Sign Permit — Bennett, Colorado · Requirements sheet
Verified 2026-08-13 · Source: https://library.municode.com/co/bennett/codes/municipal_code?nodeId=CH16LAUSDE_ARTIIISIRE
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
Sign Permit in Bennett, Colorado
Required before erecting or installing most permanent and temporary signs in Bennett, under Municipal Code Chapter 16, Article III (Sign Regulations, Sec. 16-3-10 through 16-3-460; current version dated April 2, 2026), with the fee set by the June 24, 2026 Schedule of Fees. Bennett's sign code is detailed and currently operative: it has its own permit-approval process, an extensive exempt-sign list, dimensional standards tables by zoning district, and a published fee. Check the exempt list before assuming your sign needs a permit.
Verified 2026-08-13 · Source
When you need this permit
- A sign permit is required prior to the erection or installation of any permitted permanent or temporary sign, except signs exempt under Sec. 16-3-350 (Sec. 16-3-310(a))
- Applications are submitted per the Town's Applicant Guide; the Zoning Administrator reviews the application against the approval criteria in Article III and either approves, approves with conditions, or denies it (Sec. 16-3-320(a)-(c))
- A sign permit lapses and has no further effect unless the sign is erected in compliance with its terms within six (6) months of permit approval (Sec. 16-3-320(e))
- A building permit is additionally required where needed to verify the structural integrity of the sign type requested (Sec. 16-3-310(e))
- A separate revocable permit (with its own approval criteria, including a revocable-permit agreement and Town Engineer sign-off) is required whenever a sign is proposed on public property or within a public right-of-way (Sec. 16-3-310(c), 16-3-320(d))
- Sign number, maximum area, and maximum height are capped by zoning district under Sec. 16-3-410: Table 3.1 for the RE, R-1, R-2, R-3, and MH residential districts (e.g., monument signs 32 sq ft/6 ft, site signs 16 sq ft/6 ft, wall signs on a home-based business 2 sq ft/8 ft), and Table 3.2 for the C, EC, I-1, I-2, and P nonresidential districts (e.g., monument signs 75-150 sq ft depending on frontage/development type, roof signs up to 100 sq ft, wall signs up to 100 sq ft per building facade)
- Pole signs are the most tightly restricted nonresidential sign type: permitted only on a lot proximate to the I-70/State Highway 79 interchange, within a corridor no wider than 1,500 feet north/south or 3,000 feet east/west of that intersection, up to 380 sq ft and 60 ft in height, and no closer than 1,000 lineal feet to an existing pole sign (Sec. 16-3-420(7))
- Numerous common sign types are exempt from needing a sign permit entirely under Sec. 16-3-350, subject to the conditions stated there — including flags meeting height/setback limits, one building-wall banner per business (up to 100 sq ft) plus two freestanding wave banners, government/utility warning signs, most window signs, address signs (up to 2 per building, 6 sq ft each), temporary holiday decorations, one portable A-frame sign per business (max 6 sq ft/4 ft tall), yard/site/swing/notification signs, works of art, one inflatable sign per nonresidential property, external accessory-use signs up to 40 sq ft aggregate, and vehicular signs meeting specific conditions
- Certain sign types are prohibited outright under Sec. 16-3-360 regardless of permit status, including off-premises signs/billboards not otherwise expressly permitted, roof-projecting signs unless approved as a roof sign, revolving/rotating signs, flashing or intermittent lighting, and signs attached to trees or other plant material
Required documents
Check off what you have — your progress is saved on this device.
Not ready yet — 0 of 2 required documents checked.
This checker covers one permit. A full project usually triggers several — our checklist will assemble all of them, free →
Fee schedule
June 24, 2026 Schedule of Fees, Section 5, A) Permits, item 13 — listed as a separate recurring line item from the Sign Permit fee itself. Show full citationHide
June 24, 2026 Schedule of Fees, Section 5, A) Permits, item 13 — listed as a separate recurring line item from the Sign Permit fee itself. Municipal Code Sec. 16-3-350(2) separately allows one wall banner per business (up to 100 sq ft) and two freestanding wave banners without a sign PERMIT; this fee schedule line appears to be a distinct recurring banner-display charge rather than the sign-permit fee — confirm applicability and interaction with the exemption directly with the Building Department before assuming which (if either) applies to a given banner.Review timeline
Inspection process
- 1
Structural/Building Inspection (if applicable)
Required only where a building permit was also necessary under Sec. 16-3-310(e) to verify the structural integrity of the specific sign type requested
See the full Bennett inspection guide — scheduling & re-inspection fees →
Tips
- Bennett's sign code is unusually detailed for a town this size — it sets separate maximum number/area/height tables for residential versus nonresidential zoning districts (Sec. 16-3-410, Tables 3.1 and 3.2), plus additional type-specific design rules for awning, canopy, monument, pole, projecting, roof, wall, and site signs at Sec. 16-3-420.
- Check the exempt-sign list (Sec. 16-3-350) before assuming you need a permit at all — flags, one 100-sq-ft wall banner per business, one portable A-frame sign per business, yard/site/swing signs, address signs, and holiday decorations are among the sign types the Town allows without a sign permit, provided the listed conditions are met.
- Pole signs are geographically restricted to a narrow corridor around the I-70/SH79 interchange and cannot be placed within 1,000 feet of an existing pole sign — this sign type is not a general option Town-wide the way monument or wall signs are.
- The $75.00 minimum Sign Permit fee is higher than the Town's general $23.50 Building Permit minimum — confirm with the Building Department whether your sign's actual valuation would push the fee above that floor.
Frequently asked questions
Sources & verification
Verified against official sources. Last reviewed 2026-08-13.
Fee schedules
Codes & ordinances
Department & other records
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Bennett building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Bennett's permit history isn't searchable here yet
This page covers what the permit requires. What we don't have for Bennett yet is the record of permits actually issued — the history you'd search by street address. That is a gap in our coverage, not a statement about any particular property.
Your email, and the place — never an address. We only use it to tell you when Bennett lands. Privacy.
Other permits in Bennett
Sign Permit in other cities
Compare sign permit fees across Colorado →
Look up this fee in a different city →
Now live
Build your Bennett project checklist
Describe your project once and get every permit, document, and fee it triggers in Bennett — in one checklist. Free, for any city and any number of projects.
Get started →