Manufactured Home / Factory-Built Building (FBB) Installation Permit in Springerville, Arizona

Springerville requires a manufactured home / factory-built building (fbb) installation permit for: Manufactured Home Installation Permit Application required, listing owner, installation address/parcel, unit manufacturer/serial number/date of manufacture/size, installer information, accessory installer information (if applicable), and dealer name; Utility checkboxes required: Water, Sewer/Septic, Gas, Electric; Accessory structure checkboxes: Awning, Garages, Porch, Skirting/Retaining, Cooler or AC System, Approved Plan #, Flood Zone Plan #, Others; All licensed subcontractors (electrical, plumbing, gas, mechanical, accessory structure) must be listed on the Subcontractor Supplement Form; Utility Testing Report Form required, documenting Water Test (24 CFR 3280.612), Sewer Test (3280.612), Gas Test (3280.705), and Electrical Test (3280.810(b)), per installer/dealer/HUD number; Permit expires 6 months from date of issuance; Minimum 2 inspections required, one of which is reserved for accessory structures if applicable; additional inspections billed hourly; Permit must be displayed in the front window for inspection; It is the responsibility of the owner, dealer, or installer/contractor to call for all required inspections and reinspections; Certificate of Occupancy sent upon request; Larger/commercial Factory Built-Building installations use a separate, State-issued application directly through the Arizona Department of Fire, Building and Life Safety, Office of Manufactured Housing (1110 West Washington, Suite 100, Phoenix, AZ 85007), which also determines Permanent (installed more than 6 months) vs Temporary (leased, 6 months or less) status and any fire sprinkler/alarm system requirements. If your project isn't listed, confirm with Town of Springerville Planning & Zoning Department — Building Department at 928-333-2656 ext. 227 (Building Department); 928-333-2656 (Planning & Zoning main line); fax 928-333-5598 before starting work.

In Springerville, the published Mandatory Inspections (minimum 2, one reserved for accessory structures) is: $94.00 each (per the Manufactured Home Installation Permit Application form itself). Additional published fees: Additional Inspections — $47.00 per hour; Mobile/Manufactured Home Permit Fee — $700.00; FBB-Residential (per story) — $650.00; FBB-Commercial (LF per story) — $7.00; FBB-Classroom (LF per story) — $4.00; FBB-Special Use (includes one inspection) — $370.00; Application Submittal & Review — $700.00. These are the jurisdiction's own published figures — see the fee schedule table and source citations on this page.

Not published as a distinct figure. The Town's own Manufactured Home Installation Permit Application states only a 6-month permit expiration and a minimum of 2 required inspections ($94 each, additional inspections at $47/hour) — no plan-review turnaround time is stated. This is a confirmed gap in the Town's published materials; contact the Building Department (928-333-2656 ext. 227) directly for current processing expectations.

You'll need: Manufactured Home Installation Permit Application; Utility Testing Report Form. Depending on your project, Springerville may also ask for: Subcontractor Supplement Form; Factory Built-Building Installation Permit Application (State). See the required-documents checklist on this page for details on each.

Springerville requires 2 inspection(s) for a manufactured home / factory-built building (fbb) installation permit, in order: Installation Inspection (minimum 2 required), Accessory Structure Inspection. Schedule each through Town of Springerville Planning & Zoning Department — Building Department (928-333-2656 ext. 227 (Building Department); 928-333-2656 (Planning & Zoning main line); fax 928-333-5598).

Apply through Town of Springerville Planning & Zoning Department — Building Department at 418 E. Main St., Springerville, AZ 85938. Phone: 928-333-2656 ext. 227 (Building Department); 928-333-2656 (Planning & Zoning main line); fax 928-333-5598, email: Publicly listed on the Town's Building Department page as an obfuscated/masked address; no plain-text department email address was recoverable from the live site. Contact by phone at 928-333-2656 ext. 227, or via the Town's online contact form at springervilleaz.gov/contact-us.. Office hours: Not published on the Town's Building Department page as of the last verification (no explicit hours-of-operation statement was found on the Building Department, Community Development, or Contact Us pages). Applicants must contact the Building Department a minimum of twenty-four (24) hours in advance to schedule an inspection, per the Town's own permit application forms.. Official information: https://www.springervilleaz.gov/building-department.

