Skip to main content
PermitBase

EV Charger / EVSE Permit in Kuna, Idaho

Electric vehicle charging equipment (EVSE) installation in Kuna is an electrical installation, permitted through the City of Kuna Building Department's Electrical Program under the same Electrical Permit Application and Resolution R74-2023A fee schedule used for all other electrical work. The fee schedule has no distinct EV-charger/EVSE line item — a Level 2 EVSE circuit added to an existing residence is billed under the schedule's 'Existing Residence' branch-circuit tier, one installed with new construction falls under the New Single Family Dwelling square-footage tier, and a standalone commercial charging station is billed under the same 'Commercial/Industrial/Solar' contract-value tier used for solar and other commercial electrical work.

Verified 2026-07-20 · Source

When you need this permit

  • Electrical permit required before commencing EVSE/EV charger installation work
  • Submit Electrical Permit Application (PDF) to the Building Department
  • Licensed Idaho electrical contractor required for electrical work not performed by the homeowner on their own primary residence
  • No distinct EV-charger/EVSE fee line exists on the City's Electrical Program fee schedule (Resolution R74-2023A) — a residential charger circuit is billed under the 'Existing Residence' ($65 + $10 per additional branch circuit) or 'New Single Family Dwelling' tiers depending on whether it accompanies new construction; a commercial/standalone charging station is billed under the 'Commercial/Industrial/Solar' contract-value tier

Required documents

Check off what you have — your progress is saved on this device.

Not ready yet — 0 of 1 required documents checked.

This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29 →

Fee schedule

EVSE circuit added to Existing ResidenceResolution R74-2023A — no distinct EV-charger line item is published; this is the applicable 'Existing Residence' branch-circuit tier
$65 + $10 per additional branch circuit
EVSE circuit included in New Single Family DwellingResolution R74-2023A — applies when the charger circuit is installed as part of new home construction
$130 (up to 1,500 sq ft) to $325 + $65 per additional 1,000 sq ft (over 4,500 sq ft)
Standalone/commercial EV charging station (Commercial/Industrial/Solar tier)Resolution R74-2023A — same tiered fee category used for commercial, industrial, and solar electrical work
Contract value ≤$10,000: $60 + (value × 0.02); $10,001-$100,000: $260 + ((value − $10,000) × 0.01); >$100,000: $1,160 + ((value − $100,000) × 0.005)
Re-inspection FeeResolution R57-2021
$65 each (after each failed attempt)

Review timeline

Plan reviewTypical estimate — confirm current times with the Kuna building department
~3–10 business days

How long did your EV Charger / EVSE Permit permit actually take in Kuna?

Anonymous — one question, no email. Answers are combined and only shown once at least 5 people have reported.

Inspection process

  1. 1

    Rough-In Electrical

    Inspection of rough-in wiring/circuit before walls are closed, where applicable

  2. 2

    Final Electrical

    Final inspection of the completed EVSE circuit and breaker/disconnect per NEC Article 625

See the full Kuna inspection guide — scheduling & re-inspection fees →

Tips

  • Kuna prices a standalone commercial EV charging station the same way it prices solar and other commercial/industrial electrical work — a percentage of contract value, not a flat fee.
  • A residential Level 2 charger circuit is typically billed as an additional branch circuit under the 'Existing Residence' tier ($65 + $10/circuit) rather than the Commercial/Industrial/Solar tier, since it is not itself a commercial installation.
  • Homeowners may perform EVSE wiring on their own primary residence but must obtain the permit and perform the work themselves. Owner-builder

Frequently asked questions

Kuna requires an ev charger / evse permit for: Electrical permit required before commencing EVSE/EV charger installation work; Submit Electrical Permit Application (PDF) to the Building Department; Licensed Idaho electrical contractor required for electrical work not performed by the homeowner on their own primary residence; No distinct EV-charger/EVSE fee line exists on the City's Electrical Program fee schedule (Resolution R74-2023A) — a residential charger circuit is billed under the 'Existing Residence' ($65 + $10 per additional branch circuit) or 'New Single Family Dwelling' tiers depending on whether it accompanies new construction; a commercial/standalone charging station is billed under the 'Commercial/Industrial/Solar' contract-value tier. If your project isn't listed, confirm with City of Kuna Building Department at (208) 922-5546 before starting work.

There is no separate EV-charger fee line on the City's Electrical Program fee schedule. A charger circuit added to an existing home is billed under the 'Existing Residence' tier ($65 + $10 per additional branch circuit); one installed with new construction falls under the New Single Family Dwelling square-footage tier; a standalone commercial charging station uses the same contract-value-based 'Commercial/Industrial/Solar' tier as solar installations.

Plan review for an ev charger / evse permit in Kuna typically runs 3–10 business days. This is an estimate, not a published figure — confirm current review times with City of Kuna Building Department at (208) 922-5546.

You'll need: Electrical Permit Application (PDF). See the required-documents checklist on this page for details on each.

Kuna requires 2 inspection(s) for an ev charger / evse permit, in order: Rough-In Electrical, Final Electrical. Schedule each through City of Kuna Building Department ((208) 922-5546).

Apply through City of Kuna Building Department at 751 W. 4th Street, P.O. Box 13, Kuna, ID 83634. Phone: (208) 922-5546, email: BuildingPermits@KunaID.gov. Office hours: Mon–Fri 8:00 AM – 5:00 PM; inspection requests must be submitted prior to 4:00 PM for next business day. Official information: https://kunacity.id.gov/119/Building-Department.

Kuna, Idaho has adopted: 2018 International Building Code (IBC) — adopted statewide per Idaho Building Code Act; 2018 International Residential Code (IRC, Parts I, II, III and IX) — adopted statewide; 2018 International Energy Conservation Code (IECC) — adopted statewide; 2018 International Existing Building Code (IEBC) — adopted statewide; 2018 International Mechanical Code (IMC) — adopted statewide; 2018 International Fuel Gas Code (IFGC) — adopted statewide; 2023 National Electrical Code (NEC/NFPA 70) — adopted via Idaho Electrical Board; 2017 Idaho State Plumbing Code (ISPC) — based on 2015 Uniform Plumbing Code; 2018 International Fire Code (IFC) — administered by Idaho Fire Marshal. Local amendments apply — see the Kuna overview page for the full list.

Sources & verification

Verified against official sources. Last reviewed 2026-07-20.

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Kuna building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.

Other permits in Kuna

Residential Building PermitCommercial Building PermitMechanical / HVAC PermitElectrical PermitSolar Photovoltaic (PV) PermitPlumbing PermitDemolition Permit

EV Charger / EVSE Permit in other cities

American Falls, IdahoAmmon, IdahoBlackfoot, IdahoBoise, IdahoBuhl, IdahoBurley, IdahoCaldwell, IdahoCascade, Idaho

Compare ev charger / evse permit fees across Idaho →

Look up this fee in a different city →

Embed this data card →

Related guides

EV Charger

Now live

Build your Kuna project checklist

Describe your project once and get every permit, document, and fee it triggers in Kuna — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.

Get started →