Skip to main content
PermitBase

Fire Alarm System Permit in Pleasant View, Utah

Pleasant View publishes no distinct fire alarm system permit type or fee line item — the 19-page Consolidated Fee Schedule (effective July 1, 2026) has no “fire alarm,” “alarm system,” or “fire detection” entry. Fire alarm wiring and low-voltage circuits fall within the scope of the statewide-adopted National Electrical Code, so standalone alarm-system electrical work is billed like any other standalone electrical work: under the city's Electrical Permit and its flat $75.00 Electrical Inspection Fee, the same treatment given EV chargers and solar PV interconnections. Where alarm work is part of new construction or a tenant improvement, it is captured instead within that project's valuation-based Building Permit Fee (Table for Permit Fees, Appendix L). Fire code plan review of the alarm system's design — device placement, notification appliance coverage, monitoring — is handled by North View Fire District (Fire Marshal, 801-782-8159). The District (northviewfire.gov) publishes no separate alarm plan-review or permit fee and names only a Burn Permit among its permit types, so confirm any District charge with the Fire Marshal before you budget.

Reviewed 2026-07-22 · Source

When you need this permit

  • Installation, alteration, or extension of a fire alarm/detection system in a building located in Pleasant View, with wiring regulated by the statewide-adopted National Electrical Code and design reviewed for fire-code compliance by North View Fire District
  • Building Permit Application, selecting the Electrical Permit category for the alarm circuit work, submitted through the City Inspect online portal
  • Fire Marshal review/approval by North View Fire District (801-782-8159) for system design and notification-appliance coverage, coordinated separately from the city's own Building Department review

Required documents

Check off what you have — your progress is saved on this device.

Not ready yet — 0 of 2 required documents checked.

This checker covers one permit. A full project usually triggers several — our checklist will assemble all of them, free →

Fee schedule

Electrical Inspection Fee (covers fire alarm system wiring/circuits)
Pleasant View City Consolidated Fee Schedule (as of July 1, 2026), Building Permits section, page 3: Electrical Inspection, $75.00. Show full citationPleasant View City Consolidated Fee Schedule (as of July 1, 2026), Building Permits section, page 3: Electrical Inspection, $75.00. Fire alarm system wiring is electrical work regulated by the statewide-adopted NEC, and Pleasant View publishes no fire-alarm-specific fee, so this flat electrical inspection fee is the governing city charge.
$75.00
Building Permit Fee -- valuation-based Table for Permit Fees (Appendix L), when alarm work is part of new construction or a tenant improvement
Pleasant View City Consolidated Fee Schedule (as of July 1, 2026), page 18, 'Table for Permit Fees, Appendix L' — the same general table used for all other Building Permits here. Show full citationPleasant View City Consolidated Fee Schedule (as of July 1, 2026), page 18, 'Table for Permit Fees, Appendix L' — the same general table used for all other Building Permits here. When a fire alarm system is installed as part of new construction or a tenant improvement rather than as standalone retrofit work, its cost contributes to the overall project valuation billed under this table rather than being itemized separately; Pleasant View publishes no distinct alarm valuation line.
$1-$500: $24 flat. $501-$2,000: $24 for the first $500, plus $3 per additional $100 (or fraction). $2,001-$40,000: $69 for the first $2,000, plus $11 per additional $1,000 (or fraction). $40,001-$100,000: $487 for the first $40,000, plus $9 per additional $1,000. $100,001-$500,000: $1,027 for the first $100,000, plus $7 per additional $1,000. $500,001-$1,000,000: $3,827 for the first $500,000, plus $5 per additional $1,000. $1,000,001-$5,000,000: $6,327 for the first $1,000,000, plus $3 per additional $1,000. $5,000,001 and over: $18,327 for the first $5,000,000, plus $1 per additional $1,000.
North View Fire District Plan Review / Permit Fee
North View Fire District (Fire Marshal, 801-782-8159; Show full citationNorth View Fire District (Fire Marshal, 801-782-8159; serving North Ogden, Pleasant View, and Harrisville) is responsible for fire code plan review of alarm system design, but neither its official website (northviewfire.gov) -- whose Services and Find It Fast pages enumerate only a Burn Permit as a named permit type -- nor any located District resolution or fee schedule discloses a separate alarm plan-review or permit fee. Confirm current fire-system permitting practice and any District-charged fee directly with the Fire Marshal before applying.
Not published

Review timeline

Plan reviewTypical estimate — confirm current times with the Pleasant View building department
~14–14 business days

How long did your Fire Alarm System Permit permit actually take in Pleasant View?

Anonymous — one question, no email. Answers are combined and only shown once at least 5 people have reported.

Inspection process

  1. 1

    Fire Marshal Plan Review / System Test

    Alarm system design reviewed, and completed installation tested/accepted, by North View Fire District's Fire Marshal (801-782-8159); no standardized submittal or inspection-scheduling process is published on the District's website.

  2. 2

    Electrical

    Electrical inspection of alarm wiring/circuits scheduled via City Inspect (pleasantview.cityinspect.com) or Sunrise Engineering (1-800-560-6151); flat $75.00 inspection fee per the Consolidated Fee Schedule.

See the full Pleasant View inspection guide — scheduling & re-inspection fees →

Tips

  • Pleasant View does not publish a distinct fire alarm permit type or fee -- a full page-by-page re-read of the entire 19-page Consolidated Fee Schedule (as of July 1, 2026) on 2026-07-22 found no 'fire alarm,' 'alarm system,' or 'fire detection' line item anywhere in the document.
  • Fire alarm wiring is billed under the standard Electrical Permit's flat $75.00 electrical inspection fee — the same flat fee that covers EV charger and solar PV interconnection wiring. There is no fire-alarm premium and no separate fee tier.
  • North View Fire District's own official website (northviewfire.gov) does not publish an alarm permit, fee, or plan-review process either -- its Services and Find It Fast pages name only a Burn Permit as an enumerated permit type. Confirm current alarm-system design-review requirements and any fee directly with the Fire Marshal, (801) 782-8159, before applying.
  • Approved building plans must be on-site at the time of every inspection, per Pleasant View's official Permits page.

