Fire Alarm System Permit — Kanab, Utah · Requirements sheet
Reviewed 2026-07-21 · Source: https://kanab.utah.gov/2152/Building-Department
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
Fire Alarm System Permit in Kanab, Utah
Kanab does not publish a distinct city-level fire alarm system permit or fee. A direct check of the 2024 and July 2025 Kanab City Adopted Consolidated Fee Schedules, the Kanab City Fire Department page, and the Kanab City Business License Application found only a generic 'Residential Fire Inspection' ($50.00 flat) and 'Commercial Fire Inspection' ($50.00/hr) line item tied to business-licensing/occupancy fire inspections — not an alarm-specific plan review or installation permit. Fire alarm and detection system installation, as electrical/construction work regulated by the city's adopted 2023 NEC and 2024 IBC, is expected to route through the same general Building Permit and CityInspect process documented elsewhere in this file. Separately, and independent of Kanab's own fee schedule, the Utah State Fire Marshal's Office (SFMO) operates a real statewide fire-alarm plan-review program under the Utah Fire Prevention and Safety Act (Utah Code Title 53, Chapter 7): its official 'Fire Alarm Plan Review Submittal Form,' fetched and confirmed directly 2026-07-21, charges a minimum $75.00 fee calculated at square footage x $0.022 — identical in structure to the SFMO's sprinkler plan-review fee. Under Utah Code §53-7-104, a city's own fire officers (here, the Kanab City Fire Department) enforce the state fire code within their own area, while the SFMO's direct enforcement authority is generally limited to areas outside corporate cities, state-owned/school/institutional occupancies, or jurisdictions that request SFMO review — whether Kanab's Fire Department retains its own alarm plan-review capacity or routes plans to the SFMO was not confirmed in any Kanab-specific published document as of 2026-07-21.
Reviewed 2026-07-21 · Source
When you need this permit
- Installation, modification, or extension of a fire alarm and detection system in a building within Kanab city limits
- Compliance with the city-adopted 2023 NEC (electrical) and 2024 IBC (fire-protection-system requirements) and, where applicable, NFPA 72 alarm standards referenced by the Utah State Fire Marshal's Office
- Complete Building Permit application (see documents) submitted via the CityInspect online portal
- Fire inspection compliance under the city's business-licensing fire-code requirements (Kanab City Business License Application, Part D) where the alarm system serves a licensed business
Required documents
Check off what you have — your progress is saved on this device.
Not ready yet — 0 of 1 required documents checked.
This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29 →
Fee schedule
Review timeline
Inspection process
- 1
Scheduled Inspection (Fire Alarm / Fire Protection System)
Inspections require at least 24 hours' notice and are scheduled within 3 business days after the request is received. Scheduled by calling the Building Department at 435-644-2534.
- 2
Fire Inspection (Business License / Occupancy)
A Kanab City Fire Department inspection encompassing fire protection systems among other items may be required before a business license is issued for the space served by the alarm system, per the Business License Application, Part D. Scheduled by calling the Fire Department at 435-644-2534.
See the full Kanab inspection guide — scheduling & re-inspection fees →
Tips
- Kanab has no distinct fire alarm permit or fee — the 2024 and July 2025 Adopted Consolidated Fee Schedules were fetched and searched directly (2026-07-21) and contain no alarm-specific line item, only the general 'Commercial Fire Inspection' ($50.00/hr) and 'Residential Fire Inspection' ($50.00 flat) tied to business licensing.
- The Utah State Fire Marshal's Office charges a real, separate $75.00-minimum plan-review fee (square footage x $0.022) for fire alarm plans submitted to its office — identical in structure to its sprinkler plan-review fee, and independent of anything Kanab itself charges. Confirm with the Kanab City Fire Department (435-644-2718) whether a specific project's alarm plans need to go to the SFMO or are reviewed locally.
- Under Utah Code §53-7-104, local fire officers (Kanab City Fire Department) enforce the state fire code within Kanab; the State Fire Marshal's direct enforcement is generally limited to areas outside corporate cities, state/school/institutional occupancies, or by local request — so SFMO involvement in an ordinary Kanab commercial alarm install is not automatic and was not confirmed either way for this jurisdiction.
Frequently asked questions
Sources & verification
Key facts verified against official sources. Last reviewed 2026-07-21.
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Kanab building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Other permits in Kanab
Fire Alarm System Permit in other cities
Compare fire alarm system permit fees across Utah →
Look up this fee in a different city →
Now live
Build your Kanab project checklist
Describe your project once and get every permit, document, and fee it triggers in Kanab — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.
Get started →