Skip to main content
PermitBase

Residential Building Permit (New Construction) in Riverton, Wyoming

Required for new single-family dwellings, manufactured homes on permanent foundations (IRC or HUD standard), and accessory buildings/additions/covered decks in the City of Riverton. Governed by the 2024 IRC (Riverton Municipal Code Chapter 15.04, Ordinance No. 25-003).

Verified 2026-07-01 · Source

When you need this permit

  • Submit a completed Application for Building Permit (or Simple Permit Application for smaller scopes)
  • Submit two (new residential checklist) or three (per the application's submittal checklist) complete sets of plans and specifications, or one electronic copy
  • Site plan showing property lines, north arrow, easements, dimensions, and all development
  • Floor plans, building elevations (N/S/E/W), foundation plan, roof/truss plan with engineered truss data
  • Framing sections (wall height, eave width, roof pitch) and other construction details
  • A letter from the Director of Public Works certifying availability of water and sewer service for the land (RMC § 15.04.010.A.1.a(4))
  • Engineering calculations required for any design deviating from conventional IBC/IRC framing, stamped by a Wyoming-licensed architect/engineer
  • Projects requiring professional design: most new commercial/industrial buildings, buildings 3+ stories, residential buildings with 5+ living units
  • Automatic sprinklers NOT required for detached one- and two-family dwellings or townhouses built to the IRC (locally amended IBC § 903.2.8 exception)
  • Planning Division approval of setbacks (RMC § 17.16.070) required before building permit submittal

Required documents

Check off what you have — your progress is saved on this device.

Not ready yet0 of 4 required documents checked.

This checker covers one permit. A full project usually triggers several — our checklist will assemble all of them, free →

Fee schedule

New Residential Construction (IRC or HUD-standard manufactured home with permanent foundation, accessory buildings, additions, covered decks, attached garages)City of Riverton Resolution No. 1355 (adopted May 16, 2017; current fee resolution per RMC § 15.04.030), Category 2.A
$0.42 per square foot of building area (includes building and all building systems)
Storage units, pole barns, post frame, detached garage, deck additions, decks, carports, similar structures (residential)Resolution No. 1355, Category 2.B
$0.13 per square foot of building area, $32.00 minimum
Plan Review Fee — In HouseResolution No. 1355, Category 8.B
10% of the Building Permit Fee based on valuation, $52.00 minimum
Plan Review Fee — Third PartyResolution No. 1355, Category 8.A
Actual cost
Foundation-Only PermitResolution No. 1355, Category 9
$130.00 (additional fees for the subsequent building permit required per IBC/IRC R106.3.3)

Review timeline

Plan reviewTypical estimate — confirm current times with the Riverton building department
~1–30 business days

How long did your Residential Building Permit (New Construction) permit actually take in Riverton?

Anonymous — one question, no email. Answers are combined and only shown once at least 5 people have reported.

Inspection process

  1. 1

    Temporary Electric Service

    After installation of the temporary meter base post with approved grounding; may be installed by a licensed electrical contractor or homeowner

  2. 2

    Footing

    Forms and rebar in place and tied before concrete placement

  3. 3

    Foundation Wall

    After forms are in place and vertical/horizontal rebar tied, before concrete placement

  4. 4

    Perimeter Drain

    Before backfill is placed around foundation walls enclosing an interior space below finished grade

  5. 5

    Underground Plumbing

    After all underground waste/vent/water plumbing is installed and pressure tested, before backfill/concrete

  6. 6

    Interior Footings

    After forms and rebar in place; interior footings isolated from the floor slab

  7. 7

    Rough Plumbing / Rough Electric / Rough Mechanical / Gas

    Required after wiring/boxes, waste/vent/water piping, venting/ductwork, and gas piping are installed, prior to insulation and sheetrock

  8. 8

    Rough Framing / Penetration Sealing

    After rough electrical, plumbing, mechanical, gas, roofing, and framing are complete and the structure is weather tight

