Mechanical / HVAC Permit — Berthoud, Colorado · Requirements sheet
Verified 2026-07-06 · Source: https://www.berthoud.org/DocumentCenter/View/7219/2026-Fee-Schedule
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
Mechanical / HVAC Permit in Berthoud, Colorado
Required for heating, cooling, and ventilation equipment installation or replacement in Berthoud. Governed by the 2024 International Mechanical Code (IMC) and 2024 International Fuel Gas Code (IFGC) as locally amended.
Verified 2026-07-06 · Source
When you need this permit
- Governed by the 2024 IMC (Chapters 1-15) and 2024 IFGC (Chapters 1-8) as adopted
- Plastic fuel gas piping must be buried a minimum of 18 inches below grade; fuel gas test pressure amended to 10 psig (from base code's 3 psig)
- Contractor must hold a Town of Berthoud Trade Contractor license (Mechanical, ICC G29 pathway) plus any applicable Colorado state trade credential Contractor
- New buildings/major renovations must provide dedicated electric-ready infrastructure for combustion HVAC equipment per Appendix CK/RM (reserved panel space, labeled circuit, condensate drain provision) even when the primary system is gas-fired
Required documents
Check off what you have — your progress is saved on this device.
Not ready yet — 0 of 2 required documents checked.
This checker covers one permit. A full project usually triggers several — our checklist will assemble all of them, free →
Fee schedule
Review timeline
Inspection process
- 1
Rough Mechanical
Ductwork, flues, and equipment placement before concealment
- 2
Final Inspection
Equipment operational, combustion air and venting verified
See the full Berthoud inspection guide — scheduling & re-inspection fees →
Tips
- Air Conditioning, Furnace Replacement, Gas Piping, and Hot Water Boiler/Heater all fall under the Town's 'Over the Counter One-Stop' flat-fee track ($150 base + $25 admin + $25 tech = $200 total each) rather than the full valuation-based Building Permit Fee schedule — this is typically faster and cheaper for straightforward like-for-like replacements.
- Even a straight gas-furnace replacement in new construction should account for the Electric Ready code's dedicated branch-circuit and panel-space requirements for future electrification, per Appendix RM/CK.
Frequently asked questions
Sources & verification
Verified against official sources. Last reviewed 2026-07-06.
Fee schedules
Codes & ordinances
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Berthoud building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Berthoud's permit history isn't searchable here yet
This page covers what the permit requires. What we don't have for Berthoud yet is the record of permits actually issued — the history you'd search by street address. That is a gap in our coverage, not a statement about any particular property.
Your email, and the place — never an address. We only use it to tell you when Berthoud lands. Privacy.
Other permits in Berthoud
Mechanical / HVAC Permit in other cities
Compare mechanical / hvac permit fees across Colorado →
Look up this fee in a different city →
Related guides
Now live
Build your Berthoud project checklist
Describe your project once and get every permit, document, and fee it triggers in Berthoud — in one checklist. Free, for any city and any number of projects.
Get started →