Skip to main content
PermitBase

Sign Permit in Riverton, Wyoming

Required for most permanent signs (wall, ground, pole, monument, LED, billboard-class, etc.) installed within the City of Riverton. Governed by Riverton Municipal Code Chapter 17.22 'Signs,' which uses the IBC as its base code and adds local height, size, location, and design rules; charged under a dedicated per-square-foot fee category in Resolution No. 1355 (Category 7).

Verified 2026-07-22 · Source

When you need this permit

  • A building permit is required for all signs EXCEPT inflatable signs, hand-carried signs, carnival/county fair signs, banners, placard signs, and political election/campaign signs, plus any exemptions separately listed in the IBC (RMC § 17.22.110)
  • Signs requiring a permit must be designed and constructed for a 90 mph wind load, with the design stamped by a structural engineer (RMC § 17.22.100.B)
  • Commercial ground/pole sign height (measured from mean ground level): 40 ft max on the Federal Blvd corridor north of Webbwood/south of Monroe; 30 ft max on the Federal Blvd corridor south of Webbwood/north of Monroe and on the Main Street corridor; 20 ft max on all other commercially zoned property (RMC § 17.22.050.A)
  • Residential ground/pole sign height: 4 ft max, except flagpoles (RMC § 17.22.050.B)
  • Maximum sign face area: 200 sq ft per face generally; 2 sq ft for a home-occupation ID sign; 1 sq ft for a home address/occupant ID sign; 6 sq ft per face for temporary signs (realtor, garage sale, etc.) (RMC § 17.22.060)
  • Billboards (freestanding signs exceeding 200 sq ft of facing) are prohibited citywide (RMC § 17.22.150)
  • Signs on residential-zoned property are restricted to specific temporary (campaign/lease/sale/construction/home-improvement, ≤6 sq ft) or dwelling-identification (≤2 sq ft, attached to the dwelling) types only (RMC § 17.22.080.C)
  • No sign may encroach into a right-of-way or easement except as allowed by the IBC, for hand-carried/temporary signs, or under the specific Main Street corridor luminaire-line rule (RMC § 17.22.080.A)
  • A sign altered or modified on more than 25% of its face area, with the face surface fully replaced, or with its support structure repaired/replaced, is treated as a new sign and must meet all current requirements (RMC § 17.22.070)
  • Sandwich board signs are allowed without exceeding 10 sq ft per side, must not impede pedestrian/vehicular traffic, and must be removed at close of business (RMC § 17.22.160) — not separately confirmed whether sandwich boards fall under the permit exemption list or require the standard sign permit

Required documents

Check off what you have — your progress is saved on this device.

Not ready yet0 of 3 required documents checked.

This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29

Fee schedule

SignsCity of Riverton Resolution No. 1355, Category 7 — verified by direct visual review of the resolution's scanned fee table (page 1 of 2), since the source PDF has no extractable text layer
$0.53 per square foot of sign face area, $39.00 minimum

Review timeline

Plan review
Not published — contact the department

How long did your Sign Permit permit actually take in Riverton?

Anonymous — one question, no email. Answers are combined and only shown once at least 5 people have reported.

Inspection process

  1. 1

    Final

    Confirms installed height, size, wind-load construction, and location comply with the approved permit and RMC Chapter 17.22

See the full Riverton inspection guide — scheduling & re-inspection fees →

Tips

  • Riverton's sign fee is a dedicated per-square-foot-of-face-area category ($0.53/sq ft, $39 minimum) under Resolution No. 1355 Category 7 — distinct from the general alterations or new-construction valuation tables used for most other permit types in this file.
  • Billboards (freestanding signs over 200 sq ft of facing) are flatly prohibited within Riverton city limits (RMC § 17.22.150) — there is no variance or conditional-use path documented in Chapter 17.22 for exceeding that size as a freestanding sign.
  • Several common temporary/promotional sign types (banners, placards, hand-carried signs, election signs, inflatable signs, carnival/fair signs) are permit-EXEMPT under RMC § 17.22.110, even though other sections of the chapter still regulate their size, placement, or duration (e.g., temporary signs must come down within 90 days per RMC § 17.22.190).
  • Sign height limits step down the further a commercial property is from the Federal Boulevard/Main Street core (40 ft → 30 ft → 20 ft) — confirm which height tier your parcel falls into before finalizing a pole or ground sign design.
  • LED signs carry additional citywide restrictions not shared with other sign types: 200 ft minimum separation from residential zoning (schools excepted), a 50 sq ft cap and night shut-off (10pm–6:30am) for school LED signs, and NIT-based brightness ceilings by color that step down for nighttime display (RMC § 17.22.140).