Frequently asked questions

Pleasant View requires a fire alarm system permit for: Installation, alteration, or extension of a fire alarm/detection system in a building located in Pleasant View, with wiring regulated by the statewide-adopted National Electrical Code and design reviewed for fire-code compliance by North View Fire District; Building Permit Application, selecting the Electrical Permit category for the alarm circuit work, submitted through the City Inspect online portal; Fire Marshal review/approval by North View Fire District (801-782-8159) for system design and notification-appliance coverage, coordinated separately from the city's own Building Department review. If your project isn't listed, confirm with Pleasant View City Planning, Zoning & Building Department at (801) 782-8529 before starting work.

No. Pleasant View does not publish a distinct fire alarm permit type or fee in its Consolidated Fee Schedule (as of July 1, 2026). Fire alarm wiring is electrical work billed under the standard Electrical Permit's flat $75.00 Electrical Inspection fee. North View Fire District's Fire Marshal (801-782-8159) reviews the alarm system's design for fire-code compliance, but the District does not publish its own separate plan-review or permit fee.

Plan review for a fire alarm system permit in Pleasant View typically runs 14–14 business days. This is an estimate, not a published figure — confirm current review times with Pleasant View City Planning, Zoning & Building Department at (801) 782-8529.

You'll need: Building Permit Application (City Inspect); Fire Alarm System Plans / Shop Drawings. See the required-documents checklist on this page for details on each.

Pleasant View requires 2 inspection(s) for a fire alarm system permit, in order: Fire Marshal Plan Review / System Test, Electrical. Schedule each through Pleasant View City Planning, Zoning & Building Department ((801) 782-8529).

Apply through Pleasant View City Planning, Zoning & Building Department at 520 W Elberta Dr, Pleasant View, UT 84414. Phone: (801) 782-8529. Office hours: Mon–Thu 8:00 AM – 5:00 PM; Fri 8:00 AM – 12:00 PM. Official information: https://www.pleasantviewut.gov/168/Planning-Zoning-Building.

Pleasant View, Utah has adopted: 2024 International Building Code (IBC), including Appendices C and J — current statewide code per Utah Code § 15A-2-103(1)(a), in force since July 1, 2026, under the statewide preemption mandate of § 15A-1-204 (State Construction and Fire Codes Act); Pleasant View's own codified Title 15.04 text still references the 2000 IBC (Ord. 2002-10), but that codification is stale and superseded by the mandatory statewide cycle.; 2021 International Residential Code (IRC) — current statewide code per Utah Code § 15A-2-103(1)(b) (unchanged by the July 1, 2026 code cycle flip); Pleasant View's Consolidated Fee Schedule (as of July 1, 2026) still labels its Table for Permit Fees 'Appendix L, 2015 IRC,' which is stale fee-table boilerplate, not evidence the city enforces an outdated code edition — plan review and inspections apply the current statewide IRC per § 15A-1-204.; 2024 International Plumbing Code (IPC) — current statewide code per Utah Code § 15A-2-103(1)(d); Pleasant View's codified Title 15.16.010 references the 2000 IPC (stale codification), superseded by § 15A-1-204.; 2024 International Mechanical Code (IMC) / International Fuel Gas Code (IFGC) — current statewide code per Utah Code § 15A-2-103(1)(e)/(f); Pleasant View's codified Title 15.12.010 references the 2000 IMC (stale codification), superseded by § 15A-1-204.; 2024 International Energy Conservation Code (IECC) with Utah amendments — current statewide code per Utah Code § 15A-2-103(1)(h) (a single edition applies statewide, no separate residential/commercial split); Pleasant View's codified Title 15.28.010 references the 2000 IECC (stale codification), superseded by § 15A-1-204.; 2023 National Electrical Code (NEC) — current statewide code per Utah Code § 15A-2-103(1)(g) (unchanged by the July 1, 2026 code cycle flip); Pleasant View's codified Title 15.20.010 references the 1999 NEC (stale codification), superseded by § 15A-1-204.. Local amendments apply — see the Pleasant View overview page for the full list.

Pleasant View's permit history isn't searchable here yet

This page covers what the permit requires. What we don't have for Pleasant View yet is the record of permits actually issued — the history you'd search by street address. That is a gap in our coverage, not a statement about any particular property.

Your email, and the place — never an address. We only use it to tell you when Pleasant View lands. Privacy.

Other permits in Pleasant View

Residential Building PermitElectrical PermitPlumbing PermitMechanical / HVAC PermitRe-Roof Permit (2nd or 3rd Layer)Commercial Building PermitCommercial Tenant Improvement / Tenant Finish PermitSign PermitCertificate of Occupancy / Change of Use (Business License Route)EV Charger / EVSE PermitSolar PV / Solar Panel Installation PermitFire Sprinkler / Fire Suppression System Permit

Fire Alarm System Permit in other cities

Alpine, UtahAmerican Fork, UtahBountiful, UtahBrigham City, UtahCedar City, UtahCedar Hills, UtahCenterville, UtahClearfield, Utah

Compare fire alarm system permit fees across Utah →

Look up this fee in a different city →

Embed this data card →

Now live

Build your Pleasant View project checklist

Describe your project once and get every permit, document, and fee it triggers in Pleasant View — in one checklist. Free, for any city and any number of projects.

Get started →