Skip to main content
PermitBase

Roofing Permit (Reroof) in Gillette, Wyoming

Required for roof replacement (reroof) on residential and commercial buildings in Gillette. Governed by IRC Chapter 9 reroofing provisions per City Code § 5-I-3 — live text as of 2026-07-16 reads 2021 Edition (previously 2024 Edition; see codesAdopted); residential reroof is a low flat fee, commercial is a per-square-foot fee (reverified unchanged 2026-07-16).

Verified 2026-07-16 · Source

When you need this permit

  • Reroofing over 100 sq ft requires a permit
  • Complies with IRC Chapter 9 reroofing/re-covering requirements (structural loads, roof recover limitations, flashing reconstruction) — live-adopted edition as of 2026-07-16 is 2021 (previously 2024)
  • Materials/methods for re-covering or replacing an existing roof covering must comply with Chapter 9 of the adopted residential code

Required documents

Check off what you have — your progress is saved on this device.

Not ready yet0 of 1 required documents checked.

This checker covers one permit. A full project usually triggers several — our checklist will assemble all of them, free →

Fee schedule

Residential Reroof (shingles and shakes, over 100 sq ft)City Code § 5-IV-1(b) (Revised 6-16-2026)
$10.00
Commercial Reroof
$0.0050 per square foot

Review timeline

Plan reviewTypical estimate — confirm current times with the Gillette building department
~0–5 business days

How long did your Roofing Permit (Reroof) permit actually take in Gillette?

Anonymous — one question, no email. Answers are combined and only shown once at least 5 people have reported.

Inspection process

  1. 1

    Final

    Completed roof — flashing, underlayment, installation quality verified

See the full Gillette inspection guide — scheduling & re-inspection fees →

Tips

  • Roofing over 100 sq ft requires a permit in Gillette — small repair patches under that threshold generally do not.
  • Gillette's residential reroof permit fee is a flat $10.
  • Roof recover (installing new roofing over existing) without full tear-off is allowed under specific IRC conditions (e.g., manufacturer-approved recover systems, standing-seam metal roofs) — but is NOT allowed if the existing roof is water-soaked/deteriorated, is slate/clay/cement/asbestos-cement tile, or already has two or more layers of roof covering.

Frequently asked questions

Yes, for any reroofing job over 100 square feet. The residential reroof permit fee is a flat $10.00 per City Code § 5-IV-1(b).

In Gillette, the published Residential Reroof (shingles and shakes, over 100 sq ft) is: $10.00. Additional published fees: Commercial Reroof — $0.0050 per square foot. These are the jurisdiction's own published figures — see the fee schedule table and source citations on this page.

Plan review for a roofing permit (reroof) in Gillette typically runs 0–5 business days. This is an estimate, not a published figure — confirm current review times with City of Gillette Development Services — Building Division at (307) 686-5260.

You'll need: Roofing Permit Application (via EnerGov Self Service). See the required-documents checklist on this page for details on each.

Gillette requires 1 inspection(s) for a roofing permit (reroof), in order: Final. Schedule each through City of Gillette Development Services — Building Division ((307) 686-5260).

Apply through City of Gillette Development Services — Building Division at City Hall, 201 E. 5th St., 2nd Floor, Gillette, WY 82716. Phone: (307) 686-5260, email: Not published on city site — use "Send an E-mail" contact form on the Building Division page or main line gillette@gillettewy.gov. Office hours: Mon–Fri (contact department for current hours); permits/plans/licenses/inspections managed via EnerGov Self Service online portal (registration required). Official information: https://www.gillettewy.gov/Departments/Development-Services/Building-Division.

Gillette, Wyoming has adopted: International Building Code (IBC), 2021 Edition — including Appendix C, adopted by City of Gillette Code Chapter 5, Article I § 5-I-2 (Revised 6-16-2026). CHANGED 2026-07-16 audit: the live § 5-I-2.A text now reads "2021 Edition, including Appendix C" and no longer cites Ord. 4052 (12-17-2024), which had adopted the 2024 IBC edition with Appendices C and H per the source PDF as of the prior 2026-07-01 verification; the 2024-edition adoption no longer appears in the current ordinance text.; International Residential Code (IRC), 2021 Edition — including Appendices AA, AB, AC, AE, AN, AQ, and AW (AW 3D Printed Construction), adopted § 5-I-3 (Revised 6-16-2026). CHANGED 2026-07-16 audit: the live § 5-I-3.A text now reads "2021 Edition" with this different appendix set (previously 2024 Edition, Appendices CA, CB, BA, CE, BB, BM per Ord. 4052, 12-17-2024, which no longer appears in the current ordinance text).; International Plumbing Code (IPC), 2021 Edition — including Appendices B, D, E, adopted § 5-I-4 (Revised 6-16-2026) — NOTE: Gillette uses the IPC, not the Uniform Plumbing Code. CHANGED 2026-07-16 audit: edition now reads 2021 (previously 2024 per Ord. 4052, 12-17-2024, no longer cited); appendices B, D, E unchanged.; International Mechanical Code (IMC), 2021 Edition — adopted § 5-I-5 (Revised 6-16-2026). CHANGED 2026-07-16 audit: edition now reads 2021 (previously 2024 per Ord. 4052, 12-17-2024, no longer cited).; National Electrical Code — City Code § 5-I-6 (Revised 6-16-2026) (including Article 80/Annex H). CHANGED 2026-07-16 audit: the live § 5-I-6.A paragraph now contains two different edition references in the same sentence — "...adopted by reference the National Electrical Code, 2023 Edition..." and later "...of the National Electrical Code, 2026 Edition, including Article 80, are hereby referred to, adopted..." — with the amendment history newly listing Ord. 4081 (6-16-2026) as the latest ordinance for this section. The ordinance's own text does not reconcile the two edition years; previously cited cleanly as 2023 Edition only.; International Fuel Gas Code (IFGC), 2021 Edition — including Appendices A, B, C, D, adopted § 5-I-7 (Revised 6-16-2026). CHANGED 2026-07-16 audit: edition now reads 2021 (previously 2024 per Ord. 4052, 12-17-2024, no longer cited); appendices A, B, C, D unchanged.; International Fire Code (IFC), 2021 Edition — including Appendices B, C, D, E, F, and G, adopted § 5-I-8 (Revised 6-16-2026). CHANGED 2026-07-16 audit: edition now reads 2021 and Appendices H and I are absent (previously 2024 Edition with Appendices B–I per Ord. 4052, 12-17-2024, no longer cited).; International Existing Building Code (IEBC), 2021 Edition — adopted § 5-I-9 (Revised 6-16-2026). CHANGED 2026-07-16 audit: § 5-I-9.A reads "2021 Edition" (previously cited as 2024 Edition; the current text carries no ordinance citation for the edition line).; Uniform Code for the Abatement of Dangerous Buildings, 1997 Edition — adopted § 5-I-10 (Revised 6-16-2026); edition unchanged, only the chapter revision date-stamp updated at the 2026-07-16 audit.. Local amendments apply — see the Gillette overview page for the full list.

Sources & verification

Verified against official sources. Last reviewed 2026-07-16.

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Gillette building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.