PermitBaseMountain West

Residential Building Permit (New Construction) in Rock Springs, Wyoming

Verified

Required for new single-family dwellings and other one- and two-family residential construction within Rock Springs city limits. Governed by the 2024 IRC as adopted (with local amendments) by Rock Springs Municipal Code § 150.04. Single-family new construction is charged a flat permit fee rather than the valuation table.

Verified 2026-07-01 · Source

$1,100.00 flat — no plan review fee chargedSingle-family home (flat fee)

When you need this permit

Required documents

Fee schedule

Fee typeAmountNotes
Single-family home (flat fee)$1,100.00 flat — no plan review fee chargedRock Springs Municipal Code § 150.08(B)(2): 'Single-family homes: building permit fee, $1,100, no plan review fee.'
Building Permit Fee — general valuation table (used for non-single-family new residential construction, e.g. duplexes)$1 to $500: $32.45; $501–$2,000: $32.45 for the first $500 plus $4.20 per additional $100 or fraction; $2,001–$25,000: $95.31 for the first $2,000 plus $19.25 per additional $1,000; $25,001–$50,000: $538.72 for the first $25,000 plus $13.88 per additional $1,000; $50,001–$100,000: $885.22 for the first $50,000 plus $9.62 per additional $1,000; $100,001–$500,000: $1,366.47 for the first $100,000 plus $7.70 per additional $1,000; $500,001–$1,000,000: $4,446.47 for the first $500,000 plus $6.60 per additional $1,000; $1,000,001 and up: $7,712.10 for the first $1,000,000 plus $5.01 per additional $1,000Rock Springs Municipal Code § 150.08(B); this valuation table applies to all adopted codes (mechanical, plumbing, electrical included) unless a specific override applies
Plan Review Fee65% of the building permit fee§ 150.08(B)(1); waived for single-family homes and residential alterations/additions per the specific overrides
Reinspection Fee$100 per hour (or total hourly cost to the city, whichever is greater)§ 150.08(B), Other Inspections and Fees table, assessed under IBC Section 305.8
Inspections outside normal business hours$59 per hour

Review timeline

~1030 business days

Typical estimate — confirm current times with the Rock Springs building department

Inspection process

  1. 1

    Foundation / Footings

    Before concrete pour — footings must extend below the 42-inch minimum frost depth

  2. 2

    Framing

    After framing complete, before insulation or wall cover

  3. 3

    MEP Rough-In

    Mechanical, electrical, and plumbing rough-in before walls closed; electrical rough-in inspected by the City Electrical Inspector per § 150.33

  4. 4

    Final

    All work complete, ready for occupancy

Tips

Frequently asked questions

How much does a new single-family home permit cost in Rock Springs?
$1,100.00 flat fee, with no separate plan review fee, per Rock Springs Municipal Code § 150.08(B)(2). Larger or non-single-family residential projects are charged under the general valuation-based fee table instead.
Does Rock Springs require a Wyoming-licensed architect or engineer?
For new structures or additions of 5,000 sq ft or larger, yes — architectural plans must be designed and stamped by a Wyoming registered architect, and structural, mechanical/plumbing, and electrical plans must be sealed by the respective Wyoming-licensed engineers, per the City's Nonresidential Building Permit Application checklist.

Sources & verification

Verified against official sources. Last reviewed 2026-07-01.

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Rock Springs building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.

Other permits in Rock Springs

Get the AI compliance checklist

Upload your project scope, get a jurisdiction-specific checklist of everything you need. Coming soon.

We only use your email to send permit updates. No spam, unsubscribe anytime. Privacy.