Fire Alarm System Permit / Plan Review — Highland, Utah · Requirements sheet
Reviewed 2026-07-21 · Source: https://www.highlandut.gov/142/Fire-Emergency-Medical-Services
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
Fire Alarm System Permit / Plan Review in Highland, Utah
Highland City does not publish a distinct fire alarm permit fee — a full-text review of the FY2026 Comprehensive Fee Schedule (22 pages, adopted 5/5/26) found no 'fire alarm' fee line item; a fire alarm system is filed and reviewed as part of the underlying Building Permit Application, billed at the same ICC valuation-based Permit Fee/Plan Check Fee used for the rest of the project. Fire code enforcement for Highland is provided by Lone Peak Fire District (part of the Lone Peak Public Safety District, also serving Alpine), per Highland's own official Fire, Rescue, and Emergency Medical Services page: 'Highland City contracts with the Lone Peak Fire District to provide fire protection and EMS services to the residents of Highland.' A direct check of Lone Peak Fire District's own website (lonepeakfire.com, checked 2026-07-21) found no published fire alarm permit application, fee schedule, or plan-review guidance of any kind. The Utah State Fire Marshal's Office separately publishes a statewide Fire Alarm Plan Review Submittal Form with its own published fee ($75 minimum, or $0.022 per square foot of review scope, whichever is greater, confirmed by direct read of the form 2026-07-21) — cited here as the best available grounded fee reference in the absence of any Lone Peak-published figure — but the State Fire Marshal's own enforcement jurisdiction under Utah Code § 53-7-104(3) is limited to areas outside corporate cities/fire districts, state/school property, and certain institutional occupancies (or by request of the local fire official), so it is not certain this state-level fee is what Lone Peak Fire District actually charges for an ordinary fire alarm system in Highland. Applicants should confirm directly with Lone Peak Fire District (801-763-5365) which review path and fee apply to a specific project.
Reviewed 2026-07-21 · Source
When you need this permit
- Installation of a fire alarm system in a building located in Highland City, where required by the adopted fire/building code for the occupancy or use
- Fire alarm system plans filed and reviewed as part of the underlying Building Permit Application (My City Inspector portal) — Highland does not publish a standalone fire-alarm-permit application separate from the Building Permit
- Submittal must include a floor plan showing room size/use, occupancy type, project code analysis, alarm-initiating/notification device locations, alarm control/trouble signaling equipment, annunciation, power connection, battery calculations, conductor type/sizes, voltage drop calculations, manufacturer cut sheets, and ceiling height/construction details, per the Utah State Fire Marshal's Fire Alarm Plan Review Submittal Form
Required documents
Check off what you have — your progress is saved on this device.
Not ready yet — 0 of 2 required documents checked.
This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29 →
Fee schedule
Review timeline
Inspection process
- 1
Fire Alarm Inspection and Testing
Inspection and acceptance testing of the installed system per NFPA 72 (2022 Edition), adopted by Utah Administrative Rule R710-11, 'Standards for inspecting and testing fire alarm systems.'
See the full Highland inspection guide — scheduling & re-inspection fees →
Tips
- Lone Peak Fire District, not Highland City's own Building Division, is the fire authority for Highland — per Highland's official Fire, Rescue, and EMS page, 'Highland City contracts with the Lone Peak Fire District to provide fire protection and EMS services.' Confirm fire alarm plan review and fees directly with Lone Peak Fire District (5582 Parkway West Drive, Highland, UT 84003; 801-763-5365) before assuming a specific fee applies.
- The Utah State Fire Marshal's submittal checklist requires extensive documentation (voltage drop calculations, battery calculations, device locations, cut sheets, etc.) — assemble this package before submitting, regardless of which fire authority ultimately reviews the plans.
- This fire alarm review is separate from, and in addition to, Highland's own Residential, Commercial, or Commercial Tenant Improvement Building Permit process for the same project.
Frequently asked questions
Sources & verification
Key facts verified against official sources. Last reviewed 2026-07-21.
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Highland building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Other permits in Highland
Fire Alarm System Permit / Plan Review in other cities
Compare fire alarm system permit / plan review fees across Utah →
Look up this fee in a different city →
Now live
Build your Highland project checklist
Describe your project once and get every permit, document, and fee it triggers in Highland — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.
Get started →