Skip to main content
PermitBase

Electric Vehicle Charging Station Permit in Crested Butte, Colorado

The Town of Crested Butte does not publish a standalone EV charger/EVSE permit application or fee line distinct from its general Electrical Permit -- checked the Building Department page, Town Code Chapter 18 Article 5 (Electrical Code), and the 2026 Fee Schedule directly; none name a separate EV charger permit or fee. Installing or retrofitting an EV charger (or completing the wiring to an already-provisioned EV-Ready circuit) is electrical work and is processed as a standard Electrical Permit under the 2023 NEC as adopted (Town Code Sec. 18-5), billed on the same valuation-based Building Permit fee table used for all electrical work in Crested Butte. This is distinct from the EV-Ready parking-space wiring mandate that applies automatically to new residential construction and Level 3 alterations (documented in this file's residential-building-permit and residential-addition-remodel entries) -- that mandate provisions the circuit/receptacle during new construction, while this entry covers permitting an EV charger installation itself, whether as part of new construction or a standalone retrofit to an existing home.

Verified 2026-07-20 · Source

When you need this permit

  • Governed by the 2023 NEC as adopted, with no local amendments (Town Code Sec. 18-5-30: 'The code adopted herein is modified by the following amendments: None'), including NEC Article 625 (Electric Vehicle Power Transfer System)
  • For NEW residential construction and Level 3 alterations (more than 50% of work area renovated), a labeled 'Electric Vehicle Charging' branch circuit with a 208/240V, 30A receptacle in the garage or within 6 feet of the driveway is already a mandatory requirement of the underlying Building/Electrical Permit -- see this file's residential-building-permit and residential-addition-remodel entries
  • For a STANDALONE EV charger retrofit to an existing home not otherwise triggering a Level 3 alteration, a standard Electrical Permit is required for the new circuit/charger installation
  • Current Gunnison County building contractor license required for contractor-performed work Contractor
  • Fees billed under the same valuation-based Building Permit fee table as other electrical work; no separate EV-charger-specific fee line item found in the 2026 Fee Schedule
  • Inspection requests must be submitted at least 5 working days in advance (adopted IFC Sec. 108.2.1)

Required documents

Check off what you have — your progress is saved on this device.

Not ready yet — 0 of 1 required documents checked.

This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29 →

Fee schedule

Permit Fee (valuation-based, same table as Building Permit)No standalone EV-charger or electrical-specific fee schedule is published separately in the 2026 Fee Schedule; billed under the general valuation-based table, the same mechanism documented in this file's electrical-permit entry
Per the 2026 Fee Schedule's Building Permit valuation tiers
Plan Review Fee
30% of Permit Fee (Residential) / 60% (Commercial)
Reinspection Fee
$65.00/hour, minimum two-hour charge

Review timeline

Plan review
Not published — contact the department

How long did your Electric Vehicle Charging Station Permit permit actually take in Crested Butte?

Anonymous — one question, no email. Answers are combined and only shown once at least 5 people have reported.

Inspection process

  1. 1

    Rough Electrical

    New circuit/wiring for the charger installed before concealment; 5 working days advance notice required

  2. 2

    Final Electrical

    Charger installed and connected, circuit verified before energizing

See the full Crested Butte inspection guide — scheduling & re-inspection fees →

Tips

  • New homes and Level 3 alterations in Crested Butte already must include a dedicated EV-Ready 208/240V, 30A circuit as part of the underlying building permit -- confirm whether your project already has this provisioned before assuming a full new-circuit EV charger permit is needed.
  • For a standalone retrofit on an existing home without a pre-provisioned EV-Ready circuit, the EV charger installation is billed under the same valuation-based Building Permit fee table as any other electrical work -- there is no separate, lower-cost EV-specific fee track.

Frequently asked questions

Crested Butte requires an electric vehicle charging station permit for: Governed by the 2023 NEC as adopted, with no local amendments (Town Code Sec. 18-5-30: 'The code adopted herein is modified by the following amendments: None'), including NEC Article 625 (Electric Vehicle Power Transfer System); For NEW residential construction and Level 3 alterations (more than 50% of work area renovated), a labeled 'Electric Vehicle Charging' branch circuit with a 208/240V, 30A receptacle in the garage or within 6 feet of the driveway is already a mandatory requirement of the underlying Building/Electrical Permit -- see this file's residential-building-permit and residential-addition-remodel entries; For a STANDALONE EV charger retrofit to an existing home not otherwise triggering a Level 3 alteration, a standard Electrical Permit is required for the new circuit/charger installation; Current Gunnison County building contractor license required for contractor-performed work; Fees billed under the same valuation-based Building Permit fee table as other electrical work; no separate EV-charger-specific fee line item found in the 2026 Fee Schedule; Inspection requests must be submitted at least 5 working days in advance (adopted IFC Sec. 108.2.1). If your project isn't listed, confirm with Town of Crested Butte Building Department (Community Development Department) at (970) 349-5338 before starting work.

In Crested Butte, the published Permit Fee (valuation-based, same table as Building Permit) is: Per the 2026 Fee Schedule's Building Permit valuation tiers. Additional published fees: Plan Review Fee — 30% of Permit Fee (Residential) / 60% (Commercial); Reinspection Fee — $65.00/hour, minimum two-hour charge. These are the jurisdiction's own published figures — see the fee schedule table and source citations on this page.

