EV Charger / EVSE Permit — Hayden, Idaho · Requirements sheet
Verified 2026-07-20 · Source: https://dbs.idaho.gov/
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
EV Charger / EVSE Permit in Hayden, Idaho
Hayden has no dedicated EV charger or EVSE permit and no distinct fee line item for electric vehicle charging equipment. Electrical permits within Hayden city limits are NOT issued by the City -- the City's own Residential Permit Application Instructions direct applicants to the State of Idaho Division of Building Safety (DOPL) for electrical permits and inspections. An EV charger circuit is not a power-generation or energy-storage system, so it does not require a City structural/building permit. On the DOPL Contractor Electrical Permit Worksheet, EV charger circuits fall under the general 'Other Installations including Commercial/Industrial/Solar/Renewable Energy' valuation-based fee formula (the same formula used for solar, just without the Solar/Renewable Energy checkbox), since no dedicated EV/EVSE line item exists on the state form.
Verified 2026-07-20 · Source
When you need this permit
- No City of Hayden building permit is required for a standard EV charger installation -- only electrical work is involved
- Electrical permit issued by the State of Idaho Division of Building Safety (DOPL), NOT the City of Hayden -- apply online at dbs.idaho.gov or by phone at (800) 955-3044
- On the DOPL worksheet, EV charger circuits fall under 'OTHER INSTALLATIONS including COMMERCIAL/INDUSTRIAL/SOLAR/RENEWABLE ENERGY' -- this category 'shall apply to any and all electrical installations not specifically mentioned elsewhere on this form,' and EV/EVSE circuits have no dedicated line item, so they fall under this catch-all
- Do NOT check the 'Solar, Renewable Energy, power generation, power production, or energy storage systems' box on the DOPL worksheet for a straight EV charger install -- the fee formula is identical either way
- Governed by the National Electrical Code (NEC) as adopted statewide by the Idaho Electrical Board (Idaho Code Title 54, Chapter 10)
Required documents
Check off what you have — your progress is saved on this device.
Not ready yet — 0 of 1 required documents checked.
This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29 →
Fee schedule
Review timeline
Inspection process
- 1
State Electrical Inspection (DOPL-inspected)
Performed by a State of Idaho DOPL inspector; charger circuit, disconnect, and GFCI/load-management compliance verified before energizing
See the full Hayden inspection guide — scheduling & re-inspection fees →
Tips
- Do not attempt to apply for an EV charger's electrical permit through the City of Hayden's BS&A Online portal -- it is not issued there. Apply through DOPL at dbs.idaho.gov or (800) 955-3044.
- Hayden has no EV-specific permit or fee -- a home or business EV charger install is just a standard State of Idaho DOPL electrical permit, priced under the general 'Other Installations' valuation formula.
Frequently asked questions
Sources & verification
Verified against official sources. Last reviewed 2026-07-20.
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Hayden building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Other permits in Hayden
EV Charger / EVSE Permit in other cities
Compare ev charger / evse permit fees across Idaho →
Look up this fee in a different city →
Related guides
Now live
Build your Hayden project checklist
Describe your project once and get every permit, document, and fee it triggers in Hayden — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.
Get started →