Camp Verde building inspections

Applies to: Residential Building Permit (New Single-Family Home)

1. 1

   Foundation/Footing

   Before concrete pour

2. 2

   Framing

   Structural framing, connections, egress, per 2024 IRC and Town of Camp Verde design criteria

3. 3

   Rough Electrical/Plumbing/Mechanical

   Prior to wall closure

4. 4

   Final / Certificate of Occupancy

   All work complete per approved plans; scheduled 48 hours in advance per the Building Division's published process flow chart

Applies to: Manufactured / Modular / Factory-Built Home Installation Permit

1. 1

   Set / Foundation

   Foundation and blocking/pier placement verification

2. 2

   Tie-Down

   Anchoring and tie-down system per OMH/manufacturer standards

3. 3

   Final

   Utility connections and site completion; three inspections total are included in the base OMH fee

Applies to: Residential Addition / Remodel / Accessory Structure Permit

1. 1

   Foundation/Footing

   Required before concrete pour for additions/accessory structures with foundations

2. 2

   Framing

   Structural connections to existing structure

3. 3

   Final

   Completed work verified against approved plans

Applies to: Change of Use / Certificate of Occupancy (processed via Commercial Tenant Improvement Permit)

1. 1

   Rough Electrical/Plumbing/Mechanical

   Where the change-of-use scope involves trade work, prior to wall closure

2. 2

   Final / Certificate of Occupancy

   Terminal step of the building permit process per the Building Division flow chart ('Certificate of Occupancy or Completion'); no separate fee for a standard final CO

Applies to: EV Charger / EVSE Permit

1. 1

   Rough-In

   Circuit wiring before covering, where applicable

2. 2

   Final

   EVSE connection operational and verified per adopted code

Applies to: Fire Protection Systems Permit — Fire Alarm / Fire Sprinkler / Kitchen Hood Suppression / Above-Ground Storage Tank

1. 1

   Rough-In

   Fire alarm wiring/devices or sprinkler piping before covering, per CCFMD requirements

2. 2

   Final / CCFMD Acceptance Test

   System tested and verified operational; the base CCFMD fee for most system categories includes up to 2 inspections

Applies to: Residential Over-the-Counter (OTC) Permit — Electrical / Mechanical / Plumbing / Building

1. 1

   Rough-In

   Where applicable to the scope (electrical, plumbing, or mechanical rough-in) before covering

2. 2

   Final

   Devices/fixtures installed and operational, verified per adopted code; up to 2 inspections included in the Combo OTC fee

Applies to: Residential Solar Photovoltaic (PV) / BESS / Wind Turbine / Generator Permit

1. 1

   Rough Electrical

   Conduit runs, wire sizing, disconnect placement before energizing

2. 2

   Final

   Panel mounting, racking attachment, roof penetration sealing, electrical connections, and interconnection point verified

Final inspection only: Demolition Permit, Sign Permit (Commercial/Business Signage)