Skip to main content
PermitBase

EV Charging Station Permit (Electrical Permit) in Riverton, Wyoming

Required for installation of a Level 2 (or higher) electric vehicle charging station/EVSE within Riverton city limits, permitted under the City's standard Electrical Permit process (RMC Chapter 15.08). City of Riverton Resolution No. 1355 has no dedicated EV charger/EVSE fee line item — the same finding this file's solar-pv-permit entry documents for solar — so an EV charger circuit is charged under the general Electrical Alteration or Electrical Service Upgrade fee categories, whichever fits the scope of work.

Verified 2026-07-20 · Source

When you need this permit

  • Electrical permit required for the new/upgraded circuit and EVSE connection under RMC Chapter 15.08
  • Installation must comply with NEC Article 625 (Electric Vehicle Power Transfer System) as adopted by the City
  • A standalone new dedicated circuit for an EVSE is expected to fall under the 'Electrical Alteration' fee category; a project also requiring a panel/service upgrade would fall under 'Electrical Service Upgrade' instead
  • If installed as part of new construction, the EV charger circuit is covered by the new-construction per-square-foot fee, which 'includes building and all building systems' per Resolution No. 1355

Required documents

Check off what you have — your progress is saved on this device.

Not ready yet0 of 2 required documents checked.

This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29

Fee schedule

Electrical Alteration — closest published category for a new EV charger circuitCity of Riverton Resolution No. 1355, Category 3.B.3 — no dedicated EV/EVSE line item exists; this is the general 'alteration' category (adding a circuit to existing wiring) rather than a full service upgrade. If a panel/service upgrade is also needed, 'Electrical Service Upgrade' ($52.00 minimum, Category 3.B.2) would apply instead. Confirm exact classification with the Building Department at (307) 856-2999.
$26.00 minimum

Review timeline

Plan reviewTypical estimate — confirm current times with the Riverton building department
~1–10 business days

How long did your EV Charging Station Permit (Electrical Permit) permit actually take in Riverton?

Anonymous — one question, no email. Answers are combined and only shown once at least 5 people have reported.

Inspection process

  1. 1

    Rough Electric (if applicable)

    Conduit runs, wire sizing, and disconnect placement before cover

  2. 2

    Final

    EVSE breaker sizing, working clearances, and final electrical connections verified

See the full Riverton inspection guide — scheduling & re-inspection fees →

Tips

  • There is no separate EV-charger-specific fee line in Resolution No. 1355 — budget for the general Electrical Alteration category ($26.00 minimum) for a standalone circuit, or Electrical Service Upgrade ($52.00 minimum) if a panel/service upgrade is also required.
  • If the EV charger is installed as part of new construction, it is covered under the new-construction per-square-foot fee rather than a separate electrical line item.

Frequently asked questions

Riverton requires an ev charging station permit (electrical permit) for: Electrical permit required for the new/upgraded circuit and EVSE connection under RMC Chapter 15.08; Installation must comply with NEC Article 625 (Electric Vehicle Power Transfer System) as adopted by the City; A standalone new dedicated circuit for an EVSE is expected to fall under the 'Electrical Alteration' fee category; a project also requiring a panel/service upgrade would fall under 'Electrical Service Upgrade' instead; If installed as part of new construction, the EV charger circuit is covered by the new-construction per-square-foot fee, which 'includes building and all building systems' per Resolution No. 1355. If your project isn't listed, confirm with City of Riverton Community Development Department — Building Division at (307) 856-2999 before starting work.

No. City of Riverton Resolution No. 1355 does not include a dedicated EV charger/EVSE fee line; installations are charged under the general Electrical Alteration ($26.00 minimum) or Electrical Service Upgrade ($52.00 minimum) categories, the same treatment this file's solar-pv-permit entry documents for solar. Confirm the exact classification with the Building Department.

Plan review for an ev charging station permit (electrical permit) in Riverton typically runs 1–10 business days. This is an estimate, not a published figure — confirm current review times with City of Riverton Community Development Department — Building Division at (307) 856-2999.

You'll need: Application for Building Permit; Electrical Plan. See the required-documents checklist on this page for details on each.

Riverton requires 2 inspection(s) for an ev charging station permit (electrical permit), in order: Rough Electric (if applicable), Final. Schedule each through City of Riverton Community Development Department — Building Division ((307) 856-2999).

Apply through City of Riverton Community Development Department — Building Division at 816 N. Federal Blvd., Riverton, WY 82501. Phone: (307) 856-2999, email: kpetersen@rivertonwy.gov. Office hours: Mon–Fri (contact department for current hours); building permitting/inspection line (307) 857-7708. Official information: https://www.rivertonwy.gov/departments/community_dev/building_permits___inspections/index.php.

Riverton, Wyoming has adopted: 2024 International Building Code (IBC), including appendices A, B, C, F, H, I, J, K — adopted by Enrolled Ordinance No. 25-003 (effective March 22, 2025); 2024 International Residential Code (IRC), including appendices AA, BA, BB, BC, BD, BE, BF, BG, BH, BO, CA, CB, CC, CD, CE, CF (excluding Chapter 11) — Ordinance No. 25-003; 2024 International Mechanical Code (IMC), including appendix A — Ordinance No. 25-003; 2024 International Plumbing Code (IPC), including appendices C, D, E, F — Ordinance No. 25-003; 2024 International Fuel Gas Code (IFGC), including appendices A, B, C, D — Ordinance No. 25-003; 2024 International Fire Code (IFC), including appendices A–G — Ordinance No. 25-003; 2024 International Code Council Performance Code (ICCPC) — Ordinance No. 25-003; 2024 International Property Maintenance Code (IPMC), including appendices A, B — Ordinance No. 25-003; 2024 International Existing Building Code (IEBC) — Ordinance No. 25-003; National Electrical Code (NEC) — NFPA 70; Riverton Municipal Code § 15.08.110(B)(2) ties compliance to 'the latest edition of the National Electrical Code,' which per wsfm.wyo.gov/electrical-safety is now the 2026 edition, effective statewide July 1, 2026 (the 2023 edition was the applicable 'latest edition' from July 1, 2023 until then) — adopted by the City of Riverton itself as Riverton Municipal Code Chapter 15.08 'Electrical Code'; enforced by the city's own electrical inspector, NOT solely the Wyoming State Fire Marshal's default statewide program; National Fire Codes (NFC), current editions, NFPA; National Housing Construction and Safety Standards Act of 1974 (as amended through May 30, 2006, HUD) — governs manufactured/mobile home construction; ICC/ANSI A117.1-2017 — Accessible and Usable Buildings and Facilities. Local amendments apply — see the Riverton overview page for the full list.

Sources & verification

Verified against official sources. Last reviewed 2026-07-20.

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Riverton building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.