  9. 9

    Sewer and Water

    After sewer and water service lines are installed, before backfill

  10. 10

    Final Inspection

    After the building is completed and ready for occupancy; a Certificate of Occupancy is required before moving in furnishings or occupying the structure

See the full Riverton inspection guide — scheduling & re-inspection fees →

Tips

  • The permit application is a single combined form covering building, plumbing, electrical, and mechanical scope — no need for four separate applications for a typical new home.
  • Fees are charged per square foot of building area (not a percentage-of-valuation table like many other cities) — $0.42/sq ft for new residential construction under Resolution No. 1355.
  • Call the Community Development Department at (307) 856-2999 at least one business day before you need any inspection; give the permit number and inspection type.
  • Riverton's 2024 code cycle (Ordinance No. 25-003) took effect March 22, 2025 — confirm which edition applies if your project spans the transition from the prior 2021 codes.
  • A Director of Public Works letter confirming water/sewer availability is a locally-added submittal requirement (RMC § 15.04.010.A.1.a(4)) not found in the stock IBC.

Frequently asked questions

Riverton requires a residential building permit (new construction) for: Submit a completed Application for Building Permit (or Simple Permit Application for smaller scopes); Submit two (new residential checklist) or three (per the application's submittal checklist) complete sets of plans and specifications, or one electronic copy; Site plan showing property lines, north arrow, easements, dimensions, and all development; Floor plans, building elevations (N/S/E/W), foundation plan, roof/truss plan with engineered truss data; Framing sections (wall height, eave width, roof pitch) and other construction details; A letter from the Director of Public Works certifying availability of water and sewer service for the land (RMC § 15.04.010.A.1.a(4)); Engineering calculations required for any design deviating from conventional IBC/IRC framing, stamped by a Wyoming-licensed architect/engineer; Projects requiring professional design: most new commercial/industrial buildings, buildings 3+ stories, residential buildings with 5+ living units; Automatic sprinklers NOT required for detached one- and two-family dwellings or townhouses built to the IRC (locally amended IBC § 903.2.8 exception); Planning Division approval of setbacks (RMC § 17.16.070) required before building permit submittal. If your project isn't listed, confirm with City of Riverton Community Development Department — Building Division at (307) 856-2999 before starting work.

New residential construction is charged at $0.42 per square foot of building area (includes the building and all building systems), per City of Riverton Resolution No. 1355. A plan review fee (10% of the permit fee, in-house, $52 minimum) also applies.

Plan review for a residential building permit (new construction) in Riverton typically runs 1–30 business days. This is an estimate, not a published figure — confirm current review times with City of Riverton Community Development Department — Building Division at (307) 856-2999.

You'll need: Application for Building Permit; Residential/Commercial Plan Submittal Checklist for Building Permits; Site Plan; Construction Drawings. Depending on your project, Riverton may also ask for: Truss Layout and Calculations; Engineering Calculations. See the required-documents checklist on this page for details on each.

Riverton requires 10 inspection(s) for a residential building permit (new construction), in order: Temporary Electric Service, Footing, Foundation Wall, Perimeter Drain, Underground Plumbing, Interior Footings, Rough Plumbing / Rough Electric / Rough Mechanical / Gas, Rough Framing / Penetration Sealing, Sewer and Water, Final Inspection. Schedule each through City of Riverton Community Development Department — Building Division ((307) 856-2999).

Apply through City of Riverton Community Development Department — Building Division at 816 N. Federal Blvd., Riverton, WY 82501. Phone: (307) 856-2999, email: kpetersen@rivertonwy.gov. Office hours: Mon–Fri (contact department for current hours); building permitting/inspection line (307) 857-7708. Official information: https://www.rivertonwy.gov/departments/community_dev/building_permits___inspections/index.php.

Riverton adopted the 2024 IBC, IRC, IMC, IPC, IFGC, IFC, ICCPC, IPMC, and IEBC via Enrolled Ordinance No. 25-003, effective March 22, 2025, per Riverton Municipal Code § 15.04.010.