Roofing Permit (Reroof / Roof Recover) — Farmington, Utah · Requirements sheet
Verified 2026-07-03 · Source: https://farmington.utah.gov/wp-content/uploads/2024/12/Reroof-Roof-Repair-Policy.pdf
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
Roofing Permit (Reroof / Roof Recover) in Farmington, Utah
Required for residential re-roof or roof recover in Farmington City, governed by the Reroof & Roof Repair Policy (effective July 1, 2024), which cites 2021 IBC/IEBC/IRC; IBC and IEBC are now 2024 statewide per Utah Code § 15A-2-103(1)(a)/(i) effective 7/1/2026 (the City policy document itself has not been updated), while IRC remains 2021 per § 15A-2-103(1)(b). Minor repairs under specified thresholds do not require a permit.
Verified 2026-07-03 · Source
When you need this permit
- Full roof replacement (tear-off of all existing layers)
- Roof recover (overlay), permitted only where the existing roof covering is not water-soaked, is not slate/clay/cement/asbestos-cement tile, and has fewer than two existing layers
- Repairs exceeding 20% of one roof surface or 10% of total roof area require a permit; smaller repairs do not
Required documents
Check off what you have — your progress is saved on this device.
Not ready yet — 0 of 1 required documents checked.
This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29 →
Fee schedule
Review timeline
Inspection process
- 1
Sheathing
For a recover, the existing roof is inspected; ensures the roof surface is smooth with proper fastening and spacing of solid sheathing, and crickets installed if needed
- 2
Ice Barrier
Proper placement of ice barrier per 2021 IRC R905.1.2/R905.2.8.5
- 3
Final
Confirms roof was installed properly with all required vents, flashings, and drip edges
See the full Farmington inspection guide — scheduling & re-inspection fees →
Tips
- Farmington is in Seismic Design Category D2 — existing spaced-lumber (plank) roof decks MUST be overlaid with minimum 7/16" plywood or OSB sheathing, properly fastened with finished gaps under 1/4 inch, before new roofing is installed (Reroof & Roof Repair Policy, eff. July 1, 2024).
- Roof recover is NOT permitted where the existing roof is water-soaked/deteriorated, is slate/clay/cement/asbestos-cement tile, or already has two or more layers of roof covering — full tear-off and replacement is required in those cases.
- Residential roof repairs limited to less than 20% of one roof surface or less than 10% of the total roof area do NOT require a permit from the City, per the Reroof & Roof Repair Policy.
- Commercial reroofs (depending on scope) ARE subject to seismic and parapet strengthening requirements under the IEBC and applicable Utah State Building Code amendments.
Frequently asked questions
Sources & verification
Verified against official sources. Last reviewed 2026-07-03.
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Farmington building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Other permits in Farmington
Roofing Permit (Reroof / Roof Recover) in other cities
Compare roofing permit (reroof / roof recover) fees across Utah →
Look up this fee in a different city →
Related guides
Now live
Build your Farmington project checklist
Describe your project once and get every permit, document, and fee it triggers in Farmington — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.
Get started →