Sign Permit — Firestone, Colorado · Requirements sheet
Verified 2026-08-13 · Source: https://firestoneco.gov/DocumentCenter/View/6548/Firestone-Development-Code---February-2025
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
Sign Permit in Firestone, Colorado
Required to display, construct, install, erect, remodel, relocate, expand, or alter any sign (or change its copy) within Firestone town limits, per Firestone Development Code (FDC) Section 16.6.12(D). RESEARCHED 2026-08-13: unlike several peer Colorado jurisdictions in this corpus where the Municode-hosted code is a JavaScript-only shell that cannot be directly read, the Town of Firestone hosts its full Development Code as a directly-downloadable PDF ("Firestone Development Code, February 2025") on firestoneco.gov itself, which was downloaded and read directly in full for this entry -- so the sign-permit requirement, the fee-by-reference rule, and the design/temporary-sign standards below come from the primary ordinance text itself, not a search-recovered excerpt or a third-party summary. The Town's own separate Sign Permit Submittal Checklist (REV 4.24, PDF) and Building Division Fee Schedule (REV 01.2025, PDF, confirming no standalone sign fee line item) were also downloaded and read directly. Carries 'verified' confidence on that basis.
Verified 2026-08-13 · Source
When you need this permit
- No sign shall be displayed, constructed, installed, erected, remodeled, relocated, expanded, altered, or have its copy changed until a sign permit is obtained from the Town, per FDC Section 16.6.12(D)(1); no permit is required for routine sign maintenance
- The fee for a sign permit shall be the building permit fee charged for the sign as determined by the currently adopted building and electrical codes, per FDC Section 16.6.12(D)(2) -- confirmed consistent with the absence of any standalone sign-permit fee line item in the Town's own Building Division Fee Schedule (REV 01.2025, read directly in full)
- Exceptions from the sign PERMIT requirement (still subject to other sign standards), per FDC Section 16.6.12(D)(4): building numbers/addresses, interior signs, signs accessory to utility cabinets or pedestals, small signs, and temporary signs in single-family zoning districts
- Full exemptions from the sign ARTICLE entirely, per FDC Section 16.6.12(C)(2): U.S./state/civic-organization flags; merchandise visible in a store window; scoreboards/time-temperature/stock-exchange devices; required (code-mandated) signs; memorial signs; governmental signs; murals that do not advertise a business; address-only signs; Town decorations/Special-Events signage on Town property; and freestanding artwork/architectural features integral to a building's design
- Design standards vary by zoning district and sign type (FDC Tables 6.12-2, 6.12-3, 6.12-4): single-family residential wall signs capped at 4 sf with no illumination, freestanding subdivision-entry signs up to 100 sf/8 ft; multi-family wall signs up to 32 sf, freestanding entry signs up to 100 sf/8 ft; non-residential wall signs up to 100 sf principal + 32 sf per secondary sign, freestanding signs up to 32 sf/10 ft (1 per street frontage, +1 per 500 ft of additional frontage), and large-development freestanding "Development Identification" signs up to 200 sf/35 ft (developments over 20 acres on arterial/collector frontage), boosted to 300 sf/50 ft within 1,200 ft of the I-25 right-of-way
- Engineering by a Colorado-licensed design professional is required for all monument sign foundations and for the connections of all building-mounted signs; structural design criteria must include everything required by 2018 IBC 1603 (wind speed/exposure, ground snow load, risk category, seismic design category/site class, soil-bearing data for monument signs)
- Changeable Copy Displays (CCDs), including Electronic Message Displays (EMDs), are permitted only in non-residential zoning districts, must be integrated into a permanent sign's face, are capped at 33.3% of a monument sign's face area, must display static messages only (no image transitions), may not change more than once every 60 seconds, an EMD pixel pitch may not exceed 20 millimeters, and automatic dimming (software or solar sensor) is required to control nighttime brightness/glare
- Temporary signs (FDC Tables 6.12-5, 6.12-6) are capped by zoning category: non-residential wall-attached temporary signs up to 40 sf for 60 days per sign / 180 days per year total; multi-family up to 8 sf for 60 days per sign / 90 days per year; single-family up to 6 sf for 60 days per sign / 90 days per year. Freestanding temporary signs: non-residential up to 32 sf/8 ft (64 sf/12 ft and doubled sign count within 1,200 ft of I-25), multi-family and single-family up to 8-32 sf/8 ft, all subject to the same 60-day-per-sign / 90-180-day-per-year caps
- Prohibited outright, per FDC Section 16.6.12(F): animated/moving/flashing/blinking signs (except conforming EMDs and clocks/temperature displays), abandoned or inoperable signs, roof signs (extending above the roofline), vehicle signs, signs obstructing required egress/ingress/ventilation/safety equipment, signs attached to trees/utility poles/pedestals/mailboxes/traffic-control devices, and signs placed in the public right-of-way (other than Town/governmental signage)
Required documents
Check off what you have — your progress is saved on this device.
Not ready yet — 0 of 4 required documents checked.
This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29 →
Fee schedule
Review timeline
Inspection process
- 1
Final Inspection
Sign dimensions, location, structural connections/foundation, and illumination verified against the approved permit and plans; performed by SAFEbuilt Colorado under contract to the Town, consistent with this file's other permit types
See the full Firestone inspection guide — scheduling & re-inspection fees →
Tips
- Firestone's sign fee mirrors the approach documented for Dacono elsewhere in this corpus: the sign permit fee is simply the general valuation-based Building Permit Fee, not a flat sign-specific dollar amount -- cost scales with the sign's own valuation.
- Monument sign foundations and building-mounted sign connections both require genuine structural engineering (2018 IBC 1603 design criteria) -- budget a Colorado-licensed engineer into the project timeline for any sign beyond a simple wall-mounted panel.
- Electronic Message Displays are allowed only in non-residential zoning districts and are capped at one-third of a monument sign's face area with a 20mm maximum pixel pitch -- confirm zoning before specifying digital signage.
- Development Identification signs for large developments (20+ acres) get a much bigger allowance near I-25 (300 sf / 50 ft within 1,200 feet of the interstate right-of-way) than the standard non-residential freestanding sign cap (32 sf / 10 ft) -- worth knowing for corridor-facing development signage.
Frequently asked questions
Sources & verification
Verified against official sources. Last reviewed 2026-08-13.
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Firestone building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Other permits in Firestone
Sign Permit in other cities
Compare sign permit fees across Colorado →
Look up this fee in a different city →
Now live
Build your Firestone project checklist
Describe your project once and get every permit, document, and fee it triggers in Firestone — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.
Get started →