Frequently asked questions

Riverton requires a sign permit for: A building permit is required for all signs EXCEPT inflatable signs, hand-carried signs, carnival/county fair signs, banners, placard signs, and political election/campaign signs, plus any exemptions separately listed in the IBC (RMC § 17.22.110); Signs requiring a permit must be designed and constructed for a 90 mph wind load, with the design stamped by a structural engineer (RMC § 17.22.100.B); Commercial ground/pole sign height (measured from mean ground level): 40 ft max on the Federal Blvd corridor north of Webbwood/south of Monroe; 30 ft max on the Federal Blvd corridor south of Webbwood/north of Monroe and on the Main Street corridor; 20 ft max on all other commercially zoned property (RMC § 17.22.050.A); Residential ground/pole sign height: 4 ft max, except flagpoles (RMC § 17.22.050.B); Maximum sign face area: 200 sq ft per face generally; 2 sq ft for a home-occupation ID sign; 1 sq ft for a home address/occupant ID sign; 6 sq ft per face for temporary signs (realtor, garage sale, etc.) (RMC § 17.22.060); Billboards (freestanding signs exceeding 200 sq ft of facing) are prohibited citywide (RMC § 17.22.150); Signs on residential-zoned property are restricted to specific temporary (campaign/lease/sale/construction/home-improvement, ≤6 sq ft) or dwelling-identification (≤2 sq ft, attached to the dwelling) types only (RMC § 17.22.080.C); No sign may encroach into a right-of-way or easement except as allowed by the IBC, for hand-carried/temporary signs, or under the specific Main Street corridor luminaire-line rule (RMC § 17.22.080.A); A sign altered or modified on more than 25% of its face area, with the face surface fully replaced, or with its support structure repaired/replaced, is treated as a new sign and must meet all current requirements (RMC § 17.22.070); Sandwich board signs are allowed without exceeding 10 sq ft per side, must not impede pedestrian/vehicular traffic, and must be removed at close of business (RMC § 17.22.160) — not separately confirmed whether sandwich boards fall under the permit exemption list or require the standard sign permit. If your project isn't listed, confirm with City of Riverton Community Development Department — Building Division at (307) 856-2999 before starting work.

In Riverton, the published Signs is: $0.53 per square foot of sign face area, $39.00 minimum. These are the jurisdiction's own published figures — see the fee schedule table and source citations on this page.

Riverton does not publish a plan-review timeline for this permit. Contact City of Riverton Community Development Department — Building Division at (307) 856-2999 for current turnaround.

You'll need: Application for Building Permit; Sign Design/Structural Plans; Site/Elevation Plan. See the required-documents checklist on this page for details on each.

Riverton requires 1 inspection(s) for a sign permit, in order: Final. Schedule each through City of Riverton Community Development Department — Building Division ((307) 856-2999).

Apply through City of Riverton Community Development Department — Building Division at 816 N. Federal Blvd., Riverton, WY 82501. Phone: (307) 856-2999, email: kpetersen@rivertonwy.gov. Office hours: Mon–Fri (contact department for current hours); building permitting/inspection line (307) 857-7708. Official information: https://www.rivertonwy.gov/departments/community_dev/building_permits___inspections/index.php.

Yes, for most permanent signs. RMC § 17.22.110 requires a building permit for all signs except inflatable signs, hand-carried signs, carnival/county fair signs, banners, placard signs, and political election/campaign signs (plus any IBC-listed exemptions). The fee is $0.53 per square foot of sign face area, with a $39.00 minimum, per City of Riverton Resolution No. 1355.

It depends on zoning and location. Commercial ground/pole signs range from 20 to 40 feet depending on proximity to the Federal Boulevard and Main Street corridors (RMC § 17.22.050.A). Residential ground/pole signs are capped at 4 feet, except flagpoles. Billboards over 200 square feet of facing are prohibited outright.

Sources & verification

Verified against official sources. Last reviewed 2026-07-22.

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Riverton building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.