Prescott Valley building inspections

Applies to: Residential Building Permit (New Construction)

1. 1

   Foundation/Footing

   Before concrete pour

2. 2

   Framing

   Structural framing, connections, egress, per 2018 IRC and Town Design Criteria

3. 3

   Rough-In (Electrical/Plumbing/Mechanical)

   Before walls are closed

4. 4

   Final

   All work complete per approved plans; scheduled via the Town's IVR inspection line (928-759-3060)

Applies to: Plumbing Permit

1. 1

   Underground/Slab

   Before concrete pour — verify pipe slope, materials, cleanouts, burial depth

2. 2

   Rough-In

   After pipes installed, before walls closed

3. 3

   Final

   Fixtures, water heater, and gas connections verified, no leaks; scheduled via IVR inspection line

Applies to: Residential Addition / Remodel / Accessory Structure Permit

1. 1

   Foundation/Footing

   Required before concrete pour for additions and accessory structures

2. 2

   Framing

   Structural connections to existing structure

3. 3

   Final

   Completed work verified against approved plans

Applies to: Change of Use / Certificate of Occupancy

1. 1

   Building Official Inspection for Certificate of Occupancy

   Town Code Sec. 7-01-190.C: after the building official inspects the building or structure and finds no violations of the administrative code or other laws enforced by the Town, the building official issues a certificate of occupancy stating the occupancy classification, construction type, design occupant load, and whether a provided automatic sprinkler system is required

2. 2

   Trade rough-in and final inspections for any associated Tenant Improvement work

   Where the change of use involves construction, the underlying Commercial Tenant Improvement permit's electrical, plumbing and mechanical rough-in inspections and final inspection apply; inspections are scheduled through the Town's IVR line, 928-759-3060

Applies to: Commercial Tenant Improvement (T.I.) Permit

1. 1

   Rough-In (Electrical / Plumbing / Mechanical, as applicable)

   Applicable trade rough-in inspections before concealment, scoped to the T.I. work performed

2. 2

   Final / Certificate of Occupancy

   All work complete per approved plans; Certificate of Occupancy issued once Building, Public Works, Engineering, and Planning and Zoning requirements are met

Applies to: Demolition Permit

1. 1

   Pre-Demolition (case-by-case)

   Some projects require an inspection scheduled BEFORE demolition work begins, per the Town's Demolition Application process instructions

2. 2

   Final

   Verifies site condition and completion of demolition per the approved permit; project is not complete without an approved final inspection

Applies to: Electrical Permit

1. 1

   Rough-In

   Wiring, box placement, and panel connections before walls are closed

2. 2

   Final

   Devices installed, panel labeled, protections verified per 2017 NEC; scheduled via IVR inspection line

Applies to: EV Charger / EVSE Permit

1. 1

   Rough-In

   EVSE circuit wiring, box placement, and panel connections before walls are closed

2. 2

   Final

   Charger installed, panel labeled, protections verified per 2017 NEC; scheduled via IVR inspection line

Applies to: Fence and Retaining Wall Permit

1. 1

   Footing

   Required for engineered retaining walls before backfill

2. 2

   Final

   Completed fence/wall verified against approved plans; required for commercial fences over 6 feet

Applies to: Fire Sprinkler and Fire Alarm System Permit

1. 1

   Fire protection system inspections (bundled into the permit fee)

   CAFMA states that fire protection system and special event permit fees include three (3) inspections for a commercial fire sprinkler system, two (2) inspections for a fire alarm, and three (3) inspections for a residential fire sprinkler system. CAFMA does not publish the individual inspection stage names, so none are asserted here.

2. 2

   Reinspection (fee applies)

   A $125 per-inspection reinspection fee applies for a failed inspection, failure to install per plans, failure to pretest the fire protection system, or a no show (CAFMA Fee Schedule, Miscellaneous Fees)

Applies to: Mechanical / HVAC Permit

1. 1

   Rough-In

   Ductwork and equipment placement before walls closed

2. 2

   Final

   Equipment operational, clearances and combustion air verified; scheduled via IVR inspection line

Applies to: Residential Solar Photovoltaic (PV) Permit

1. 1

   Rough Electrical

   Conduit runs, wire sizing, disconnect placement before energizing

2. 2

   Final

   Panel mounting, racking attachment, roof penetration sealing, electrical connections, and interconnection point verified

Final inspection only: Re-Roofing Permit, Sign Permit