Sign Permit — Pleasant View, Utah · Requirements sheet
Verified 2026-07-20 · Source: https://www.pleasantviewut.gov/DocumentCenter/View/441/Consolidated-Fee-Schedule---as-of-July-1-2026-PDF-
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
Sign Permit in Pleasant View, Utah
Required for placement of all signs in Pleasant View except those specifically exempted, per City Code § 18.29.310 (Chapter 18.29, Sign Regulations). It is unlawful to erect, install, or modify a sign requiring a permit without first obtaining one. Applications are accepted only from licensed general contractors or sign installation contractors (§ 18.29.140).
Verified 2026-07-20 · Source
When you need this permit
- Sign must be installed by, or the application submitted by, a licensed general contractor or sign installation contractor licensed by the State of Utah (§ 18.29.140) Contractor
- Sign must comply with current city-adopted building and construction codes; electric sign components must be labeled per U.S. Bureau of Standards, Underwriters' Laboratories, or similar authority (§ 18.29.180.A)
- Engineering drawings stamped and signed by a Utah-licensed structural engineer, where required by the department, attesting to the adequacy of the sign's construction and supports (§ 18.29.180.B)
- Freestanding sign structures/poles must be self-supporting and permanently attached to concrete foundations (§ 18.29.180.D)
- A minimum 8-foot vertical clearance is required between the ground/sidewalk and any part of a projecting sign that extends more than 8 inches from a wall (§ 18.29.180.G)
Required documents
Check off what you have — your progress is saved on this device.
Not ready yet — 0 of 1 required documents checked.
This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29 →
Fee schedule
Review timeline
Inspection process
- 1
Footing (freestanding/pole/monument signs)
Verify concrete foundation for self-supporting freestanding sign structures before completion, per § 18.29.180.D.
- 2
Final
Verify completed sign matches approved permit — construction standards, clearance, and (if applicable) electrical.
See the full Pleasant View inspection guide — scheduling & re-inspection fees →
Tips
- A sign permit does NOT include electrical work — illuminated signs need a separate electrical permit and pay a separate electrical inspection fee, per City Code § 18.29.310.F and the fee schedule's Signs note.
- The fee for sign permits is set in the city's fee schedule per § 18.29.310.E, not fixed in the ordinance itself — flat fees by sign type: Wall-mounted $50, Monument/Low Profile $50, Pole $100, Billboard $250.
- Sign permit applications are accepted only from a State of Utah-licensed general contractor or sign installation contractor, per § 18.29.140. Contractor
- Routine changes — changing replaceable copy/message, electrical maintenance/repainting/cleaning, or sign repair — do NOT require a new sign permit, per § 18.29.310.D.
- Working without a permit doubles the building fee, per the Consolidated Fee Schedule's Investigation Fee line.
Frequently asked questions
Sources & verification
Verified against official sources. Last reviewed 2026-07-20.
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Pleasant View building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Other permits in Pleasant View
Sign Permit in other cities
Compare sign permit fees across Utah →
Look up this fee in a different city →
Now live
Build your Pleasant View project checklist
Describe your project once and get every permit, document, and fee it triggers in Pleasant View — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.
Get started →