Crested Butte does not publish a plan-review timeline for this permit. Contact Town of Crested Butte Building Department (Community Development Department) at (970) 349-5338 for current turnaround.

You'll need: Electrical Permit Application. Depending on your project, Crested Butte may also ask for: Gunnison County Building Contractor License. See the required-documents checklist on this page for details on each.

Crested Butte requires 2 inspection(s) for an electric vehicle charging station permit, in order: Rough Electrical, Final Electrical. Schedule each through Town of Crested Butte Building Department (Community Development Department) ((970) 349-5338).

Apply through Town of Crested Butte Building Department (Community Development Department) at 507 Maroon Ave, Crested Butte, CO 81224 (Building Department mailing address: PO Box 39, Crested Butte, CO 81224). Phone: (970) 349-5338, email: building@crestedbutte-co.gov. Office hours: Monday-Friday 8:30 a.m. to 5:00 p.m. Building Official Astrid Matison (ext. 116, amatison@crestedbutte-co.gov). Building Inspector Josh Staab (ext. 127, jstaab@crestedbutte-co.gov). Community Development Director Mel Yemma (ext. 119, melyemma@crestedbutte-co.gov). BOZAR/Planning questions: planning@crestedbutte-co.gov, (970) 349-5338 ext. 121.. Official information: https://townofcrestedbutte.colorado.gov/planning-permitting/community-development.

Crested Butte, Colorado has adopted: 2024 International Building Code (IBC), Chapters 1-35 without appendices — adopted by reference, Town Code Chapter 18, Article 1 (Sec. 18-1-10), pursuant to Title 31, Article 16, Part 2, C.R.S.; 2024 International Residential Code (IRC) — Town Code Chapter 18, Article 2 (Sec. 18-2-10), with extensive local amendments including an all-electric mandate and Table R301.2 climatic design data (Sec. 18-2-30); International Existing Building Code (IEBC) — Town Code Chapter 18, Article 2.5; International Green Construction Code (IgCC), selected sections — Town Code Chapter 18, Article 1.5 (Sec. 18-1.5-30), applicable to new commercial construction; 2021 International Mechanical Code (IMC), including Appendix A — Town Code Chapter 18, Article 3 (Sec. 18-3-10); 2021 International Plumbing Code (IPC), including Appendices C and E — Town Code Chapter 18, Article 4 (Sec. 18-4-10); 2023 National Electrical Code (NEC) — Town Code Chapter 18, Article 5 (Sec. 18-5-10), adopted with no local amendments; 2021 International Fire Code (IFC), including Appendices B-M — Town Code Chapter 18, Article 6 (Sec. 18-6-10), enforced with Crested Butte Fire Protection District (CBFPD) coordination; 2025 Colorado Wildfire Resiliency Code (CWRC), 8 CCR 1507-39 — Town Code Chapter 18, Article 6.5 (Sec. 18-6.5-10), established statewide July 1, 2025; Town enforcement begins June 1, 2026 per the Town's own CWRC Summary Sheet; 2021 International Fuel Gas Code (IFGC), including Appendices — Town Code Chapter 18, Article 7 (Sec. 18-7-10), with local amendments requiring high-efficiency direct-vent sealed-combustion appliances only (deleting IFGC's alternative combustion-air provisions); 2021 International Energy Conservation Code (IECC), without appendices — Town Code Chapter 18, Article 9, Sec. 18-9-40; new construction is additionally required to achieve DOE Zero Energy Ready Home (ZERH) certification per the Town's 2024 Building Code Information page and fact sheet, effective for permits starting January 1, 2026; Colorado Model Electric Ready and Solar Ready Code — referenced throughout the Town's 2024 Building Code fact sheet for EV-ready parking, solar-ready zones, and electric-ready gas-appliance provisions; Full Town Code Chapter 18 (Building Regulations) text hosted at townofcrestedbutte.colorado.gov (Town Code Chapter 18 Revised PDF, Supp. No. 22) and mirrored on library.municode.com/co/crested_butte. Local amendments apply — see the Crested Butte overview page for the full list.

No. The Town does not publish a standalone EV charger/EVSE permit or fee line. Installing an EV charger is processed as a standard Electrical Permit under the Town's adopted 2023 NEC, billed on the same valuation-based fee table used for all electrical work. Note that new residential construction and Level 3 alterations already require a dedicated EV-Ready circuit as part of the underlying building permit under the Town's electric-vehicle-readiness mandate.

Sources & verification

Verified against official sources. Last reviewed 2026-07-20.

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Crested Butte building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.

Other permits in Crested Butte

Residential Building Permit (New Construction)Residential Addition / Remodel PermitElectrical PermitPlumbing PermitMechanical / HVAC PermitRoofing Permit (Re-Roof)Solar PV PermitBuilding Relocation and Demolition Permit

Electric Vehicle Charging Station Permit in other cities

Akron, ColoradoAlamosa, ColoradoArvada, ColoradoAspen, ColoradoAult, ColoradoAurora, ColoradoAvon, ColoradoBasalt, Colorado

Compare electric vehicle charging station permit fees across Colorado →

Look up this fee in a different city →

Embed this data card →

Related guides

EV Charger

Now live

Build your Crested Butte project checklist

Describe your project once and get every permit, document, and fee it triggers in Crested Butte — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.

Get started →