Skip to main content
PermitBase

Fire Alarm System Permit in Plain City, Utah

Plain City has no distinct fire-alarm-specific permit application, portal, or fee schedule — no fire-alarm permit, checklist, or dollar fee is published anywhere on plaincityutah.gov, including the Building Department page, the Forms & Applications page, Consolidated Fee Schedule Resolution #2024-07, and Plain City Code Title 4, Chapter 1, Fire Department. As with fire sprinkler systems, the underlying legal requirement is real: fire alarm and detection systems are regulated under the statewide-adopted 2024 International Fire Code (Utah Code §15A-5-103) and IBC Chapter 9 (Fire Protection Systems), and Utah's statewide IFC amendment at §15A-5-202(1)(c) requires that 'fire alarm system layout shall be prepared and submitted by a person certified by the National Institute for Certification in Engineering Technologies [NICET] at level III or IV in Fire Alarm Systems.' Because Plain City has no separate fire-permit intake, a fire alarm installation is submitted through the same Online Building Permit Portal used for the general Building Permit, Solar PV Permit, and EV Charger Permit, with its fee governed — as with the Solar PV Permit entry — by Municipal Code §9-1-4's adoption of 1997 UBC Table 1-A.

Verified 2026-07-22 · Source

When you need this permit

  • Installation, alteration, or extension of a fire alarm and detection system, regulated as part of the current statewide-adopted IBC (Chapter 9, Fire Protection Systems) and the statewide State Fire Code (2024 International Fire Code, adopted per Utah Code §15A-5-103)
  • Submitted as a Building Permit Application via Plain City's Online Building Permit Portal (plaincity_permit.portal.iworq.net) — no separate fire-alarm-specific permit application is published by Plain City
  • Fire alarm system layout must be prepared and submitted by a person certified by the National Institute for Certification in Engineering Technologies (NICET) at Level III or IV in Fire Alarm Systems, per the statewide IFC amendment at Utah Code §15A-5-202(1)(c)
  • Estimated project valuation (cost of materials and labor) provided on the Building Permit Application, since Plain City's building-permit fee under Municipal Code §9-1-4 is valuation-based

Required documents

Check off what you have — your progress is saved on this device.

Not ready yet — 0 of 2 required documents checked.

This checker covers one permit. A full project usually triggers several — our checklist will assemble all of them, free →

Fee schedule

Building Permit Fee (fire alarm system, valuation-based — 1997 UBC Table 1-A)
No fire-alarm-specific fee line item appears anywhere on plaincityutah.gov — neither in the Consolidated Fee Schedule (Resolution #2024-07, Exhibit A, revision 06/06/2024) nor on the Forms & Applications page. Show full citationNo fire-alarm-specific fee line item appears anywhere on plaincityutah.gov — neither in the Consolidated Fee Schedule (Resolution #2024-07, Exhibit A, revision 06/06/2024) nor on the Forms & Applications page. As established for the Solar PV Permit entry, Plain City Municipal Code §9-1-4, 'FEE SCHEDULE' (amd. Ord. 2025-08, 6-19-2025), adopts 1997 UBC Table 1-A as the governing valuation-based fee table for 'fees authorized in the IBC for inspections, permits, certificates and other purposes'. Since fire alarm systems are an IBC Chapter 9 (Fire Protection Systems) requirement and Plain City routes this work through the same general Building Permit Application/portal used for solar and EV work (no separate fire-permit intake exists), that is the applicable fee mechanism. Weber Fire District — which publishes its own distinct, itemized Fire Alarm System plan-review and permit fee schedule (scaled by building square footage) for the several Weber County cities it serves — does not serve Plain City, per its own About Us/member-city listing, so that fee schedule does not apply here and is not used to fill this gap. Contact the Building Department at (801) 731-4908 with the project's estimated valuation for a calculated figure.
Valuation-based per Table 1-A of the 1997 Uniform Building Code — not a fixed dollar figure. Example brackets: $1-$500 valuation = $23.50; $501-$2,000 = $23.50 + $3.05 per additional $100 (or fraction) up to $2,000; $2,001-$25,000 = $69.25 + $14.00 per additional $1,000 (or fraction) up to $25,000; $25,001-$50,000 = $391.75 + $10.10 per additional $1,000 up to $50,000; $50,001-$100,000 = $643.75 + $7.00 per additional $1,000 up to $100,000; $100,001-$500,000 = $993.75 + $5.60 per additional $1,000 up to $500,000; over $500,000 scales further per the same table.

