Skip to main content
PermitBase

EV Charger / EVSE Permit in Hobbs, New Mexico

Hobbs has no dedicated EV charger or EVSE permit and no distinct fee line item for electric vehicle charging equipment. A retrofit EV charger circuit is billed as standard electrical work under the City's amperage-based Electrical Permit fee schedule (Municode 15.28.090) -- the same schedule used for the interconnection portion of the sibling solar-pv-permit entry. Separately, the statewide 2021 New Mexico Residential Energy Conservation Code (14.6.6 NMAC, effective 7/30/2024, enforced by Hobbs as an NMAC-code-enforcing jurisdiction) requires NEW single-family homes to be built with a dedicated 50-amp/240V EV-ready circuit and outlet, and the 2021 New Mexico Commercial Energy Conservation Code (14.7.9 NMAC) requires new commercial buildings to provision EV charging capacity for 1-5% of parking spaces depending on use -- these are new-construction wiring-capacity mandates, not a separate retrofit EV charger permit or fee.

Verified 2026-07-20 · Source

When you need this permit

  • Electrical Permit Application (City of Hobbs) required for EV charger circuit installation, billed under the amperage-based fee schedule (Municode 15.28.090) -- no dedicated EV/EVSE fee line exists
  • New single-family homes must be built with a dedicated 50-amp/240V circuit and outlet capable of EV charging, per the 2021 New Mexico Residential Energy Conservation Code (14.6.6 NMAC), effective statewide 7/30/2024
  • New commercial buildings must provision EV charging infrastructure for 1-5% of parking spaces depending on building use, per the 2021 New Mexico Commercial Energy Conservation Code (14.7.9 NMAC)
  • Electrical work must be performed and permitted by a CID-licensed electrician (EE-98, EL-1, or ER-1), per N.M. Admin. Code 14.5.2.8 Contractor

Required documents

Check off what you have — your progress is saved on this device.

Not ready yet — 0 of 1 required documents checked.

This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29 →

Fee schedule

Residential Electrical -- by service amperage (applies to EV charger circuit work)City of Hobbs Code of Ordinances Section 15.28.090 -- no separately itemized EV-specific electrical fee line was located; an EV charger circuit is billed on the same amperage-based schedule as any other electrical service work, the same mechanism already documented for the solar-pv-permit's interconnection portion
$52.00 (0-100 amp) / $83.00 (101-200 amp) / $115.00 (201-320 amp) / $260.00 (321-400 amp) / $415.00 (over 400 amp)
Re-inspection FeeMunicode 15.28.070; must be paid before the next inspection
$60.00

Review timeline

Plan reviewTypical estimate — confirm current times with the Hobbs building department
~0–1 business days

How long did your EV Charger / EVSE Permit permit actually take in Hobbs?

Anonymous — one question, no email. Answers are combined and only shown once at least 5 people have reported.

Inspection process

  1. 1

    Final Electrical

    Charger circuit, disconnect, and GFCI/load-management compliance verified per the 2020 New Mexico Electrical Code (NMAC 14.10.4) before energizing

See the full Hobbs inspection guide — scheduling & re-inspection fees →

Tips

  • Hobbs does not have an EV-specific permit fee -- an EV charger circuit is billed on the same amperage-based Electrical Permit schedule (Municode 15.28.090) used for any other service/circuit work.
  • If you're building a new single-family home in Hobbs, the 2021 New Mexico Residential Energy Conservation Code already requires a 50-amp/240V EV-ready circuit and outlet be roughed in -- confirm this is included in your electrical plan rather than treating it as an optional add-on later.
  • New commercial construction in Hobbs must provision EV charging capacity for a percentage of parking spaces under the 2021 New Mexico Commercial Energy Conservation Code (14.7.9 NMAC) -- factor this into site/electrical plans for new commercial permits.

Frequently asked questions

Hobbs requires an ev charger / evse permit for: Electrical Permit Application (City of Hobbs) required for EV charger circuit installation, billed under the amperage-based fee schedule (Municode 15.28.090) -- no dedicated EV/EVSE fee line exists; New single-family homes must be built with a dedicated 50-amp/240V circuit and outlet capable of EV charging, per the 2021 New Mexico Residential Energy Conservation Code (14.6.6 NMAC), effective statewide 7/30/2024; New commercial buildings must provision EV charging infrastructure for 1-5% of parking spaces depending on building use, per the 2021 New Mexico Commercial Energy Conservation Code (14.7.9 NMAC); Electrical work must be performed and permitted by a CID-licensed electrician (EE-98, EL-1, or ER-1), per N.M. Admin. Code 14.5.2.8. If your project isn't listed, confirm with City of Hobbs Building Inspection Department (Planning & Engineering / Community Development) at (575) 391-8158 before starting work.