Springerville, Arizona has adopted: Arizona has NO statewide mandatory building code floor for general construction — code adoption is a per-city/county authority under state enabling statutes (e.g., A.R.S. Title 9 for municipalities). The Town of Springerville runs its own Planning & Zoning Department / Building Department and independently adopts and administers its own construction codes and fee schedule; it does NOT defer building permitting to Apache County or to the neighboring Town of Eagar — Springerville's own permit applications, fee schedule, and Municipal Code sections (e.g., Chapter 17.28 Walls and Fences, Chapter 17.88 Plan Review) are self-contained and administered entirely by Springerville's own Planning & Zoning/Building staff. This is confirmed independently from Springerville's own primary sources, not inferred from the Eagar precedent.; 2015 edition of the International Residential Code (IRC), as adopted by the Town of Springerville. Source: Town of Springerville 'Building Health and Safety' reference document (springervilleaz.gov, Building Department Forms), restated verbatim on multiple Town permit application checklists (Manufactured Home, Shed/Storage, Plan/Design Review).; 2015 International Building Code (IBC), as adopted by the Town of Springerville for commercial/non-residential construction. Source: Town of Springerville 'Building Health and Safety' reference document.; 2015 International Fire Code (IFC), as adopted by the Town of Springerville as its uniform fire code. Source: Town of Springerville 'Building Health and Safety' reference document.; 2015 International Mechanical Code (IMC), as adopted by the Town of Springerville. Source: Town of Springerville 'Building Health and Safety' reference document.; 2015 International Plumbing Code (IPC), as adopted by the Town of Springerville. Source: Town of Springerville 'Building Health and Safety' reference document.; 2015 International Green Building Code (IgCC), as adopted by the Town of Springerville. Source: Town of Springerville 'Building Health and Safety' reference document.; 2014 National Electrical Code (NEC), as adopted by the Town of Springerville (electrical code cycle predates the 2015 ICC set). Source: Town of Springerville 'Building Health and Safety' reference document.; Manufactured homes, mobile homes, and factory-built buildings (FBB) are regulated directly by the State of Arizona (Arizona Department of Fire, Building and Life Safety, Office of Manufactured Housing, 1110 West Washington, Suite 100, Phoenix, AZ 85007) for construction/installation standards, including HUD federal preemption under 24 CFR §3280 (construction) and §3285 (installation, non-preemptive — local jurisdictions MAY set stricter local snow-load/installation standards per the Department's own May 24, 2010 clarification letter); the Town of Springerville issues a separate local Manufactured Home Installation Permit for site installation, utility connections, accessory structures, and inspections. Source: Town of Springerville Manufactured Home Installation Permit Application (Department of Fire, Building and Life Safety letterhead) and Arizona Department of Fire, Building and Life Safety letter re: Design Roof Load Zone 'South' in Arizona (May 24, 2010).; Flood Hazards: the National Flood Insurance Program (NFIP) as adopted by the Town Council of Springerville on 10/2/2007, administered by the Apache County Engineer. Source: Town of Springerville 'Building Health and Safety' / Climate and Geographic Design reference document.; The specific adopted code edition years above are sourced directly from the Town's own (non-Municode) 'Building Health and Safety' reference PDF, a primary town-published source, with identical text appearing on at least three separate Town permit-application PDFs (Manufactured Home, Shed/Storage, and the standalone Building Health and Safety document). The Town's Code of Ordinances is hosted on Municode Library (library.municode.com/az/springerville).. Local amendments apply — see the Springerville overview page for the full list.

Construction standards are set federally by HUD under 24 CFR §3280, which designates all of Arizona as Design Roof Load Zone 'South' (a 20 psf roof load floor) and preempts any stricter state/local construction requirement. However, installation standards under 24 CFR §3285 are not federally preempted, so the Town of Springerville may (and does, via its own permit and inspection process) impose additional local installation requirements.