Water Heater Permit — Herriman, Utah · Requirements sheet
Verified 2026-07-01 · Source: https://www.herriman.gov/uploads/files/6491/2026-Fee-Schedule.pdf
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
Water Heater Permit in Herriman, Utah
Required for water heater installation or replacement in Herriman. Pulled as a plumbing permit; Herriman's fee schedule does not list a separate water heater line item — the applicable fee is the residential plumbing permit flat fee of $100.
Verified 2026-07-01 · Source
When you need this permit
- Water heater replacement (including like-for-like swaps)
- New water heater installation
- Conversion from tank to tankless water heater
- Gas line modification for water heater
Required documents
Check off what you have — your progress is saved on this device.
Not ready yet — 0 of 1 required documents checked.
This checker covers one permit. A full project usually triggers several — our checklist will assemble all of them, free →
Fee schedule
Herriman Master Fee Schedule (herriman.gov/uploads/files/6491/2026-Fee-Schedule.pdf, effective July 1, 2026), page 1: the Building Fees section has no separate water-heater line item anywhere in the schedule. Show full citationHide
Herriman Master Fee Schedule (herriman.gov/uploads/files/6491/2026-Fee-Schedule.pdf, effective July 1, 2026), page 1: the Building Fees section has no separate water-heater line item anywhere in the schedule. The only applicable line is 'Plumbing Permit: (Residential/Non-Residential) $100/$153', and water heater installs and replacements are pulled as a plumbing permit at that rate.Review timeline
Inspection process
- 1
Final
Verify proper installation, venting, T&P valve discharge, gas connections, and seismic strapping
See the full Herriman inspection guide — scheduling & re-inspection fees →
Tips
- Seismic strapping is required in Utah — two straps, at the upper third and lower third of the tank.
- T&P (temperature and pressure) relief valve discharge must terminate to within 6 inches of the floor or to the exterior per the 2024 IPC (current statewide per Utah Code § 15A-2-103(1)(d), effective 7/1/2026; Herriman's own Building Codes and Design Criteria page already reflects the 2024 IPC as of live-check 2026-07-16).
- Gas water heaters require proper venting — high-efficiency units use PVC/CPVC vent, standard units use metal B-vent.
- Utah law allows homeowners to perform plumbing work including water heater replacement on their own primary residence, but a permit and inspection from Herriman are still required.
Frequently asked questions
Sources & verification
Verified against official sources. Last reviewed 2026-07-01.
Fee schedules
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Herriman building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Property Access
Herriman's permit history is searchable by address
29,242 permits in our copy of Herriman's register — searchable by street address, with permit type, status, issued date and valuation where the city publishes them. This is what we hold, not a statement of everything Herriman has issued.
27,701 of these 29,242 permits — 94.7% — carry an issued date, and those run from 1985 to 2026. The remaining 1,541 have no date at all.
Other permits in Herriman
Water Heater Permit in other cities
Compare water heater permit fees across Utah →
Look up this fee in a different city →
Related guides
Now live
Build your Herriman project checklist
Describe your project once and get every permit, document, and fee it triggers in Herriman — in one checklist. Free, for any city and any number of projects.
Get started →