Electrical Permit — Bloomfield, New Mexico · Requirements sheet
Verified 2026-07-18 · Source: https://www.sjcounty.net/government/community-development/building-department
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
Electrical Permit in Bloomfield, New Mexico
Required for electrical installations, service changes, and related work on residential, commercial, and mobile-home structures within Bloomfield. Issued and inspected by the San Juan County Building Division under the 2020 New Mexico Electrical Code (based on the 2020 NEC).
Verified 2026-07-18 · Source
When you need this permit
- Permit required for permanent service, temporary service, mobile home service, feeder/branch circuits, solar PV systems, swimming pool/wind generator equipment, and communication systems — per San Juan County's Electrical Permit Application (revised 04/11/2023)
- Must comply with the 2020 New Mexico Electrical Code (2020 NEC as amended)
- New Mexico's homeowner permit exemption (14.5.2 NMAC) allows a homeowner to pull an electrical permit for their own primary residence, provided the homeowner performs the major portion of the work
- Only a New Mexico-licensed electrical contractor (or exempt homeowner) may perform and permit the work
Required documents
Check off what you have — your progress is saved on this device.
Not ready yet — 0 of 1 required documents checked.
This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29 →
Fee schedule
Review timeline
Inspection process
- 1
Electrical Under Slab
Raceway runs prior to covering trench (new construction).
- 2
Rough Electrical
Service, feeders, and branch circuits complete to termination.
- 3
Electrical Final
Panel board labeled, cover plate on, switches/outlets connected, fixtures in place.
See the full Bloomfield inspection guide — scheduling & re-inspection fees →
Tips
- Inspections require a minimum 24-hour advance request by calling (505) 334-4313.
- A reinspection fee of $75.00 applies if work fails inspection or is not ready when the inspector arrives.
- Solar PV electrical permits are billed by kW rather than a flat fee — $25/kW for the first 160kW, then $5/kW beyond that.
Frequently asked questions
Sources & verification
Verified against official sources. Last reviewed 2026-07-18.
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Bloomfield building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Other permits in Bloomfield
Electrical Permit in other cities
Compare electrical permit fees across New Mexico →
Look up this fee in a different city →
Related guides
Now live
Build your Bloomfield project checklist
Describe your project once and get every permit, document, and fee it triggers in Bloomfield — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.
Get started →