificate of Occupancy

Applies to: Building Permit — Addition, Remodel, Deck, Guard Replacement

  1. 1

    Framing

    After framing complete, before wall cover

  2. 2

    MEP Rough-In

    If mechanical, electrical, or plumbing work is part of the scope

  3. 3

    Final

    All work complete per approved plans

Applies to: Plumbing Permit

  1. 1

    Underground / Under-slab

    Before concrete pour — pipe slope, materials, cleanouts

  2. 2

    Rough-In

    After pipes installed, before walls closed

  3. 3

    Final

    All fixtures connected, no leaks, proper venting verified

Applies to: Electrical Permit

  1. 1

    Rough-In

    Wiring and conduit installed before walls closed

  2. 2

    Final

    All devices installed, panel labeled, system energized

Applies to: EV Charger / EVSE Permit (Standard Electrical Permit)

  1. 1

    Rough-In

    Wiring and conduit installed before walls closed (if applicable)

  2. 2

    Final

    Charger circuit/unit installed, breaker sized correctly, energized

Applies to: Fire Sprinkler and Fire Alarm System Permit (Summit Fire & EMS District)

  1. 1

    Rough-In Inspection

    Piping (sprinkler) or wiring/devices (alarm) visible and in place before concealment; each permitted contractor must request inspection of their own scope

  2. 2

    Final Inspection (Sprinkler and Alarm, coordinated)

    Fire sprinkler and fire alarm final inspections must be coordinated and scheduled for the same time per the District's own Permits page; certification letters required before final approval

Applies to: Mechanical Permit

  1. 1

    Rough-In / Equipment

    Equipment installation and ductwork before walls closed

  2. 2

    Final

    Equipment operational, combustion air and venting verified

Applies to: Photovoltaic (Solar) Permit

  1. 1

    Rough Electrical

    Conduit runs, wire sizing, disconnect placement before cover

  2. 2

    Final

    Panel mounting, racking attachment, roof penetration sealing, and all electrical connections verified

Final inspection only: Demolition Permit

Re-inspection fees

Electrical PermitReinspection · Summit County Building Permit Fee Schedule, Electrical Permit Fees — All Other Fees valuation table (“Reinspection on all above”)
$65.00
Fire Sprinkler and Fire Alarm System Permit (Summit Fire & EMS District)Required additional/re-inspections · Resolution 2024-06, Section II.15
$200.00 for the first two hours (minimum), $75.00 for each additional hour or portion thereof

Sources & verification

Verified against official sources. Last reviewed 2026-07-06.

Online permit portal

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Dillon building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.

Dillon building permits

Get alerts for Dillon

We'll email you when Dillon's fees, documents, or codes change — not often.

We only use your email to send permit updates. No spam, unsubscribe anytime. Privacy.