Commercial Tenant Improvement / Tenant Finish Permit — Roosevelt, Utah · Requirements sheet
Verified 2026-07-19 · Source: https://www.rooseveltcity.gov/DocumentCenter/View/3092/Commercial-Building-Permit
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
Commercial Tenant Improvement / Tenant Finish Permit in Roosevelt, Utah
Roosevelt does not issue a separate tenant-improvement permit; 'Interior Finish' is one of the explicit checkbox options under Permit Information on the City's own Commercial Building Permit Application, alongside New Commercial Building, Remodel Existing Building, Addition on Building, and Repair/Mechanical/Gas line/Electrical items. Interior-finish/tenant-improvement projects use the identical application form and the same citywide valuation-based Building Permit Fee table (Resolution 2024-322) used for new commercial construction.
Verified 2026-07-19 · Source
When you need this permit
- 'Interior Finish' checked under Permit Information on the Commercial Building Permit Application
- Architect and/or engineer seal required if the tenant space is within a building with three or more dwelling units, per the application's general commercial requirement
- Utah Licensed General Contractor's name and Utah State License #, or applicable trade contractor licenses (electrical, mechanical, plumbing) for the scope of work Contractor
- Duchesne County Assessor's Parcel Number for the job site
- 24-hour advance notice required to schedule inspections, per the application form
Required documents
Check off what you have — your progress is saved on this device.
Not ready yet — 0 of 1 required documents checked.
This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29 →
Fee schedule
Review timeline
Inspection process
- 1
Rough-In Inspection
Electrical, plumbing, and mechanical rough-in for interior tenant-finish work; 24-hour advance notice required.
- 2
Final
Final inspection prior to occupancy.
See the full Roosevelt inspection guide — scheduling & re-inspection fees →
Tips
- Roosevelt's Commercial Building Permit Application bundles 'Interior Finish' (tenant improvement) as just one of several checkboxes -- alongside New Commercial Building, Remodel Existing Building, and Addition on Building -- all billed from the same citywide valuation-based Building Permit Fee table (Resolution 2024-322).
- Confirm with the Building Department (435-722-5001) whether an interior tenant-finish project in an already-connected space is billed the Water Impact Fee / Sewer Connection line items on the application, since those typically apply to new utility connections rather than interior remodels.
Frequently asked questions
Sources & verification
Verified against official sources. Last reviewed 2026-07-19.
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Roosevelt building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
This one’s complicated · Get an expediter
Tell us about your project and we’ll connect you with a permit expediter who works in Roosevelt.
PermitBase may receive a referral fee from the expediter. This is a service introduction, not verified permit data or legal advice.
Other permits in Roosevelt
Commercial Tenant Improvement / Tenant Finish Permit in other cities
Compare commercial tenant improvement / tenant finish permit fees across Utah →
Look up this fee in a different city →
Related guides
Now live
Build your Roosevelt project checklist
Describe your project once and get every permit, document, and fee it triggers in Roosevelt — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.
Get started →