No. Hobbs has no dedicated EV/EVSE permit or fee line item. An EV charger circuit is billed under the City's standard amperage-based Electrical Permit fee schedule (Municode 15.28.090), the same schedule used for any other electrical service work. Separately, statewide New Mexico energy codes require new homes and commercial buildings to be EV-ready at construction, but that is a wiring-capacity mandate, not a distinct retrofit permit fee.

Plan review for an ev charger / evse permit in Hobbs typically runs 0–1 business days. This is an estimate, not a published figure — confirm current review times with City of Hobbs Building Inspection Department (Planning & Engineering / Community Development) at (575) 391-8158.

You'll need: Electrical Permit Application (Fillable, City of Hobbs). See the required-documents checklist on this page for details on each.

Hobbs requires 1 inspection(s) for an ev charger / evse permit, in order: Final Electrical. Schedule each through City of Hobbs Building Inspection Department (Planning & Engineering / Community Development) ((575) 391-8158).

Apply through City of Hobbs Building Inspection Department (Planning & Engineering / Community Development) at 200 E. Broadway, Hobbs, NM 88240. Phone: (575) 391-8158, email: hobbs.permits@hobbsnm.org. Office hours: City Hall: Monday-Thursday 8:00 AM - 6:00 PM, Friday 8:00 AM - 12:00 PM (noon). Official information: https://www.hobbsnm.org/building_services.html.

Hobbs, New Mexico has adopted: New Mexico is a statewide-code state administered by the Construction Industries Division (CID) of the Regulation and Licensing Department (RLD) under the Construction Industries Licensing Act (CILA), NMSA 1978 Sections 60-13-3 and 60-13-45. City of Hobbs Municode Section 15.04.010 formally adopts by reference NMAC Articles 14.7.2 and 14.7.3 (New Mexico Commercial Building Code and Residential Building Code) as the City's Building Codes; NMAC 14.10.4 (New Mexico Electrical Code / National Electrical Code) as the City's Electrical Code; and NMAC 14.8.2, 14.9.2, 14.9.6, and 14.8.3 (New Mexico Plumbing Code, Mechanical Code, Solar Energy Code, and Swimming Pool/Spa/Hot Tub Code) as the City's Plumbing and Mechanical Codes. Hobbs is NOT a separately state-certified 'Local Enforcement Agency' with its own amended code body (unlike Albuquerque, Santa Fe, Las Cruces, or Rio Rancho) — it enforces the CID/NMAC-adopted statewide code set locally through its own Building Inspection Department (Municode 15.04.020), acting as the Authority Having Jurisdiction (AHJ) for permit issuance and inspection within city limits and its 5-mile Extra-Territorial Jurisdiction (ETJ), per NMAC 14.5.2.8.; 2021 New Mexico Commercial Building Code (NMCBC, NMAC 14.7.2) — based on the 2021 IBC; 2021 New Mexico Residential Building Code (NMRBC, NMAC 14.7.3) — based on the 2021 IRC; 2021 International Fire Code; 2021 International Existing Building Code; 2012 Solar Energy Code (IAPMO), NMAC 14.9.6; 2021 New Mexico Energy Conservation Code (Commercial and Residential); ICC/ANSI A117.1-2017 (Accessible and Usable Buildings and Facilities); 2021 New Mexico Plumbing and Mechanical Code (NMAC 14.8.2, 14.9.2); 2021 Uniform Mechanical Code (IAPMO); 2021 Uniform Plumbing Code (IAPMO); 2012 Uniform Swimming Pool, Spa and Hot Tub Code (NMAC 14.8.3); 2020 New Mexico Electrical Code / 2020 National Electrical Code (NMAC 14.10.4); 2012 National Electrical Safety Code; Liquefied Petroleum Gas Standards, NMAC 19.15.40; 2020 NFPA 58; 2012 NFPA 57 (incorporated into NFPA 52 (2005)); 2021 NFPA 54 (National Fuel Gas Code); 2011 NFPA 52 (Vehicle Gaseous Fuel Systems Code); 2021 NFPA 1192 (Standard on Recreational Vehicles). Local amendments apply — see the Hobbs overview page for the full list.

Sources & verification

Verified against official sources. Last reviewed 2026-07-20.

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Hobbs building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.

Other permits in Hobbs

Residential Building Permit (New Construction)Residential Electrical PermitResidential Plumbing PermitResidential Mechanical / HVAC PermitResidential Re-Roof PermitResidential Solar Photovoltaic (PV) PermitSign PermitFire Sprinkler & Fire Alarm System PermitChange of Occupancy / Certificate of Occupancy

EV Charger / EVSE Permit in other cities

Alamogordo, New MexicoAlbuquerque, New MexicoArtesia, New MexicoAztec, New MexicoBernalillo, New MexicoBloomfield, New MexicoCarlsbad, New MexicoClovis, New Mexico

Compare ev charger / evse permit fees across New Mexico →

Look up this fee in a different city →

Embed this data card →

Related guides

EV Charger

Now live

Build your Hobbs project checklist

Describe your project once and get every permit, document, and fee it triggers in Hobbs — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.

Get started →