Review timeline

Plan review
Not published — contact the department

How long did your Fire Alarm System Permit permit actually take in Plain City?

Anonymous — one question, no email. Answers are combined and only shown once at least 5 people have reported.

Inspection process

  1. 1

    Power-To-Panel / Electrical

    Plain City's Required Inspections list (Doc 483) contains no dedicated fire-alarm-specific inspection item; a fire alarm system's wiring/panel connection would be verified as part of this general electrical inspection, done when circuits are complete enough to function once energized, with all grounding systems in place.

  2. 2

    Final

    Done when all items are complete and the structure is ready to be occupied, per the Required Inspections list — no personal items may be in the structure until occupancy is issued.

See the full Plain City inspection guide — scheduling & re-inspection fees →

Tips

  • Plain City has no distinct fire alarm permit, application, or fee — install work is submitted as a standard Building Permit Application through the same Online Building Permit Portal used for other construction work.
  • Utah's statewide State Fire Code amendment (Utah Code §15A-5-202(1)(c)) requires that fire alarm system layouts be prepared and submitted by a NICET Level III or IV (Fire Alarm Systems) certified person — have this documentation ready regardless of which city processes the permit.
  • Plain City is NOT a member of the Weber Fire District (which serves Farr West, Hooper, Huntsville, Marriott-Slaterville, West Haven, and Uintah) — Plain City runs its own independent Fire Department, so Weber Fire District's published fire-alarm plan-review/permit fee schedule does not apply here.
  • Plain City's Commercial Business License Application (Doc 383) includes a 'Fire Marshall' sign-off line alongside the Building Inspector's, as part of its Site-Plan-then-License approval chain — this is a business-licensing sign-off, not a substitute for, or evidence of, a separate fire alarm construction permit or fee.
  • No fire-alarm-specific inspection is separately published in Plain City's Required Inspections list (Doc 483) — alarm panel wiring is verified through the same general Power-To-Panel/Electrical and Final inspections used for other electrical work.

Frequently asked questions

Plain City requires a fire alarm system permit for: Installation, alteration, or extension of a fire alarm and detection system, regulated as part of the current statewide-adopted IBC (Chapter 9, Fire Protection Systems) and the statewide State Fire Code (2024 International Fire Code, adopted per Utah Code §15A-5-103); Submitted as a Building Permit Application via Plain City's Online Building Permit Portal (plaincity_permit.portal.iworq.net) — no separate fire-alarm-specific permit application is published by Plain City; Fire alarm system layout must be prepared and submitted by a person certified by the National Institute for Certification in Engineering Technologies (NICET) at Level III or IV in Fire Alarm Systems, per the statewide IFC amendment at Utah Code §15A-5-202(1)(c); Estimated project valuation (cost of materials and labor) provided on the Building Permit Application, since Plain City's building-permit fee under Municipal Code §9-1-4 is valuation-based. If your project isn't listed, confirm with Plain City Building Department at (801) 731-4908 before starting work.

There's no distinct fire-alarm-specific fee published. Plain City Municipal Code §9-1-4 adopts 1997 UBC Table 1-A as the valuation-based fee governing IBC-authorized building permits, which is the applicable mechanism since fire alarm work is submitted as a Building Permit. Contact the Building Department at (801) 731-4908 with your project's estimated valuation.

Plain City does not publish a plan-review timeline for this permit. Contact Plain City Building Department at (801) 731-4908 for current turnaround.

You'll need: Building Permit Application (Online Building Permit Portal); NICET-Certified Fire Alarm System Layout. See the required-documents checklist on this page for details on each.

Plain City requires 2 inspection(s) for a fire alarm system permit, in order: Power-To-Panel / Electrical, Final. Schedule each through Plain City Building Department ((801) 731-4908).

Apply through Plain City Building Department at 4160 W 2200 N, Plain City, UT 84404. Phone: (801) 731-4908. Office hours: Mon–Thurs 8:00 AM – 5:00 PM; Fri 8:00 AM – 12:00 PM noon; closed Saturday and Sunday. Official information: https://www.plaincityutah.gov/1268/Building.

Plain City, Utah has adopted: International Building Code (IBC) — adopted per Plain City Code § 9-1-1(A) pursuant to Utah Code Annotated § 58-56-4(2) and Utah Administrative Code R156-56-701, as modified by chapter 11 of the supplement to the IBC promulgated by the International Code Council, and amended per statewide amendments in Utah Administrative Code R156-56-704 (automatically updated per § 9-1-1(C) whenever the Division of Occupational and Professional Licensing/Uniform Building Code Commission adopts new statewide amendments). Per Utah Code § 15A-2-103, the statewide-adopted edition is the 2024 IBC (including Appendices C and J), which took effect July 1, 2026 and supersedes the prior 2021 IBC edition (effective July 1, 2023 through June 30, 2026) — Plain City's automatic-adoption clause carries this forward without any local ordinance action required.; International Residential Code (IRC) — adopted by reference within IBC standards per Plain City Code § 9-1-1(A) ('...together with standards incorporated into the IBC by reference, including...the international residential code (IRC) promulgated by the International Code Council'). The statewide-adopted edition is the 2021 IRC per Utah Code § 15A-2-103; the 2026-07-01 statewide IBC transition to the 2024 edition did NOT carry the IRC forward, so 2021 remains current.; International Energy Conservation Code (IECC) — adopted by reference within IBC standards per Plain City Code § 9-1-1(A). Utah Code § 15A-2-103(1)(h) specifies the current statewide-adopted edition as the 2024 IECC. Plain City's Residential Building Permit Plan Submittal Requirements (Doc 475) additionally requires a REScheck energy analysis report showing compliance with the model energy code, passing by a minimum of 3% if using the Utah Energy Conservation Method.; Statewide plumbing, mechanical, and electrical codes (IPC/IMC/NEC) apply uniformly across Utah municipalities under the State Construction Code (Utah Code Title 15A), and Plain City's own municipal code does not separately codify them. Plain City's plan submittal checklists (Docs 475, Accessory Building Doc) require electrical, plumbing, and mechanical plans as part of the IRC-governed construction drawings, consistent with statewide adoption rather than a distinct local ordinance.. Local amendments apply — see the Plain City overview page for the full list.

No. Plain City publishes no distinct fire-alarm permit application, checklist, or fee. It is submitted as a standard Building Permit Application through the city's Online Building Permit Portal, with the layout prepared by a NICET Level III/IV (Fire Alarm Systems) certified person as required by Utah's statewide Fire Code amendments.

Sources & verification

Verified against official sources. Last reviewed 2026-07-22.

Fee schedules

Applications & forms

Codes & ordinances

Department & other records

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Plain City building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.

Property Access

Plain City's permit history is searchable by address

2,206 permits on record for Plain City, 2018–2026 — searchable by street address, with permit type, status, issued date and valuation where the city publishes them.

Start your 7-day free trial7 days free for new customers, then $79/mo · the guide above stays free

Other permits in Plain City

Residential Building PermitDetached Accessory Dwelling Unit (DADU) PermitCommercial Building PermitCommercial Tenant Improvement / Tenant Finish PermitSign PermitSolar PV Installation PermitEV Charger / EVSE PermitFire Sprinkler System PermitChange of Use / Certificate of Occupancy Permit

Fire Alarm System Permit in other cities

Alpine, UtahAmerican Fork, UtahBountiful, UtahBrigham City, UtahCedar City, UtahCedar Hills, UtahCenterville, UtahClearfield, Utah

Compare fire alarm system permit fees across Utah →

Look up this fee in a different city →

Embed this data card →

Now live

Build your Plain City project checklist

Describe your project once and get every permit, document, and fee it triggers in Plain City — in one checklist. Free, for any city and any number of projects.

Get started →